blob: 2849dbc59e11738a3f7d2a9e063e6700eec7b694 [file] [log] [blame]
// -------------------------------------------------------------------------
// Copyright (c) 2001, Dr Brian Gladman < >, Worcester, UK.
// All rights reserved.
//
// LICENSE TERMS
//
// The free distribution and use of this software in both source and binary
// form is allowed (with or without changes) provided that:
//
// 1. distributions of this source code include the above copyright
// notice, this list of conditions and the following disclaimer//
//
// 2. distributions in binary form include the above copyright
// notice, this list of conditions and the following disclaimer
// in the documentation and/or other associated materials//
//
// 3. the copyright holder's name is not used to endorse products
// built using this software without specific written permission.
//
//
// ALTERNATIVELY, provided that this notice is retained in full, this product
// may be distributed under the terms of the GNU General Public License (GPL),
// in which case the provisions of the GPL apply INSTEAD OF those given above.
//
// Copyright (c) 2004 Linus Torvalds <torvalds@osdl.org>
// Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
// DISCLAIMER
//
// This software is provided 'as is' with no explicit or implied warranties
// in respect of its properties including, but not limited to, correctness
// and fitness for purpose.
// -------------------------------------------------------------------------
// Issue Date: 29/07/2002
.file "aes-i586-asm.S"
.text
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#define tlen 1024 // length of each of 4 'xor' arrays (256 32-bit words)
/* offsets to parameters with one register pushed onto stack */
#define ctx 8
#define out_blk 12
#define in_blk 16
/* offsets in crypto_aes_ctx structure */
#define klen (480)
#define ekey (0)
#define dkey (240)
// register mapping for encrypt and decrypt subroutines
#define r0 eax
#define r1 ebx
#define r2 ecx
#define r3 edx
#define r4 esi
#define r5 edi
#define eaxl al
#define eaxh ah
#define ebxl bl
#define ebxh bh
#define ecxl cl
#define ecxh ch
#define edxl dl
#define edxh dh
#define _h(reg) reg##h
#define h(reg) _h(reg)
#define _l(reg) reg##l
#define l(reg) _l(reg)
// This macro takes a 32-bit word representing a column and uses
// each of its four bytes to index into four tables of 256 32-bit
// words to obtain values that are then xored into the appropriate
// output registers r0, r1, r4 or r5.
// Parameters:
// table table base address
// %1 out_state[0]
// %2 out_state[1]
// %3 out_state[2]
// %4 out_state[3]
// idx input register for the round (destroyed)
// tmp scratch register for the round
// sched key schedule
#define do_col(table, a1,a2,a3,a4, idx, tmp) \
movzx %l(idx),%tmp; \
xor table(,%tmp,4),%a1; \
movzx %h(idx),%tmp; \
shr $16,%idx; \
xor table+tlen(,%tmp,4),%a2; \
movzx %l(idx),%tmp; \
movzx %h(idx),%idx; \
xor table+2*tlen(,%tmp,4),%a3; \
xor table+3*tlen(,%idx,4),%a4;
// initialise output registers from the key schedule
// NB1: original value of a3 is in idx on exit
// NB2: original values of a1,a2,a4 aren't used
#define do_fcol(table, a1,a2,a3,a4, idx, tmp, sched) \
mov 0 sched,%a1; \
movzx %l(idx),%tmp; \
mov 12 sched,%a2; \
xor table(,%tmp,4),%a1; \
mov 4 sched,%a4; \
movzx %h(idx),%tmp; \
shr $16,%idx; \
xor table+tlen(,%tmp,4),%a2; \
movzx %l(idx),%tmp; \
movzx %h(idx),%idx; \
xor table+3*tlen(,%idx,4),%a4; \
mov %a3,%idx; \
mov 8 sched,%a3; \
xor table+2*tlen(,%tmp,4),%a3;
// initialise output registers from the key schedule
// NB1: original value of a3 is in idx on exit
// NB2: original values of a1,a2,a4 aren't used
#define do_icol(table, a1,a2,a3,a4, idx, tmp, sched) \
mov 0 sched,%a1; \
movzx %l(idx),%tmp; \
mov 4 sched,%a2; \
xor table(,%tmp,4),%a1; \
mov 12 sched,%a4; \
movzx %h(idx),%tmp; \
shr $16,%idx; \
xor table+tlen(,%tmp,4),%a2; \
movzx %l(idx),%tmp; \
movzx %h(idx),%idx; \
xor table+3*tlen(,%idx,4),%a4; \
mov %a3,%idx; \
mov 8 sched,%a3; \
xor table+2*tlen(,%tmp,4),%a3;
// original Gladman had conditional saves to MMX regs.
