/***************************************************************************
 *     Copyright (c) 1999-2010, Broadcom Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 *
 * Module Description:
 *                     DO NOT EDIT THIS FILE DIRECTLY
 *
 * This module was generated magically with RDB from a source description
 * file. You must edit the source file for changes to be made to this file.
 *
 *
 * Date:           Generated on         Fri May  7 20:17:18 2010
 *                 MD5 Checksum         9170aeef162fecc7d1a70fbd8134c303
 *
 * Compiled with:  RDB Utility          combo_header.pl
 *                 RDB Parser           3.0
 *                 unknown              unknown
 *                 Perl Interpreter     5.008008
 *                 Operating System     linux
 *
 * Revision History:
 *
 * $brcm_Log: /magnum/basemodules/chp/7468/rdb/b0/bchp_clk.h $
 * 
 * Hydra_Software_Devel/1   5/7/10 10:06p albertl
 * SW7468-226: Initial revision.
 *
 ***************************************************************************/

#ifndef BCHP_CLK_H__
#define BCHP_CLK_H__

/***************************************************************************
 *CLK - CLOCK_GEN Registers
 ***************************************************************************/
#define BCHP_CLK_REVISION                        0x00330000 /* clock_gen Revision register */
#define BCHP_CLK_BVN_TOP_CLK_PM_CTRL             0x00330004 /* Software power management control to turn off BVN_TOP system 216/108 MHz clocks */
#define BCHP_CLK_M2MC_CLK_PM_CTRL                0x00330008 /* Software power management control to turn off M2MC in BVN system 216/108 MHz clocks */
#define BCHP_CLK_MEMSYS_CLK_PM_CTRL              0x0033003c /* Software power management control to turn off MEMSYS system 216/108 MHz clocks */
#define BCHP_CLK_SECTOP_DMA_CLK_PM_CTRL          0x00330040 /* Software power management control to turn off SECTOP DMA 216 MHz clocks */
#define BCHP_CLK_USB_CLK_PM_CTRL                 0x00330044 /* Software power management control to turn off USB system 216/108 and 54 MHz clocks */
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL              0x00330048 /* Software power management control to turn off DVP_HT clock */
#define BCHP_CLK_RPT_AIO_CLK_PM_CTRL             0x00330050 /* Software power management control to turn off RPT_AIO  clocks */
#define BCHP_CLK_GENET_CLK_PM_CTRL               0x00330054 /* Software power management control to turn off GENET  clocks */
#define BCHP_CLK_AVD0_CLK_PM_CTRL                0x00330058 /* Software power management control to turn off AVD0  clocks */
#define BCHP_CLK_XPT_CLK_PM_CTRL                 0x00330060 /* Software power management control to turn off core_xpt  clocks */
#define BCHP_CLK_SUN_UART_CLK_PM_CTRL            0x00330064 /* Software power management control to turn off UART clocks in sundry */
#define BCHP_CLK_SUN_27M_CLK_PM_CTRL             0x00330070 /* Software power management control to turn off 27 MHz clock in sundry */
#define BCHP_CLK_VEC_CLK_PM_CTRL                 0x00330074 /* Software power management control to turn off VEC clocks */
#define BCHP_CLK_QDAC_CLK_PM_CTRL                0x00330078 /* Software power management control to turn off QDAC clocks */
#define BCHP_CLK_HIF_SPI_CLK_PM_CTRL             0x00330080 /* Software power management control to turn off SDIO clock in hif */
#define BCHP_CLK_HIF_SDIO_CLK_PM_CTRL            0x00330084 /* Software power management control to turn off SDIO clock in hif */
#define BCHP_CLK_PM_PLL_ALIVE_SEL                0x0033009c /* Software power management control to select certain PLL still alive even in standby mode with all PLLs off */
#define BCHP_CLK_PLL_TIMER_SELECT                0x003300a0 /* Chip PLL programmable wait time after leaving the standby mode */
#define BCHP_CLK_MISC                            0x003300a4 /* clock_gen block output clock selection */
#define BCHP_CLK_THIRD_OT_CONTROL_1              0x003300a8 /* Low 3rd Overtone Oscillator Control registers */
#define BCHP_CLK_PLL_LOCK_STATUS                 0x003300ac /* current lock status of main PLL */
#define BCHP_CLK_SYS_PLL_1_CTLBUS_HI             0x003300c0 /* SYS 1 PLL control bus higher word */
#define BCHP_CLK_SYS_PLL_1_CTLBUS_LO             0x003300c4 /* SYS 1 PLL control bus lower word */
#define BCHP_CLK_SYS_PLL_1_CLOCK_ENA             0x003300c8 /* SYS PLL 1 clock outputs enable */
#define BCHP_CLK_SYS_PLL_1_1                     0x003300d0 /* SYS_PLL_1 channel 1: 50 MHz SPI clock,  PLL source post divider powerdown */
#define BCHP_CLK_SYS_PLL_1_3                     0x003300d4 /* SYS_PLL_1 channel 3: AVD clock,  PLL source post divider powerdown and cml buffer enable */
#define BCHP_CLK_SYS_PLL_1_4                     0x003300d8 /* SYS_PLL_1 channel 4: 25 MHz ENET clock,  PLL source post divider powerdown */
#define BCHP_CLK_SYS_PLL_1_5                     0x003300dc /* SYS_PLL_1 channel 5: RAP clock,  PLL source post divider powerdown and cml buffer enable */
#define BCHP_CLK_SYS_PLL_1_6                     0x003300e0 /* SYS_PLL_1 channel 6: DVP_HT clock,  PLL source post divider powerdown and cml buffer enable */
#define BCHP_CLK_SYS_PLL_0_2                     0x003300f4 /* SYS_PLL_0 channel 2: 81/40.5/20.25 MHz clocks to core_xpt and audio PLL reference clocks , PLL source post divider powerdown */
#define BCHP_CLK_SYS_PLL_0_3                     0x003300f8 /* SYS_PLL_0 channel 3: 48 MHz USB PLL reference and SDIO clocks, PLL source post divider powerdown and cml buffer enable */
#define BCHP_CLK_SYS_PLL_1_CTRL                  0x00330108 /* SYS PLL 1 reset, output_delay */
#define BCHP_CLK_SYS_PLL_0_CTRL                  0x0033010c /* SYS PLL 0 reset, output_delay */
#define BCHP_CLK_MIPS_PLL_CTRL                   0x00330110 /* MIPS PLL reset, ch_disable, cpu frequency select, output_delay and powerdown */
#define BCHP_CLK_SPI_50_DIV                      0x00330118 /* SYS PLL 1 SPI 50 MHz clock divider settings */
#define BCHP_CLK_DVP_HT_DIV                      0x00330120 /* SYS PLL 1 DVP_HT clock divider settings */
#define BCHP_CLK_AVD_DIV                         0x00330124 /* SYS PLL 1 AVD clock divider settings */
#define BCHP_CLK_RAP_DIV                         0x00330128 /* SYS PLL RAP clock divider settings */
#define BCHP_CLK_D2CDIFF_AC_CTRL                 0x0033012c /* AC_CTRL for D2CDIFF */
#define BCHP_CLK_VIEW_CLOCK_SELECT               0x00330140 /* View clock counter clock/lock_bit selection */
#define BCHP_CLK_RING_OSC_ENABLE                 0x00330144 /* Enable Ring Oscillators */
#define BCHP_CLK_REF_CLOCK_COUNTER               0x00330148 /* Reference Clock Counter */
#define BCHP_CLK_VIEW_CLOCK_COUNTER              0x0033014c /* View Clock Counter */
#define BCHP_CLK_RESET_COUNTER                   0x00330150 /* Reset counters */
#define BCHP_CLK_STOP_COUNTER                    0x00330154 /* Stop counters */
#define BCHP_CLK_IN_RANGE                        0x00330158 /* View clock counter is in range */
#define BCHP_CLK_SWREG_VALUE                     0x0033015c /* Hold SWREG related control values */
#define BCHP_CLK_OTP_SWREG_VALUE                 0x00330160 /* Hold SWREG related control values from OTP */
#define BCHP_CLK_UVREG_VALUE                     0x00330164 /* Hold UVREG related control values */
#define BCHP_CLK_OTP_UVREG_VALUE                 0x00330168 /* Hold UVREG related control values from OTP */
#define BCHP_CLK_RO_TEST_SUB_BLOCK_SEL           0x0033016c /* additional select/control values that can be used  for OSC pads */
#define BCHP_CLK_SCRATCH                         0x0033023c /* clock_gen  Scratch register */

