/*
 * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
 * device tree source
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <dt-bindings/sound/samsung-i2s.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/maxim,max77686.h>
#include "exynos4412.dtsi"
#include <dt-bindings/gpio/gpio.h>

/ {
	chosen {
		stdout-path = &serial_1;
	};

	firmware@0204F000 {
		compatible = "samsung,secure-firmware";
		reg = <0x0204F000 0x1000>;
	};

	gpio_keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&gpio_power_key>;

		power_key {
			interrupt-parent = <&gpx1>;
			interrupts = <3 0>;
			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_POWER>;
			label = "power key";
			debounce-interval = <10>;
			gpio-key,wakeup;
		};
	};

	sound: sound {
		compatible = "simple-audio-card";
		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
				<&clock_audss EXYNOS_MOUT_I2S>,
				<&clock_audss EXYNOS_DOUT_SRP>,
				<&clock_audss EXYNOS_DOUT_AUD_BUS>;
		assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
				<&clock_audss EXYNOS_MOUT_AUDSS>;
		assigned-clock-rates = <0>,
				<0>,
				<192000000>,
				<19200000>;

		simple-audio-card,format = "i2s";
		simple-audio-card,bitclock-master = <&link0_codec>;
		simple-audio-card,frame-master = <&link0_codec>;

		simple-audio-card,cpu {
			sound-dai = <&i2s0 0>;
			system-clock-frequency = <19200000>;
		};

		link0_codec: simple-audio-card,codec {
			sound-dai = <&max98090>;
			clocks = <&i2s0 CLK_I2S_CDCLK>;
		};
	};

	emmc_pwrseq: pwrseq {
		pinctrl-0 = <&sd1_cd>;
		pinctrl-names = "default";
		compatible = "mmc-pwrseq-emmc";
		reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
	};

	camera {
		status = "okay";
		pinctrl-names = "default";
		pinctrl-0 = <>;
	};

	fixed-rate-clocks {
		xxti {
			compatible = "samsung,clock-xxti";
			clock-frequency = <0>;
		};

		xusbxti {
			compatible = "samsung,clock-xusbxti";
			clock-frequency = <24000000>;
		};
	};

	thermal-zones {
		cpu_thermal: cpu-thermal {
			cooling-maps {
				map0 {
				     /* Corresponds to 800MHz at freq_table */
				     cooling-device = <&cpu0 7 7>;
				};
				map1 {
				     /* Corresponds to 200MHz at freq_table */
				     cooling-device = <&cpu0 13 13>;
			       };
		       };
		};
	};
};

&cpu0 {
	cpu0-supply = <&buck2_reg>;
};

/* RSTN signal for eMMC */
&sd1_cd {
	samsung,pin-pud = <0>;
	samsung,pin-drv = <0>;
};

&pinctrl_1 {
	gpio_power_key: power_key {
		samsung,pins = "gpx1-3";
		samsung,pin-pud = <0>;
	};

	max77686_irq: max77686-irq {
		samsung,pins = "gpx3-2";
		samsung,pin-function = <0>;
		samsung,pin-pud = <0>;
		samsung,pin-drv = <0>;
	};

	hdmi_hpd: hdmi-hpd {
		samsung,pins = "gpx3-7";
		samsung,pin-pud = <1>;
	};
};

&ehci {
	status = "okay";
};

&exynos_usbphy {
	status = "okay";
};

&fimc_0 {
	status = "okay";
	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
			<&clock CLK_SCLK_FIMC0>;
	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	assigned-clock-rates = <0>, <176000000>;
};

&fimc_1 {
	status = "okay";
	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
			<&clock CLK_SCLK_FIMC1>;
	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	assigned-clock-rates = <0>, <176000000>;
};

&fimc_2 {
	status = "okay";
	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
			<&clock CLK_SCLK_FIMC2>;
	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	assigned-clock-rates = <0>, <176000000>;
};

&fimc_3 {
	status = "okay";
	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
			<&clock CLK_SCLK_FIMC3>;
	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	assigned-clock-rates = <0>, <176000000>;
};

&g2d {
	status = "okay";
};

&hdmi {
	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&hdmi_hpd>;
	vdd-supply = <&ldo8_reg>;
	vdd_osc-supply = <&ldo10_reg>;
	vdd_pll-supply = <&ldo8_reg>;
	ddc = <&i2c_2>;
	status = "okay";
};

&hsotg {
	dr_mode = "peripheral";
	status = "okay";
	vusb_d-supply = <&ldo15_reg>;
	vusb_a-supply = <&ldo12_reg>;
};

