blob: 1131cf75acc67ff024984037273a5f6db1c564f3 [file] [log] [blame]
menuconfig POWER_RESET
bool "Board level reset or power off"
help
Provides a number of drivers which either reset a complete board
or shut it down, by manipulating the main power supply on the board.
Say Y here to enable board reset and power off
if POWER_RESET
config POWER_RESET_AS3722
bool "ams AS3722 power-off driver"
depends on MFD_AS3722
help
This driver supports turning off board via a ams AS3722 power-off.
config POWER_RESET_AT91_POWEROFF
tristate "Atmel AT91 poweroff driver"
depends on ARCH_AT91
default SOC_AT91SAM9 || SOC_SAMA5
help
This driver supports poweroff for Atmel AT91SAM9 and SAMA5
SoCs
config POWER_RESET_AT91_RESET
tristate "Atmel AT91 reset driver"
depends on ARCH_AT91
default SOC_AT91SAM9 || SOC_SAMA5
help
This driver supports restart for Atmel AT91SAM9 and SAMA5
SoCs
config POWER_RESET_AXXIA
bool "LSI Axxia reset driver"
depends on ARCH_AXXIA
help
This driver supports restart for Axxia SoC.
Say Y if you have an Axxia family SoC.
config POWER_RESET_BRCMSTB
bool "Broadcom STB reset driver"
depends on ARM || MIPS || COMPILE_TEST
depends on MFD_SYSCON
default ARCH_BRCMSTB
help
This driver provides restart support for Broadcom STB boards.
Say Y here if you have a Broadcom STB board and you wish
to have restart support.
config POWER_RESET_GPIO
bool "GPIO power-off driver"
depends on OF_GPIO
help
This driver supports turning off your board via a GPIO line.
If your board needs a GPIO high/low to power down, say Y and
create a binding in your devicetree.
config POWER_RESET_GPIO_RESTART
bool "GPIO restart driver"
depends on OF_GPIO
help
This driver supports restarting your board via a GPIO line.
If your board needs a GPIO high/low to restart, say Y and
create a binding in your devicetree.
config POWER_RESET_HISI
bool "Hisilicon power-off driver"
depends on ARCH_HISI
help
Reboot support for Hisilicon boards.
config POWER_RESET_IMX
bool "IMX6 power-off driver"
depends on POWER_RESET && SOC_IMX6
help
This driver support power off external PMIC by PMIC_ON_REQ on i.mx6
boards.If you want to use other pin to control external power,please
say N here or disable in dts to make sure pm_power_off never be
overwrote wrongly by this driver.
config POWER_RESET_MSM
bool "Qualcomm MSM power-off driver"
depends on ARCH_QCOM
help
Power off and restart support for Qualcomm boards.
config POWER_RESET_LTC2952
bool "LTC2952 PowerPath power-off driver"
depends on OF_GPIO
help
This driver supports an external powerdown trigger and board power
down via the LTC2952. Bindings are made in the device tree.
config POWER_RESET_QNAP
bool "QNAP power-off driver"
depends on OF_GPIO && PLAT_ORION
help
This driver supports turning off QNAP NAS devices by sending
commands to the microcontroller which controls the main power.
Say Y if you have a QNAP NAS.
config POWER_RESET_RESTART
bool "Restart power-off driver"
help
Some boards don't actually have the ability to power off.
Instead they restart, and u-boot holds the SoC until the
user presses a key. u-boot then boots into Linux.
config POWER_RESET_ST
bool "ST restart driver"
depends on ARCH_STI
help
Reset support for STMicroelectronics boards.
config POWER_RESET_VERSATILE
bool "ARM Versatile family reboot driver"
depends on ARM
depends on MFD_SYSCON
depends on OF
help
Power off and restart support for ARM Versatile family of
reference boards.
config POWER_RESET_VEXPRESS
bool "ARM Versatile Express power-off and reset driver"
depends on ARM || ARM64
depends on VEXPRESS_CONFIG
help
Power off and reset support for the ARM Ltd. Versatile
Express boards.
config POWER_RESET_XGENE
bool "APM SoC X-Gene reset driver"
depends on ARM64
help
Reboot support for the APM SoC X-Gene Eval boards.
config POWER_RESET_KEYSTONE
bool "Keystone reset driver"
depends on ARCH_KEYSTONE
select MFD_SYSCON
help
Reboot support for the KEYSTONE SoCs.
config POWER_RESET_SYSCON
bool "Generic SYSCON regmap reset driver"
depends on OF
select MFD_SYSCON
help
Reboot support for generic SYSCON mapped register reset.
config POWER_RESET_SYSCON_POWEROFF
bool "Generic SYSCON regmap poweroff driver"
depends on OF
select MFD_SYSCON
help
Poweroff support for generic SYSCON mapped register poweroff.
config POWER_RESET_RMOBILE
tristate "Renesas R-Mobile reset driver"
depends on ARCH_RMOBILE || COMPILE_TEST
depends on HAS_IOMEM
help
Reboot support for Renesas R-Mobile and SH-Mobile SoCs.
config POWER_RESET_ZX
tristate "ZTE SoCs reset driver"
depends on ARCH_ZX || COMPILE_TEST
depends on HAS_IOMEM
help
Reboot support for ZTE SoCs.
endif