/***************************************************************************
 *REVISION - clock_gen Revision register
 ***************************************************************************/
/* CLK :: REVISION :: reserved0 [31:16] */
#define BCHP_CLK_REVISION_reserved0_MASK                           0xffff0000
#define BCHP_CLK_REVISION_reserved0_SHIFT                          16

/* CLK :: REVISION :: MAJOR [15:08] */
#define BCHP_CLK_REVISION_MAJOR_MASK                               0x0000ff00
#define BCHP_CLK_REVISION_MAJOR_SHIFT                              8

/* CLK :: REVISION :: MINOR [07:00] */
#define BCHP_CLK_REVISION_MINOR_MASK                               0x000000ff
#define BCHP_CLK_REVISION_MINOR_SHIFT                              0

/***************************************************************************
 *BVN_TOP_CLK_PM_CTRL - Software power management control to turn off BVN_TOP system 216/108 MHz clocks
 ***************************************************************************/
/* CLK :: BVN_TOP_CLK_PM_CTRL :: reserved0 [31:02] */
#define BCHP_CLK_BVN_TOP_CLK_PM_CTRL_reserved0_MASK                0xfffffffc
#define BCHP_CLK_BVN_TOP_CLK_PM_CTRL_reserved0_SHIFT               2

/* CLK :: BVN_TOP_CLK_PM_CTRL :: DIS_108M_CLK [01:01] */
#define BCHP_CLK_BVN_TOP_CLK_PM_CTRL_DIS_108M_CLK_MASK             0x00000002
#define BCHP_CLK_BVN_TOP_CLK_PM_CTRL_DIS_108M_CLK_SHIFT            1

/* CLK :: BVN_TOP_CLK_PM_CTRL :: DIS_216M_CLK [00:00] */
#define BCHP_CLK_BVN_TOP_CLK_PM_CTRL_DIS_216M_CLK_MASK             0x00000001
#define BCHP_CLK_BVN_TOP_CLK_PM_CTRL_DIS_216M_CLK_SHIFT            0

/***************************************************************************
 *M2MC_CLK_PM_CTRL - Software power management control to turn off M2MC in BVN system 216/108 MHz clocks
 ***************************************************************************/
/* CLK :: M2MC_CLK_PM_CTRL :: reserved0 [31:02] */
#define BCHP_CLK_M2MC_CLK_PM_CTRL_reserved0_MASK                   0xfffffffc
#define BCHP_CLK_M2MC_CLK_PM_CTRL_reserved0_SHIFT                  2

/* CLK :: M2MC_CLK_PM_CTRL :: DIS_108M_CLK [01:01] */
#define BCHP_CLK_M2MC_CLK_PM_CTRL_DIS_108M_CLK_MASK                0x00000002
#define BCHP_CLK_M2MC_CLK_PM_CTRL_DIS_108M_CLK_SHIFT               1

/* CLK :: M2MC_CLK_PM_CTRL :: DIS_216M_CLK [00:00] */
#define BCHP_CLK_M2MC_CLK_PM_CTRL_DIS_216M_CLK_MASK                0x00000001
#define BCHP_CLK_M2MC_CLK_PM_CTRL_DIS_216M_CLK_SHIFT               0

/***************************************************************************
 *MEMSYS_CLK_PM_CTRL - Software power management control to turn off MEMSYS system 216/108 MHz clocks
 ***************************************************************************/
/* CLK :: MEMSYS_CLK_PM_CTRL :: reserved0 [31:02] */
#define BCHP_CLK_MEMSYS_CLK_PM_CTRL_reserved0_MASK                 0xfffffffc
#define BCHP_CLK_MEMSYS_CLK_PM_CTRL_reserved0_SHIFT                2

/* CLK :: MEMSYS_CLK_PM_CTRL :: DIS_108M_CLK [01:01] */
#define BCHP_CLK_MEMSYS_CLK_PM_CTRL_DIS_108M_CLK_MASK              0x00000002
#define BCHP_CLK_MEMSYS_CLK_PM_CTRL_DIS_108M_CLK_SHIFT             1

/* CLK :: MEMSYS_CLK_PM_CTRL :: DIS_216M_CLK [00:00] */
#define BCHP_CLK_MEMSYS_CLK_PM_CTRL_DIS_216M_CLK_MASK              0x00000001
#define BCHP_CLK_MEMSYS_CLK_PM_CTRL_DIS_216M_CLK_SHIFT             0

/***************************************************************************
 *SECTOP_DMA_CLK_PM_CTRL - Software power management control to turn off SECTOP DMA 216 MHz clocks
 ***************************************************************************/
/* CLK :: SECTOP_DMA_CLK_PM_CTRL :: reserved0 [31:01] */
#define BCHP_CLK_SECTOP_DMA_CLK_PM_CTRL_reserved0_MASK             0xfffffffe
#define BCHP_CLK_SECTOP_DMA_CLK_PM_CTRL_reserved0_SHIFT            1

/* CLK :: SECTOP_DMA_CLK_PM_CTRL :: DIS_216M_CLK [00:00] */
#define BCHP_CLK_SECTOP_DMA_CLK_PM_CTRL_DIS_216M_CLK_MASK          0x00000001
#define BCHP_CLK_SECTOP_DMA_CLK_PM_CTRL_DIS_216M_CLK_SHIFT         0

/***************************************************************************
 *USB_CLK_PM_CTRL - Software power management control to turn off USB system 216/108 and 54 MHz clocks
 ***************************************************************************/
/* CLK :: USB_CLK_PM_CTRL :: reserved0 [31:03] */
#define BCHP_CLK_USB_CLK_PM_CTRL_reserved0_MASK                    0xfffffff8
#define BCHP_CLK_USB_CLK_PM_CTRL_reserved0_SHIFT                   3

/* CLK :: USB_CLK_PM_CTRL :: DIS_54M_CLK [02:02] */
#define BCHP_CLK_USB_CLK_PM_CTRL_DIS_54M_CLK_MASK                  0x00000004
#define BCHP_CLK_USB_CLK_PM_CTRL_DIS_54M_CLK_SHIFT                 2

/* CLK :: USB_CLK_PM_CTRL :: DIS_108M_CLK [01:01] */
#define BCHP_CLK_USB_CLK_PM_CTRL_DIS_108M_CLK_MASK                 0x00000002
#define BCHP_CLK_USB_CLK_PM_CTRL_DIS_108M_CLK_SHIFT                1

/* CLK :: USB_CLK_PM_CTRL :: DIS_216M_CLK [00:00] */
#define BCHP_CLK_USB_CLK_PM_CTRL_DIS_216M_CLK_MASK                 0x00000001
#define BCHP_CLK_USB_CLK_PM_CTRL_DIS_216M_CLK_SHIFT                0

/***************************************************************************
 *DVP_HT_CLK_PM_CTRL - Software power management control to turn off DVP_HT clock
 ***************************************************************************/
/* CLK :: DVP_HT_CLK_PM_CTRL :: reserved0 [31:07] */
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_reserved0_MASK                 0xffffff80
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_reserved0_SHIFT                7

/* CLK :: DVP_HT_CLK_PM_CTRL :: DIS_2ND_108M_CLK [06:06] */
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_2ND_108M_CLK_MASK          0x00000040
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_2ND_108M_CLK_SHIFT         6

/* CLK :: DVP_HT_CLK_PM_CTRL :: DIS_VEC_216M_CLK [05:05] */
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_VEC_216M_CLK_MASK          0x00000020
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_VEC_216M_CLK_SHIFT         5