&i2c_0 {
	samsung,i2c-sda-delay = <100>;
	samsung,i2c-max-bus-freq = <400000>;
	status = "okay";

	usb3503: usb3503@08 {
		compatible = "smsc,usb3503";
		reg = <0x08>;

		intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
		connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
		reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
		initial-mode = <1>;
	};

	max77686: pmic@09 {
		compatible = "maxim,max77686";
		interrupt-parent = <&gpx3>;
		interrupts = <2 0>;
		pinctrl-names = "default";
		pinctrl-0 = <&max77686_irq>;
		reg = <0x09>;
		#clock-cells = <1>;

		voltage-regulators {
			ldo1_reg: LDO1 {
				regulator-name = "VDD_ALIVE_1.0V";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
			};

			ldo2_reg: LDO2 {
				regulator-name = "VDDQ_M1_2_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo3_reg: LDO3 {
				regulator-name = "VDDQ_EXT_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo4_reg: LDO4 {
				regulator-name = "VDDQ_MMC2_2.8V";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo5_reg: LDO5 {
				regulator-name = "VDDQ_MMC1_3_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo6_reg: LDO6 {
				regulator-name = "VDD10_MPLL_1.0V";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
			};

			ldo7_reg: LDO7 {
				regulator-name = "VDD10_XPLL_1.0V";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
			};

			ldo8_reg: LDO8 {
				regulator-name = "VDD10_HDMI_1.0V";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
			};

			ldo10_reg: LDO10 {
				regulator-name = "VDDQ_MIPIHSI_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
			};

			ldo11_reg: LDO11 {
				regulator-name = "VDD18_ABB1_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo12_reg: LDO12 {
				regulator-name = "VDD33_USB_3.3V";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo13_reg: LDO13 {
				regulator-name = "VDDQ_C2C_W_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo14_reg: LDO14 {
				regulator-name = "VDD18_ABB0_2_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo15_reg: LDO15 {
				regulator-name = "VDD10_HSIC_1.0V";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo16_reg: LDO16 {
				regulator-name = "VDD18_HSIC_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo20_reg: LDO20 {
				regulator-name = "LDO20_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-boot-on;
			};

			ldo21_reg: LDO21 {
				regulator-name = "LDO21_3.3V";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo25_reg: LDO25 {
				regulator-name = "VDDQ_LCD_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck1_reg: BUCK1 {
				regulator-name = "vdd_mif";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck2_reg: BUCK2 {
				regulator-name = "vdd_arm";
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <1350000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck3_reg: BUCK3 {
				regulator-name = "vdd_int";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck4_reg: BUCK4 {
				regulator-name = "vdd_g3d";
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <1100000>;
				regulator-microvolt-offset = <50000>;
			};

			buck5_reg: BUCK5 {
				regulator-name = "VDDQ_CKEM1_2_1.2V";
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck6_reg: BUCK6 {
				regulator-name = "BUCK6_1.35V";
				regulator-min-microvolt = <1350000>;
				regulator-max-microvolt = <1350000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck7_reg: BUCK7 {
				regulator-name = "BUCK7_2.0V";
				regulator-min-microvolt = <2000000>;
				regulator-max-microvolt = <2000000>;
				regulator-always-on;
			};

			buck8_reg: BUCK8 {
				regulator-name = "BUCK8_2.8V";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
			};
		};
	};
};

&i2c_1 {
	status = "okay";
	max98090: max98090@10 {
		compatible = "maxim,max98090";
		reg = <0x10>;
		interrupt-parent = <&gpx0>;
		interrupts = <0 0>;
		clocks = <&i2s0 CLK_I2S_CDCLK>;
		clock-names = "mclk";
		#sound-dai-cells = <0>;
	};
};

&i2c_2 {
	status = "okay";
};

&i2c_8 {
	status = "okay";
};

&i2s0 {
	pinctrl-0 = <&i2s0_bus>;
	pinctrl-names = "default";
	status = "okay";
	clocks = <&clock_audss EXYNOS_I2S_BUS>,
		 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
		 <&clock_audss EXYNOS_SCLK_I2S>;
	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
};

&mixer {
	status = "okay";
};

&mshc_0 {
	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
	pinctrl-names = "default";
	vmmc-supply = <&ldo20_reg &buck8_reg>;
	mmc-pwrseq = <&emmc_pwrseq>;
	status = "okay";

	num-slots = <1>;
	broken-cd;
	card-detect-delay = <200>;
	samsung,dw-mshc-ciu-div = <3>;
	samsung,dw-mshc-sdr-timing = <2 3>;
	samsung,dw-mshc-ddr-timing = <1 2>;
	bus-width = <8>;
	cap-mmc-highspeed;
};

&rtc {
	status = "okay";
	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
	clock-names = "rtc", "rtc_src";
};

&sdhci_2 {
	bus-width = <4>;
	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
	pinctrl-names = "default";
	vmmc-supply = <&ldo4_reg &ldo21_reg>;
	cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
	cd-inverted;
	status = "okay";
};

&serial_0 {
	status = "okay";
};

&serial_1 {
	status = "okay";
};

&tmu {
	vtmu-supply = <&ldo10_reg>;
	status = "okay";
};

&watchdog {
	status = "okay";
};