#define save(a1, a2) \
mov %a2,4*a1(%esp)
#define restore(a1, a2) \
mov 4*a2(%esp),%a1
// These macros perform a forward encryption cycle. They are entered with
// the first previous round column values in r0,r1,r4,r5 and
// exit with the final values in the same registers, using stack
// for temporary storage.
// round column values
// on entry: r0,r1,r4,r5
// on exit: r2,r1,r4,r5
#define fwd_rnd1(arg, table) \
save (0,r1); \
save (1,r5); \
\
/* compute new column values */ \
do_fcol(table, r2,r5,r4,r1, r0,r3, arg); /* idx=r0 */ \
do_col (table, r4,r1,r2,r5, r0,r3); /* idx=r4 */ \
restore(r0,0); \
do_col (table, r1,r2,r5,r4, r0,r3); /* idx=r1 */ \
restore(r0,1); \
do_col (table, r5,r4,r1,r2, r0,r3); /* idx=r5 */
// round column values
// on entry: r2,r1,r4,r5
// on exit: r0,r1,r4,r5
#define fwd_rnd2(arg, table) \
save (0,r1); \
save (1,r5); \
\
/* compute new column values */ \
do_fcol(table, r0,r5,r4,r1, r2,r3, arg); /* idx=r2 */ \
do_col (table, r4,r1,r0,r5, r2,r3); /* idx=r4 */ \
restore(r2,0); \
do_col (table, r1,r0,r5,r4, r2,r3); /* idx=r1 */ \
restore(r2,1); \
do_col (table, r5,r4,r1,r0, r2,r3); /* idx=r5 */
// These macros performs an inverse encryption cycle. They are entered with
// the first previous round column values in r0,r1,r4,r5 and
// exit with the final values in the same registers, using stack
// for temporary storage
// round column values
// on entry: r0,r1,r4,r5
// on exit: r2,r1,r4,r5
#define inv_rnd1(arg, table) \
save (0,r1); \
save (1,r5); \
\
/* compute new column values */ \
do_icol(table, r2,r1,r4,r5, r0,r3, arg); /* idx=r0 */ \
do_col (table, r4,r5,r2,r1, r0,r3); /* idx=r4 */ \
restore(r0,0); \
do_col (table, r1,r4,r5,r2, r0,r3); /* idx=r1 */ \
restore(r0,1); \
do_col (table, r5,r2,r1,r4, r0,r3); /* idx=r5 */
// round column values
// on entry: r2,r1,r4,r5
// on exit: r0,r1,r4,r5
#define inv_rnd2(arg, table) \
save (0,r1); \
save (1,r5); \
\
/* compute new column values */ \
do_icol(table, r0,r1,r4,r5, r2,r3, arg); /* idx=r2 */ \
do_col (table, r4,r5,r0,r1, r2,r3); /* idx=r4 */ \
restore(r2,0); \
do_col (table, r1,r4,r5,r0, r2,r3); /* idx=r1 */ \
restore(r2,1); \
do_col (table, r5,r0,r1,r4, r2,r3); /* idx=r5 */
// AES (Rijndael) Encryption Subroutine
/* void aes_enc_blk(struct crypto_aes_ctx *ctx, u8 *out_blk, const u8 *in_blk) */
.extern crypto_ft_tab
.extern crypto_fl_tab
ENTRY(aes_enc_blk)
push %ebp
mov ctx(%esp),%ebp
// CAUTION: the order and the values used in these assigns
// rely on the register mappings
1: push %ebx
mov in_blk+4(%esp),%r2
push %esi
mov klen(%ebp),%r3 // key size
push %edi
#if ekey != 0
lea ekey(%ebp),%ebp // key pointer
#endif
// input four columns and xor in first round key
mov (%r2),%r0
mov 4(%r2),%r1
mov 8(%r2),%r4
mov 12(%r2),%r5
xor (%ebp),%r0
xor 4(%ebp),%r1
xor 8(%ebp),%r4
xor 12(%ebp),%r5
sub $8,%esp // space for register saves on stack