/* CLK :: DVP_HT_CLK_PM_CTRL :: DIS_HDMI_MAX_PROG_CLK [04:04] */
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_HDMI_MAX_PROG_CLK_MASK     0x00000010
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_HDMI_MAX_PROG_CLK_SHIFT    4

/* CLK :: DVP_HT_CLK_PM_CTRL :: DIS_HDMI_27M_CLK [03:03] */
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_HDMI_27M_CLK_MASK          0x00000008
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_HDMI_27M_CLK_SHIFT         3

/* CLK :: DVP_HT_CLK_PM_CTRL :: DIS_HDMI_PM_27M_CLK [02:02] */
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_HDMI_PM_27M_CLK_MASK       0x00000004
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_HDMI_PM_27M_CLK_SHIFT      2

/* CLK :: DVP_HT_CLK_PM_CTRL :: DIS_108M_CLK [01:01] */
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_108M_CLK_MASK              0x00000002
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_108M_CLK_SHIFT             1

/* CLK :: DVP_HT_CLK_PM_CTRL :: DIS_216M_CLK [00:00] */
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_216M_CLK_MASK              0x00000001
#define BCHP_CLK_DVP_HT_CLK_PM_CTRL_DIS_216M_CLK_SHIFT             0

/***************************************************************************
 *RPT_AIO_CLK_PM_CTRL - Software power management control to turn off RPT_AIO  clocks
 ***************************************************************************/
/* CLK :: RPT_AIO_CLK_PM_CTRL :: reserved0 [31:03] */
#define BCHP_CLK_RPT_AIO_CLK_PM_CTRL_reserved0_MASK                0xfffffff8
#define BCHP_CLK_RPT_AIO_CLK_PM_CTRL_reserved0_SHIFT               3

/* CLK :: RPT_AIO_CLK_PM_CTRL :: DIS_RPT_PROG_CLK [02:02] */
#define BCHP_CLK_RPT_AIO_CLK_PM_CTRL_DIS_RPT_PROG_CLK_MASK         0x00000004
#define BCHP_CLK_RPT_AIO_CLK_PM_CTRL_DIS_RPT_PROG_CLK_SHIFT        2

/* CLK :: RPT_AIO_CLK_PM_CTRL :: DIS_108M_CLK [01:01] */
#define BCHP_CLK_RPT_AIO_CLK_PM_CTRL_DIS_108M_CLK_MASK             0x00000002
#define BCHP_CLK_RPT_AIO_CLK_PM_CTRL_DIS_108M_CLK_SHIFT            1

/* CLK :: RPT_AIO_CLK_PM_CTRL :: DIS_216M_CLK [00:00] */
#define BCHP_CLK_RPT_AIO_CLK_PM_CTRL_DIS_216M_CLK_MASK             0x00000001
#define BCHP_CLK_RPT_AIO_CLK_PM_CTRL_DIS_216M_CLK_SHIFT            0

/***************************************************************************
 *GENET_CLK_PM_CTRL - Software power management control to turn off GENET  clocks
 ***************************************************************************/
/* CLK :: GENET_CLK_PM_CTRL :: reserved0 [31:11] */
#define BCHP_CLK_GENET_CLK_PM_CTRL_reserved0_MASK                  0xfffff800
#define BCHP_CLK_GENET_CLK_PM_CTRL_reserved0_SHIFT                 11

/* CLK :: GENET_CLK_PM_CTRL :: DIS_GENET_RGMII_PROG_CLK [10:10] */
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_RGMII_PROG_CLK_MASK   0x00000400
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_RGMII_PROG_CLK_SHIFT  10

/* CLK :: GENET_CLK_PM_CTRL :: DIS_GENET_UNIMAC_SYS_RX_27_54M_CLK [09:09] */
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_UNIMAC_SYS_RX_27_54M_CLK_MASK 0x00000200
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_UNIMAC_SYS_RX_27_54M_CLK_SHIFT 9

/* CLK :: GENET_CLK_PM_CTRL :: DIS_GENET_UNIMAC_SYS_TX_27_54M_CLK [08:08] */
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_UNIMAC_SYS_TX_27_54M_CLK_MASK 0x00000100
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_UNIMAC_SYS_TX_27_54M_CLK_SHIFT 8

/* CLK :: GENET_CLK_PM_CTRL :: reserved1 [07:07] */
#define BCHP_CLK_GENET_CLK_PM_CTRL_reserved1_MASK                  0x00000080
#define BCHP_CLK_GENET_CLK_PM_CTRL_reserved1_SHIFT                 7

/* CLK :: GENET_CLK_PM_CTRL :: DIS_GENET_COMMON_27_54M_CLK [06:06] */
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_COMMON_27_54M_CLK_MASK 0x00000040
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_COMMON_27_54M_CLK_SHIFT 6

/* CLK :: GENET_CLK_PM_CTRL :: DIS_GENET_HFB_27_54M_CLK [05:05] */
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_HFB_27_54M_CLK_MASK   0x00000020
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_HFB_27_54M_CLK_SHIFT  5

/* CLK :: GENET_CLK_PM_CTRL :: reserved2 [04:03] */
#define BCHP_CLK_GENET_CLK_PM_CTRL_reserved2_MASK                  0x00000018
#define BCHP_CLK_GENET_CLK_PM_CTRL_reserved2_SHIFT                 3

/* CLK :: GENET_CLK_PM_CTRL :: DIS_GENET_PM_27M_CLK [02:02] */
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_PM_27M_CLK_MASK       0x00000004
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_PM_27M_CLK_SHIFT      2

/* CLK :: GENET_CLK_PM_CTRL :: DIS_GENET_GISB_108M_CLK [01:01] */
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_GISB_108M_CLK_MASK    0x00000002
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_GENET_GISB_108M_CLK_SHIFT   1

/* CLK :: GENET_CLK_PM_CTRL :: DIS_216M_CLK [00:00] */
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_216M_CLK_MASK               0x00000001
#define BCHP_CLK_GENET_CLK_PM_CTRL_DIS_216M_CLK_SHIFT              0

/***************************************************************************
 *AVD0_CLK_PM_CTRL - Software power management control to turn off AVD0  clocks
 ***************************************************************************/
/* CLK :: AVD0_CLK_PM_CTRL :: reserved0 [31:03] */
#define BCHP_CLK_AVD0_CLK_PM_CTRL_reserved0_MASK                   0xfffffff8
#define BCHP_CLK_AVD0_CLK_PM_CTRL_reserved0_SHIFT                  3

/* CLK :: AVD0_CLK_PM_CTRL :: DIS_AVD0_PROG_CLK [02:02] */
#define BCHP_CLK_AVD0_CLK_PM_CTRL_DIS_AVD0_PROG_CLK_MASK           0x00000004
#define BCHP_CLK_AVD0_CLK_PM_CTRL_DIS_AVD0_PROG_CLK_SHIFT          2

/* CLK :: AVD0_CLK_PM_CTRL :: DIS_108M_CLK [01:01] */
#define BCHP_CLK_AVD0_CLK_PM_CTRL_DIS_108M_CLK_MASK                0x00000002
#define BCHP_CLK_AVD0_CLK_PM_CTRL_DIS_108M_CLK_SHIFT               1

/* CLK :: AVD0_CLK_PM_CTRL :: DIS_216M_CLK [00:00] */
#define BCHP_CLK_AVD0_CLK_PM_CTRL_DIS_216M_CLK_MASK                0x00000001
#define BCHP_CLK_AVD0_CLK_PM_CTRL_DIS_216M_CLK_SHIFT               0

/***************************************************************************
 *XPT_CLK_PM_CTRL - Software power management control to turn off core_xpt  clocks
 ***************************************************************************/
/* CLK :: XPT_CLK_PM_CTRL :: reserved0 [31:07] */
#define BCHP_CLK_XPT_CLK_PM_CTRL_reserved0_MASK                    0xffffff80
#define BCHP_CLK_XPT_CLK_PM_CTRL_reserved0_SHIFT                   7

/* CLK :: XPT_CLK_PM_CTRL :: DIS_XPT_27M_CLK [06:06] */
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_XPT_27M_CLK_MASK              0x00000040
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_XPT_27M_CLK_SHIFT             6

/* CLK :: XPT_CLK_PM_CTRL :: DIS_XPT_54M_CLK [05:05] */
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_XPT_54M_CLK_MASK              0x00000020
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_XPT_54M_CLK_SHIFT             5

/* CLK :: XPT_CLK_PM_CTRL :: DIS_XPT_81M_CLK [04:04] */
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_XPT_81M_CLK_MASK              0x00000010
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_XPT_81M_CLK_SHIFT             4

/* CLK :: XPT_CLK_PM_CTRL :: DIS_XPT_20P25M_CLK [03:03] */
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_XPT_20P25M_CLK_MASK           0x00000008
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_XPT_20P25M_CLK_SHIFT          3

/* CLK :: XPT_CLK_PM_CTRL :: DIS_XPT_40P5M_CLK [02:02] */
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_XPT_40P5M_CLK_MASK            0x00000004
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_XPT_40P5M_CLK_SHIFT           2

/* CLK :: XPT_CLK_PM_CTRL :: DIS_108M_CLK [01:01] */
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_108M_CLK_MASK                 0x00000002
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_108M_CLK_SHIFT                1

/* CLK :: XPT_CLK_PM_CTRL :: DIS_216M_CLK [00:00] */
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_216M_CLK_MASK                 0x00000001
#define BCHP_CLK_XPT_CLK_PM_CTRL_DIS_216M_CLK_SHIFT                0

/***************************************************************************
 *SUN_UART_CLK_PM_CTRL - Software power management control to turn off UART clocks in sundry
 ***************************************************************************/
/* CLK :: SUN_UART_CLK_PM_CTRL :: reserved0 [31:01] */
#define BCHP_CLK_SUN_UART_CLK_PM_CTRL_reserved0_MASK               0xfffffffe
#define BCHP_CLK_SUN_UART_CLK_PM_CTRL_reserved0_SHIFT              1

/* CLK :: SUN_UART_CLK_PM_CTRL :: DIS_SUN_UART_108M_CLK [00:00] */
#define BCHP_CLK_SUN_UART_CLK_PM_CTRL_DIS_SUN_UART_108M_CLK_MASK   0x00000001
#define BCHP_CLK_SUN_UART_CLK_PM_CTRL_DIS_SUN_UART_108M_CLK_SHIFT  0

/***************************************************************************
 *SUN_27M_CLK_PM_CTRL - Software power management control to turn off 27 MHz clock in sundry
 ***************************************************************************/
/* CLK :: SUN_27M_CLK_PM_CTRL :: reserved0 [31:01] */
#define BCHP_CLK_SUN_27M_CLK_PM_CTRL_reserved0_MASK                0xfffffffe
#define BCHP_CLK_SUN_27M_CLK_PM_CTRL_reserved0_SHIFT               1

/* CLK :: SUN_27M_CLK_PM_CTRL :: DIS_SUN_27M_CLK [00:00] */
#define BCHP_CLK_SUN_27M_CLK_PM_CTRL_DIS_SUN_27M_CLK_MASK          0x00000001
#define BCHP_CLK_SUN_27M_CLK_PM_CTRL_DIS_SUN_27M_CLK_SHIFT         0

/***************************************************************************
 *VEC_CLK_PM_CTRL - Software power management control to turn off VEC clocks
 ***************************************************************************/
/* CLK :: VEC_CLK_PM_CTRL :: reserved0 [31:03] */
#define BCHP_CLK_VEC_CLK_PM_CTRL_reserved0_MASK                    0xfffffff8
#define BCHP_CLK_VEC_CLK_PM_CTRL_reserved0_SHIFT                   3

/* CLK :: VEC_CLK_PM_CTRL :: DIS_VEC_DAC_216M_CLK [02:02] */
#define BCHP_CLK_VEC_CLK_PM_CTRL_DIS_VEC_DAC_216M_CLK_MASK         0x00000004
#define BCHP_CLK_VEC_CLK_PM_CTRL_DIS_VEC_DAC_216M_CLK_SHIFT        2

/* CLK :: VEC_CLK_PM_CTRL :: DIS_108M_CLK [01:01] */
#define BCHP_CLK_VEC_CLK_PM_CTRL_DIS_108M_CLK_MASK                 0x00000002
#define BCHP_CLK_VEC_CLK_PM_CTRL_DIS_108M_CLK_SHIFT                1

/* CLK :: VEC_CLK_PM_CTRL :: DIS_216M_CLK [00:00] */
#define BCHP_CLK_VEC_CLK_PM_CTRL_DIS_216M_CLK_MASK                 0x00000001
#define BCHP_CLK_VEC_CLK_PM_CTRL_DIS_216M_CLK_SHIFT                0

/***************************************************************************
 *QDAC_CLK_PM_CTRL - Software power management control to turn off QDAC clocks
 ***************************************************************************/
/* CLK :: QDAC_CLK_PM_CTRL :: reserved0 [31:01] */
#define BCHP_CLK_QDAC_CLK_PM_CTRL_reserved0_MASK                   0xfffffffe
#define BCHP_CLK_QDAC_CLK_PM_CTRL_reserved0_SHIFT                  1

/* CLK :: QDAC_CLK_PM_CTRL :: DIS_216M_CLK [00:00] */
#define BCHP_CLK_QDAC_CLK_PM_CTRL_DIS_216M_CLK_MASK                0x00000001
#define BCHP_CLK_QDAC_CLK_PM_CTRL_DIS_216M_CLK_SHIFT               0

/***************************************************************************
 *HIF_SPI_CLK_PM_CTRL - Software power management control to turn off SDIO clock in hif
 ***************************************************************************/
/* CLK :: HIF_SPI_CLK_PM_CTRL :: reserved0 [31:03] */
#define BCHP_CLK_HIF_SPI_CLK_PM_CTRL_reserved0_MASK                0xfffffff8
#define BCHP_CLK_HIF_SPI_CLK_PM_CTRL_reserved0_SHIFT               3

/* CLK :: HIF_SPI_CLK_PM_CTRL :: DIS_SPI_OUT_CLK [02:02] */
#define BCHP_CLK_HIF_SPI_CLK_PM_CTRL_DIS_SPI_OUT_CLK_MASK          0x00000004
#define BCHP_CLK_HIF_SPI_CLK_PM_CTRL_DIS_SPI_OUT_CLK_SHIFT         2

/* CLK :: HIF_SPI_CLK_PM_CTRL :: DIS_PROG_CLK [01:01] */
#define BCHP_CLK_HIF_SPI_CLK_PM_CTRL_DIS_PROG_CLK_MASK             0x00000002
#define BCHP_CLK_HIF_SPI_CLK_PM_CTRL_DIS_PROG_CLK_SHIFT            1

/* CLK :: HIF_SPI_CLK_PM_CTRL :: DIS_27M_CLK [00:00] */
#define BCHP_CLK_HIF_SPI_CLK_PM_CTRL_DIS_27M_CLK_MASK              0x00000001
#define BCHP_CLK_HIF_SPI_CLK_PM_CTRL_DIS_27M_CLK_SHIFT             0

/***************************************************************************
 *HIF_SDIO_CLK_PM_CTRL - Software power management control to turn off SDIO clock in hif
 ***************************************************************************/
/* CLK :: HIF_SDIO_CLK_PM_CTRL :: reserved0 [31:01] */
#define BCHP_CLK_HIF_SDIO_CLK_PM_CTRL_reserved0_MASK               0xfffffffe
#define BCHP_CLK_HIF_SDIO_CLK_PM_CTRL_reserved0_SHIFT              1

/* CLK :: HIF_SDIO_CLK_PM_CTRL :: DIS_HIF_SDIO_48M_CLK [00:00] */
#define BCHP_CLK_HIF_SDIO_CLK_PM_CTRL_DIS_HIF_SDIO_48M_CLK_MASK    0x00000001
#define BCHP_CLK_HIF_SDIO_CLK_PM_CTRL_DIS_HIF_SDIO_48M_CLK_SHIFT   0