add $16,%ebp // increment to next round key
cmp $24,%r3
jb 4f // 10 rounds for 128-bit key
lea 32(%ebp),%ebp
je 3f // 12 rounds for 192-bit key
lea 32(%ebp),%ebp
2: fwd_rnd1( -64(%ebp), crypto_ft_tab) // 14 rounds for 256-bit key
fwd_rnd2( -48(%ebp), crypto_ft_tab)
3: fwd_rnd1( -32(%ebp), crypto_ft_tab) // 12 rounds for 192-bit key
fwd_rnd2( -16(%ebp), crypto_ft_tab)
4: fwd_rnd1( (%ebp), crypto_ft_tab) // 10 rounds for 128-bit key
fwd_rnd2( +16(%ebp), crypto_ft_tab)
fwd_rnd1( +32(%ebp), crypto_ft_tab)
fwd_rnd2( +48(%ebp), crypto_ft_tab)
fwd_rnd1( +64(%ebp), crypto_ft_tab)
fwd_rnd2( +80(%ebp), crypto_ft_tab)
fwd_rnd1( +96(%ebp), crypto_ft_tab)
fwd_rnd2(+112(%ebp), crypto_ft_tab)
fwd_rnd1(+128(%ebp), crypto_ft_tab)
fwd_rnd2(+144(%ebp), crypto_fl_tab) // last round uses a different table
// move final values to the output array. CAUTION: the
// order of these assigns rely on the register mappings
add $8,%esp
mov out_blk+12(%esp),%ebp
mov %r5,12(%ebp)
pop %edi
mov %r4,8(%ebp)
pop %esi
mov %r1,4(%ebp)
pop %ebx
mov %r0,(%ebp)
pop %ebp
ret
ENDPROC(aes_enc_blk)
// AES (Rijndael) Decryption Subroutine
/* void aes_dec_blk(struct crypto_aes_ctx *ctx, u8 *out_blk, const u8 *in_blk) */
.extern crypto_it_tab
.extern crypto_il_tab
ENTRY(aes_dec_blk)
push %ebp
mov ctx(%esp),%ebp
// CAUTION: the order and the values used in these assigns
// rely on the register mappings
1: push %ebx
mov in_blk+4(%esp),%r2
push %esi
mov klen(%ebp),%r3 // key size
push %edi
#if dkey != 0
lea dkey(%ebp),%ebp // key pointer
#endif
// input four columns and xor in first round key
mov (%r2),%r0
mov 4(%r2),%r1
mov 8(%r2),%r4
mov 12(%r2),%r5
xor (%ebp),%r0
xor 4(%ebp),%r1
xor 8(%ebp),%r4
xor 12(%ebp),%r5
sub $8,%esp // space for register saves on stack
add $16,%ebp // increment to next round key
cmp $24,%r3
jb 4f // 10 rounds for 128-bit key
lea 32(%ebp),%ebp
je 3f // 12 rounds for 192-bit key
lea 32(%ebp),%ebp
2: inv_rnd1( -64(%ebp), crypto_it_tab) // 14 rounds for 256-bit key
inv_rnd2( -48(%ebp), crypto_it_tab)
3: inv_rnd1( -32(%ebp), crypto_it_tab) // 12 rounds for 192-bit key
inv_rnd2( -16(%ebp), crypto_it_tab)
4: inv_rnd1( (%ebp), crypto_it_tab) // 10 rounds for 128-bit key
inv_rnd2( +16(%ebp), crypto_it_tab)
inv_rnd1( +32(%ebp), crypto_it_tab)
inv_rnd2( +48(%ebp), crypto_it_tab)
inv_rnd1( +64(%ebp), crypto_it_tab)
inv_rnd2( +80(%ebp), crypto_it_tab)
inv_rnd1( +96(%ebp), crypto_it_tab)
inv_rnd2(+112(%ebp), crypto_it_tab)
inv_rnd1(+128(%ebp), crypto_it_tab)
inv_rnd2(+144(%ebp), crypto_il_tab) // last round uses a different table
// move final values to the output array. CAUTION: the
// order of these assigns rely on the register mappings
add $8,%esp
mov out_blk+12(%esp),%ebp
mov %r5,12(%ebp)
pop %edi
mov %r4,8(%ebp)
pop %esi
mov %r1,4(%ebp)
pop %ebx
mov %r0,(%ebp)
pop %ebp
ret
ENDPROC(aes_dec_blk)