/***************************************************************************
 *PM_PLL_ALIVE_SEL - Software power management control to select certain PLL still alive even in standby mode with all PLLs off
 ***************************************************************************/
/* CLK :: PM_PLL_ALIVE_SEL :: reserved0 [31:03] */
#define BCHP_CLK_PM_PLL_ALIVE_SEL_reserved0_MASK                   0xfffffff8
#define BCHP_CLK_PM_PLL_ALIVE_SEL_reserved0_SHIFT                  3

/* CLK :: PM_PLL_ALIVE_SEL :: DDR_PLL [02:02] */
#define BCHP_CLK_PM_PLL_ALIVE_SEL_DDR_PLL_MASK                     0x00000004
#define BCHP_CLK_PM_PLL_ALIVE_SEL_DDR_PLL_SHIFT                    2

/* CLK :: PM_PLL_ALIVE_SEL :: MIPS_PLL [01:01] */
#define BCHP_CLK_PM_PLL_ALIVE_SEL_MIPS_PLL_MASK                    0x00000002
#define BCHP_CLK_PM_PLL_ALIVE_SEL_MIPS_PLL_SHIFT                   1

/* CLK :: PM_PLL_ALIVE_SEL :: SYS_PLL_0 [00:00] */
#define BCHP_CLK_PM_PLL_ALIVE_SEL_SYS_PLL_0_MASK                   0x00000001
#define BCHP_CLK_PM_PLL_ALIVE_SEL_SYS_PLL_0_SHIFT                  0

/***************************************************************************
 *PLL_TIMER_SELECT - Chip PLL programmable wait time after leaving the standby mode
 ***************************************************************************/
/* CLK :: PLL_TIMER_SELECT :: reserved0 [31:02] */
#define BCHP_CLK_PLL_TIMER_SELECT_reserved0_MASK                   0xfffffffc
#define BCHP_CLK_PLL_TIMER_SELECT_reserved0_SHIFT                  2

/* CLK :: PLL_TIMER_SELECT :: TIMER [01:00] */
#define BCHP_CLK_PLL_TIMER_SELECT_TIMER_MASK                       0x00000003
#define BCHP_CLK_PLL_TIMER_SELECT_TIMER_SHIFT                      0

/***************************************************************************
 *MISC - clock_gen block output clock selection
 ***************************************************************************/
/* CLK :: MISC :: reserved0 [31:11] */
#define BCHP_CLK_MISC_reserved0_MASK                               0xfffff800
#define BCHP_CLK_MISC_reserved0_SHIFT                              11

/* CLK :: MISC :: RO_TESTOUT_EN [10:10] */
#define BCHP_CLK_MISC_RO_TESTOUT_EN_MASK                           0x00000400
#define BCHP_CLK_MISC_RO_TESTOUT_EN_SHIFT                          10

/* CLK :: MISC :: OBSRV_PLL_EN [09:09] */
#define BCHP_CLK_MISC_OBSRV_PLL_EN_MASK                            0x00000200
#define BCHP_CLK_MISC_OBSRV_PLL_EN_SHIFT                           9

/* CLK :: MISC :: HIF_SPI_CLK_SEL [08:08] */
#define BCHP_CLK_MISC_HIF_SPI_CLK_SEL_MASK                         0x00000100
#define BCHP_CLK_MISC_HIF_SPI_CLK_SEL_SHIFT                        8

/* CLK :: MISC :: GENET_CLK_SEL [07:07] */
#define BCHP_CLK_MISC_GENET_CLK_SEL_MASK                           0x00000080
#define BCHP_CLK_MISC_GENET_CLK_SEL_SHIFT                          7

/* CLK :: MISC :: GENET_GMII_TX_CLK_SEL [06:06] */
#define BCHP_CLK_MISC_GENET_GMII_TX_CLK_SEL_MASK                   0x00000040
#define BCHP_CLK_MISC_GENET_GMII_TX_CLK_SEL_SHIFT                  6

/* CLK :: MISC :: SMARTCARD_CLOCK_0_SOURCE_SEL [05:04] */
#define BCHP_CLK_MISC_SMARTCARD_CLOCK_0_SOURCE_SEL_MASK            0x00000030
#define BCHP_CLK_MISC_SMARTCARD_CLOCK_0_SOURCE_SEL_SHIFT           4

/* CLK :: MISC :: VCXOA_OUTCLK_SRC_SEL [03:02] */
#define BCHP_CLK_MISC_VCXOA_OUTCLK_SRC_SEL_MASK                    0x0000000c
#define BCHP_CLK_MISC_VCXOA_OUTCLK_SRC_SEL_SHIFT                   2

/* CLK :: MISC :: VCXOA_OUTCLK_ENABLE [01:01] */
#define BCHP_CLK_MISC_VCXOA_OUTCLK_ENABLE_MASK                     0x00000002
#define BCHP_CLK_MISC_VCXOA_OUTCLK_ENABLE_SHIFT                    1

/* CLK :: MISC :: INV_VCXO_OUTCLK_SRCA [00:00] */
#define BCHP_CLK_MISC_INV_VCXO_OUTCLK_SRCA_MASK                    0x00000001
#define BCHP_CLK_MISC_INV_VCXO_OUTCLK_SRCA_SHIFT                   0

/***************************************************************************
 *THIRD_OT_CONTROL_1 - Low 3rd Overtone Oscillator Control registers
 ***************************************************************************/
/* CLK :: THIRD_OT_CONTROL_1 :: reserved0 [31:16] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_reserved0_MASK                 0xffff0000
#define BCHP_CLK_THIRD_OT_CONTROL_1_reserved0_SHIFT                16

/* CLK :: THIRD_OT_CONTROL_1 :: GAIN_AMPLIFIER_CURRENT_CTRL [15:14] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_GAIN_AMPLIFIER_CURRENT_CTRL_MASK 0x0000c000
#define BCHP_CLK_THIRD_OT_CONTROL_1_GAIN_AMPLIFIER_CURRENT_CTRL_SHIFT 14
#define BCHP_CLK_THIRD_OT_CONTROL_1_GAIN_AMPLIFIER_CURRENT_CTRL_ONE_HUNDRED_FIFTY_MICRO_AMP 0
#define BCHP_CLK_THIRD_OT_CONTROL_1_GAIN_AMPLIFIER_CURRENT_CTRL_TWO_HUNDRED_MICRO_AMP 1
#define BCHP_CLK_THIRD_OT_CONTROL_1_GAIN_AMPLIFIER_CURRENT_CTRL_TWO_HUNDRED_FIFTY_MICRO_AMP 2
#define BCHP_CLK_THIRD_OT_CONTROL_1_GAIN_AMPLIFIER_CURRENT_CTRL_THREE_HUNDRED_MICRO_AMP 3

/* CLK :: THIRD_OT_CONTROL_1 :: ICBUF_CURRENT_CTRL [13:12] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_ICBUF_CURRENT_CTRL_MASK        0x00003000
#define BCHP_CLK_THIRD_OT_CONTROL_1_ICBUF_CURRENT_CTRL_SHIFT       12
#define BCHP_CLK_THIRD_OT_CONTROL_1_ICBUF_CURRENT_CTRL_ONE_HUNDRED_FIFTY_MICRO_AMP 0
#define BCHP_CLK_THIRD_OT_CONTROL_1_ICBUF_CURRENT_CTRL_TWO_HUNDRED_MICRO_AMP 1
#define BCHP_CLK_THIRD_OT_CONTROL_1_ICBUF_CURRENT_CTRL_TWO_HUNDRED_FIFTY_MICRO_AMP 2
#define BCHP_CLK_THIRD_OT_CONTROL_1_ICBUF_CURRENT_CTRL_THREE_HUNDRED_MICRO_AMP 3

/* CLK :: THIRD_OT_CONTROL_1 :: FREQ_DUBLER_CURRENT_CTRL [11:11] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_FREQ_DUBLER_CURRENT_CTRL_MASK  0x00000800
#define BCHP_CLK_THIRD_OT_CONTROL_1_FREQ_DUBLER_CURRENT_CTRL_SHIFT 11
#define BCHP_CLK_THIRD_OT_CONTROL_1_FREQ_DUBLER_CURRENT_CTRL_TWO_HUNDRED_MICRO_AMP 0
#define BCHP_CLK_THIRD_OT_CONTROL_1_FREQ_DUBLER_CURRENT_CTRL_THREE_HUNDRED_MICRO_AMP 1

/* CLK :: THIRD_OT_CONTROL_1 :: AMPLITUDE_LIMITER_ACTIVE [10:10] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_AMPLITUDE_LIMITER_ACTIVE_MASK  0x00000400
#define BCHP_CLK_THIRD_OT_CONTROL_1_AMPLITUDE_LIMITER_ACTIVE_SHIFT 10

/* CLK :: THIRD_OT_CONTROL_1 :: COMMON_MODE_VOLT_CTRL [09:08] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_COMMON_MODE_VOLT_CTRL_MASK     0x00000300
#define BCHP_CLK_THIRD_OT_CONTROL_1_COMMON_MODE_VOLT_CTRL_SHIFT    8
#define BCHP_CLK_THIRD_OT_CONTROL_1_COMMON_MODE_VOLT_CTRL_ONE_POINT_FOUR_FIVE_VOLT 1
#define BCHP_CLK_THIRD_OT_CONTROL_1_COMMON_MODE_VOLT_CTRL_ONE_POINT_FIVE_FOUR_VOLT 0
#define BCHP_CLK_THIRD_OT_CONTROL_1_COMMON_MODE_VOLT_CTRL_ONE_POINT_SIX_TWO_VOLT 2
#define BCHP_CLK_THIRD_OT_CONTROL_1_COMMON_MODE_VOLT_CTRL_ONE_POINT_SIX_SIX_VOLT 3

/* CLK :: THIRD_OT_CONTROL_1 :: FREQ_DOUBLER_BYPASS_EN [07:07] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_FREQ_DOUBLER_BYPASS_EN_MASK    0x00000080
#define BCHP_CLK_THIRD_OT_CONTROL_1_FREQ_DOUBLER_BYPASS_EN_SHIFT   7

/* CLK :: THIRD_OT_CONTROL_1 :: CML_6_N_P_EN [06:06] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_CML_6_N_P_EN_MASK              0x00000040
#define BCHP_CLK_THIRD_OT_CONTROL_1_CML_6_N_P_EN_SHIFT             6

/* CLK :: THIRD_OT_CONTROL_1 :: CML_5_N_P_EN [05:05] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_CML_5_N_P_EN_MASK              0x00000020
#define BCHP_CLK_THIRD_OT_CONTROL_1_CML_5_N_P_EN_SHIFT             5

/* CLK :: THIRD_OT_CONTROL_1 :: CML_4_N_P_EN [04:04] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_CML_4_N_P_EN_MASK              0x00000010
#define BCHP_CLK_THIRD_OT_CONTROL_1_CML_4_N_P_EN_SHIFT             4

/* CLK :: THIRD_OT_CONTROL_1 :: CML_3_N_P_EN [03:03] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_CML_3_N_P_EN_MASK              0x00000008
#define BCHP_CLK_THIRD_OT_CONTROL_1_CML_3_N_P_EN_SHIFT             3

/* CLK :: THIRD_OT_CONTROL_1 :: CML_2_N_P_EN [02:02] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_CML_2_N_P_EN_MASK              0x00000004
#define BCHP_CLK_THIRD_OT_CONTROL_1_CML_2_N_P_EN_SHIFT             2

/* CLK :: THIRD_OT_CONTROL_1 :: FREQ_MONITOR_OUTPUT_EN [01:01] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_FREQ_MONITOR_OUTPUT_EN_MASK    0x00000002
#define BCHP_CLK_THIRD_OT_CONTROL_1_FREQ_MONITOR_OUTPUT_EN_SHIFT   1

/* CLK :: THIRD_OT_CONTROL_1 :: FREQ_DOUBLER_POWER_DOWN [00:00] */
#define BCHP_CLK_THIRD_OT_CONTROL_1_FREQ_DOUBLER_POWER_DOWN_MASK   0x00000001
#define BCHP_CLK_THIRD_OT_CONTROL_1_FREQ_DOUBLER_POWER_DOWN_SHIFT  0

/***************************************************************************
 *PLL_LOCK_STATUS - current lock status of main PLL
 ***************************************************************************/
/* CLK :: PLL_LOCK_STATUS :: reserved0 [31:03] */
#define BCHP_CLK_PLL_LOCK_STATUS_reserved0_MASK                    0xfffffff8
#define BCHP_CLK_PLL_LOCK_STATUS_reserved0_SHIFT                   3

/* CLK :: PLL_LOCK_STATUS :: MIPS_PLL_LOCK [02:02] */
#define BCHP_CLK_PLL_LOCK_STATUS_MIPS_PLL_LOCK_MASK                0x00000004
#define BCHP_CLK_PLL_LOCK_STATUS_MIPS_PLL_LOCK_SHIFT               2

/* CLK :: PLL_LOCK_STATUS :: SYSTEM_PLL_0_LOCK [01:01] */
#define BCHP_CLK_PLL_LOCK_STATUS_SYSTEM_PLL_0_LOCK_MASK            0x00000002
#define BCHP_CLK_PLL_LOCK_STATUS_SYSTEM_PLL_0_LOCK_SHIFT           1

/* CLK :: PLL_LOCK_STATUS :: SYSTEM_PLL_1_LOCK [00:00] */
#define BCHP_CLK_PLL_LOCK_STATUS_SYSTEM_PLL_1_LOCK_MASK            0x00000001
#define BCHP_CLK_PLL_LOCK_STATUS_SYSTEM_PLL_1_LOCK_SHIFT           0

/***************************************************************************
 *SYS_PLL_1_CTLBUS_HI - SYS 1 PLL control bus higher word
 ***************************************************************************/
/* CLK :: SYS_PLL_1_CTLBUS_HI :: reserved0 [31:06] */
#define BCHP_CLK_SYS_PLL_1_CTLBUS_HI_reserved0_MASK                0xffffffc0
#define BCHP_CLK_SYS_PLL_1_CTLBUS_HI_reserved0_SHIFT               6

/* CLK :: SYS_PLL_1_CTLBUS_HI :: CTL_BITS_37_32 [05:00] */
#define BCHP_CLK_SYS_PLL_1_CTLBUS_HI_CTL_BITS_37_32_MASK           0x0000003f
#define BCHP_CLK_SYS_PLL_1_CTLBUS_HI_CTL_BITS_37_32_SHIFT          0

/***************************************************************************
 *SYS_PLL_1_CTLBUS_LO - SYS 1 PLL control bus lower word
 ***************************************************************************/
/* CLK :: SYS_PLL_1_CTLBUS_LO :: CTL_BITS_31_0 [31:00] */
#define BCHP_CLK_SYS_PLL_1_CTLBUS_LO_CTL_BITS_31_0_MASK            0xffffffff
#define BCHP_CLK_SYS_PLL_1_CTLBUS_LO_CTL_BITS_31_0_SHIFT           0

/***************************************************************************
 *SYS_PLL_1_CLOCK_ENA - SYS PLL 1 clock outputs enable
 ***************************************************************************/
/* CLK :: SYS_PLL_1_CLOCK_ENA :: reserved0 [31:01] */
#define BCHP_CLK_SYS_PLL_1_CLOCK_ENA_reserved0_MASK                0xfffffffe
#define BCHP_CLK_SYS_PLL_1_CLOCK_ENA_reserved0_SHIFT               1

/* CLK :: SYS_PLL_1_CLOCK_ENA :: CLOCK_ENA [00:00] */
#define BCHP_CLK_SYS_PLL_1_CLOCK_ENA_CLOCK_ENA_MASK                0x00000001
#define BCHP_CLK_SYS_PLL_1_CLOCK_ENA_CLOCK_ENA_SHIFT               0
#define BCHP_CLK_SYS_PLL_1_CLOCK_ENA_CLOCK_ENA_Enable              1
#define BCHP_CLK_SYS_PLL_1_CLOCK_ENA_CLOCK_ENA_Disable             0

/***************************************************************************
 *SYS_PLL_1_1 - SYS_PLL_1 channel 1: 50 MHz SPI clock,  PLL source post divider powerdown
 ***************************************************************************/
/* CLK :: SYS_PLL_1_1 :: reserved0 [31:01] */
#define BCHP_CLK_SYS_PLL_1_1_reserved0_MASK                        0xfffffffe
#define BCHP_CLK_SYS_PLL_1_1_reserved0_SHIFT                       1

/* CLK :: SYS_PLL_1_1 :: DIS_CH [00:00] */
#define BCHP_CLK_SYS_PLL_1_1_DIS_CH_MASK                           0x00000001
#define BCHP_CLK_SYS_PLL_1_1_DIS_CH_SHIFT                          0

/***************************************************************************
 *SYS_PLL_1_3 - SYS_PLL_1 channel 3: AVD clock,  PLL source post divider powerdown and cml buffer enable
 ***************************************************************************/
/* CLK :: SYS_PLL_1_3 :: reserved0 [31:02] */
#define BCHP_CLK_SYS_PLL_1_3_reserved0_MASK                        0xfffffffc
#define BCHP_CLK_SYS_PLL_1_3_reserved0_SHIFT                       2

/* CLK :: SYS_PLL_1_3 :: DIS_CH [01:01] */
#define BCHP_CLK_SYS_PLL_1_3_DIS_CH_MASK                           0x00000002
#define BCHP_CLK_SYS_PLL_1_3_DIS_CH_SHIFT                          1

/* CLK :: SYS_PLL_1_3 :: EN_CMLBUF [00:00] */
#define BCHP_CLK_SYS_PLL_1_3_EN_CMLBUF_MASK                        0x00000001
#define BCHP_CLK_SYS_PLL_1_3_EN_CMLBUF_SHIFT                       0

/***************************************************************************
 *SYS_PLL_1_4 - SYS_PLL_1 channel 4: 25 MHz ENET clock,  PLL source post divider powerdown
 ***************************************************************************/
/* CLK :: SYS_PLL_1_4 :: reserved0 [31:01] */
#define BCHP_CLK_SYS_PLL_1_4_reserved0_MASK                        0xfffffffe
#define BCHP_CLK_SYS_PLL_1_4_reserved0_SHIFT                       1

/* CLK :: SYS_PLL_1_4 :: DIS_CH [00:00] */
#define BCHP_CLK_SYS_PLL_1_4_DIS_CH_MASK                           0x00000001
#define BCHP_CLK_SYS_PLL_1_4_DIS_CH_SHIFT                          0

/***************************************************************************
 *SYS_PLL_1_5 - SYS_PLL_1 channel 5: RAP clock,  PLL source post divider powerdown and cml buffer enable
 ***************************************************************************/
/* CLK :: SYS_PLL_1_5 :: reserved0 [31:02] */
#define BCHP_CLK_SYS_PLL_1_5_reserved0_MASK                        0xfffffffc
#define BCHP_CLK_SYS_PLL_1_5_reserved0_SHIFT                       2

/* CLK :: SYS_PLL_1_5 :: DIS_CH [01:01] */
#define BCHP_CLK_SYS_PLL_1_5_DIS_CH_MASK                           0x00000002
#define BCHP_CLK_SYS_PLL_1_5_DIS_CH_SHIFT                          1

/* CLK :: SYS_PLL_1_5 :: EN_CMLBUF [00:00] */
#define BCHP_CLK_SYS_PLL_1_5_EN_CMLBUF_MASK                        0x00000001
#define BCHP_CLK_SYS_PLL_1_5_EN_CMLBUF_SHIFT                       0

/***************************************************************************
 *SYS_PLL_1_6 - SYS_PLL_1 channel 6: DVP_HT clock,  PLL source post divider powerdown and cml buffer enable
 ***************************************************************************/
/* CLK :: SYS_PLL_1_6 :: reserved0 [31:02] */
#define BCHP_CLK_SYS_PLL_1_6_reserved0_MASK                        0xfffffffc
#define BCHP_CLK_SYS_PLL_1_6_reserved0_SHIFT                       2

/* CLK :: SYS_PLL_1_6 :: DIS_CH [01:01] */
#define BCHP_CLK_SYS_PLL_1_6_DIS_CH_MASK                           0x00000002
#define BCHP_CLK_SYS_PLL_1_6_DIS_CH_SHIFT                          1

/* CLK :: SYS_PLL_1_6 :: EN_CMLBUF [00:00] */
#define BCHP_CLK_SYS_PLL_1_6_EN_CMLBUF_MASK                        0x00000001
#define BCHP_CLK_SYS_PLL_1_6_EN_CMLBUF_SHIFT                       0

/***************************************************************************
 *SYS_PLL_0_2 - SYS_PLL_0 channel 2: 81/40.5/20.25 MHz clocks to core_xpt and audio PLL reference clocks , PLL source post divider powerdown
 ***************************************************************************/
/* CLK :: SYS_PLL_0_2 :: reserved0 [31:01] */
#define BCHP_CLK_SYS_PLL_0_2_reserved0_MASK                        0xfffffffe
#define BCHP_CLK_SYS_PLL_0_2_reserved0_SHIFT                       1

/* CLK :: SYS_PLL_0_2 :: DIS_CH [00:00] */
#define BCHP_CLK_SYS_PLL_0_2_DIS_CH_MASK                           0x00000001
#define BCHP_CLK_SYS_PLL_0_2_DIS_CH_SHIFT                          0

/***************************************************************************
 *SYS_PLL_0_3 - SYS_PLL_0 channel 3: 48 MHz USB PLL reference and SDIO clocks, PLL source post divider powerdown and cml buffer enable
 ***************************************************************************/
/* CLK :: SYS_PLL_0_3 :: reserved0 [31:02] */
#define BCHP_CLK_SYS_PLL_0_3_reserved0_MASK                        0xfffffffc
#define BCHP_CLK_SYS_PLL_0_3_reserved0_SHIFT                       2

/* CLK :: SYS_PLL_0_3 :: DIS_CH [01:01] */
#define BCHP_CLK_SYS_PLL_0_3_DIS_CH_MASK                           0x00000002
#define BCHP_CLK_SYS_PLL_0_3_DIS_CH_SHIFT                          1

/* CLK :: SYS_PLL_0_3 :: EN_CMLBUF [00:00] */
#define BCHP_CLK_SYS_PLL_0_3_EN_CMLBUF_MASK                        0x00000001
#define BCHP_CLK_SYS_PLL_0_3_EN_CMLBUF_SHIFT                       0

/***************************************************************************
 *SYS_PLL_1_CTRL - SYS PLL 1 reset, output_delay
 ***************************************************************************/
/* CLK :: SYS_PLL_1_CTRL :: reserved0 [31:08] */
#define BCHP_CLK_SYS_PLL_1_CTRL_reserved0_MASK                     0xffffff00
#define BCHP_CLK_SYS_PLL_1_CTRL_reserved0_SHIFT                    8

/* CLK :: SYS_PLL_1_CTRL :: POWERDOWN [07:07] */
#define BCHP_CLK_SYS_PLL_1_CTRL_POWERDOWN_MASK                     0x00000080
#define BCHP_CLK_SYS_PLL_1_CTRL_POWERDOWN_SHIFT                    7
#define BCHP_CLK_SYS_PLL_1_CTRL_POWERDOWN_Powerdown                1
#define BCHP_CLK_SYS_PLL_1_CTRL_POWERDOWN_Normal                   0

/* CLK :: SYS_PLL_1_CTRL :: reserved_for_eco1 [06:02] */
#define BCHP_CLK_SYS_PLL_1_CTRL_reserved_for_eco1_MASK             0x0000007c
#define BCHP_CLK_SYS_PLL_1_CTRL_reserved_for_eco1_SHIFT            2

/* CLK :: SYS_PLL_1_CTRL :: DRESET [01:01] */
#define BCHP_CLK_SYS_PLL_1_CTRL_DRESET_MASK                        0x00000002
#define BCHP_CLK_SYS_PLL_1_CTRL_DRESET_SHIFT                       1
#define BCHP_CLK_SYS_PLL_1_CTRL_DRESET_Reset                       1
#define BCHP_CLK_SYS_PLL_1_CTRL_DRESET_Normal                      0

/* CLK :: SYS_PLL_1_CTRL :: ARESET [00:00] */
#define BCHP_CLK_SYS_PLL_1_CTRL_ARESET_MASK                        0x00000001
#define BCHP_CLK_SYS_PLL_1_CTRL_ARESET_SHIFT                       0
#define BCHP_CLK_SYS_PLL_1_CTRL_ARESET_Reset                       1
#define BCHP_CLK_SYS_PLL_1_CTRL_ARESET_Normal                      0

/***************************************************************************
 *SYS_PLL_0_CTRL - SYS PLL 0 reset, output_delay
 ***************************************************************************/
/* CLK :: SYS_PLL_0_CTRL :: RST_STATUS [31:31] */
#define BCHP_CLK_SYS_PLL_0_CTRL_RST_STATUS_MASK                    0x80000000
#define BCHP_CLK_SYS_PLL_0_CTRL_RST_STATUS_SHIFT                   31

/* CLK :: SYS_PLL_0_CTRL :: reserved0 [30:12] */
#define BCHP_CLK_SYS_PLL_0_CTRL_reserved0_MASK                     0x7ffff000
#define BCHP_CLK_SYS_PLL_0_CTRL_reserved0_SHIFT                    12

/* CLK :: SYS_PLL_0_CTRL :: SYS_PLL_0_DLY_CH6 [11:10] */
#define BCHP_CLK_SYS_PLL_0_CTRL_SYS_PLL_0_DLY_CH6_MASK             0x00000c00
#define BCHP_CLK_SYS_PLL_0_CTRL_SYS_PLL_0_DLY_CH6_SHIFT            10

/* CLK :: SYS_PLL_0_CTRL :: SYS_PLL_0_DLY_CH5 [09:08] */
#define BCHP_CLK_SYS_PLL_0_CTRL_SYS_PLL_0_DLY_CH5_MASK             0x00000300
#define BCHP_CLK_SYS_PLL_0_CTRL_SYS_PLL_0_DLY_CH5_SHIFT            8

/* CLK :: SYS_PLL_0_CTRL :: SYS_PLL_0_DLY_CH4 [07:06] */
#define BCHP_CLK_SYS_PLL_0_CTRL_SYS_PLL_0_DLY_CH4_MASK             0x000000c0
#define BCHP_CLK_SYS_PLL_0_CTRL_SYS_PLL_0_DLY_CH4_SHIFT            6

/* CLK :: SYS_PLL_0_CTRL :: SYS_PLL_0_DLY_CH3 [05:04] */
#define BCHP_CLK_SYS_PLL_0_CTRL_SYS_PLL_0_DLY_CH3_MASK             0x00000030
#define BCHP_CLK_SYS_PLL_0_CTRL_SYS_PLL_0_DLY_CH3_SHIFT            4

/* CLK :: SYS_PLL_0_CTRL :: SYS_PLL_0_DLY_CH2 [03:02] */
#define BCHP_CLK_SYS_PLL_0_CTRL_SYS_PLL_0_DLY_CH2_MASK             0x0000000c
#define BCHP_CLK_SYS_PLL_0_CTRL_SYS_PLL_0_DLY_CH2_SHIFT            2

/* CLK :: SYS_PLL_0_CTRL :: SYS_PLL_0_DLY_CH1 [01:00] */
#define BCHP_CLK_SYS_PLL_0_CTRL_SYS_PLL_0_DLY_CH1_MASK             0x00000003
#define BCHP_CLK_SYS_PLL_0_CTRL_SYS_PLL_0_DLY_CH1_SHIFT            0

/***************************************************************************
 *MIPS_PLL_CTRL - MIPS PLL reset, ch_disable, cpu frequency select, output_delay and powerdown
 ***************************************************************************/
/* CLK :: MIPS_PLL_CTRL :: RST_STATUS [31:31] */
#define BCHP_CLK_MIPS_PLL_CTRL_RST_STATUS_MASK                     0x80000000
#define BCHP_CLK_MIPS_PLL_CTRL_RST_STATUS_SHIFT                    31

/* CLK :: MIPS_PLL_CTRL :: BYPASS_PLL_RQ [30:30] */
#define BCHP_CLK_MIPS_PLL_CTRL_BYPASS_PLL_RQ_MASK                  0x40000000
#define BCHP_CLK_MIPS_PLL_CTRL_BYPASS_PLL_RQ_SHIFT                 30

/* CLK :: MIPS_PLL_CTRL :: BYPASS_PLL_STATE [29:29] */
#define BCHP_CLK_MIPS_PLL_CTRL_BYPASS_PLL_STATE_MASK               0x20000000
#define BCHP_CLK_MIPS_PLL_CTRL_BYPASS_PLL_STATE_SHIFT              29
#define BCHP_CLK_MIPS_PLL_CTRL_BYPASS_PLL_STATE_normal_PLL_mode    0
#define BCHP_CLK_MIPS_PLL_CTRL_BYPASS_PLL_STATE_bypassed_PLL_mode  1

/* union - case normal_PLL_mode [28:22] */
/* CLK :: MIPS_PLL_CTRL :: normal_PLL_mode :: A_RST_PLL [28:28] */
#define BCHP_CLK_MIPS_PLL_CTRL_normal_PLL_mode_A_RST_PLL_MASK      0x10000000
#define BCHP_CLK_MIPS_PLL_CTRL_normal_PLL_mode_A_RST_PLL_SHIFT     28

/* CLK :: MIPS_PLL_CTRL :: normal_PLL_mode :: D_RST_PLL [27:27] */
#define BCHP_CLK_MIPS_PLL_CTRL_normal_PLL_mode_D_RST_PLL_MASK      0x08000000
#define BCHP_CLK_MIPS_PLL_CTRL_normal_PLL_mode_D_RST_PLL_SHIFT     27

/* CLK :: MIPS_PLL_CTRL :: normal_PLL_mode :: CPU_FREQ [26:23] */
#define BCHP_CLK_MIPS_PLL_CTRL_normal_PLL_mode_CPU_FREQ_MASK       0x07800000
#define BCHP_CLK_MIPS_PLL_CTRL_normal_PLL_mode_CPU_FREQ_SHIFT      23

/* CLK :: MIPS_PLL_CTRL :: normal_PLL_mode :: OVERRIDE_CPU_FREQ_PIN_STRAP [22:22] */
#define BCHP_CLK_MIPS_PLL_CTRL_normal_PLL_mode_OVERRIDE_CPU_FREQ_PIN_STRAP_MASK 0x00400000
#define BCHP_CLK_MIPS_PLL_CTRL_normal_PLL_mode_OVERRIDE_CPU_FREQ_PIN_STRAP_SHIFT 22

/* union - case bypassed_PLL_mode [28:22] */
/* CLK :: MIPS_PLL_CTRL :: bypassed_PLL_mode :: A_RST_PLL [28:28] */
#define BCHP_CLK_MIPS_PLL_CTRL_bypassed_PLL_mode_A_RST_PLL_MASK    0x10000000
#define BCHP_CLK_MIPS_PLL_CTRL_bypassed_PLL_mode_A_RST_PLL_SHIFT   28

/* CLK :: MIPS_PLL_CTRL :: bypassed_PLL_mode :: D_RST_PLL [27:27] */
#define BCHP_CLK_MIPS_PLL_CTRL_bypassed_PLL_mode_D_RST_PLL_MASK    0x08000000
#define BCHP_CLK_MIPS_PLL_CTRL_bypassed_PLL_mode_D_RST_PLL_SHIFT   27

/* CLK :: MIPS_PLL_CTRL :: bypassed_PLL_mode :: CPU_FREQ [26:23] */
#define BCHP_CLK_MIPS_PLL_CTRL_bypassed_PLL_mode_CPU_FREQ_MASK     0x07800000
#define BCHP_CLK_MIPS_PLL_CTRL_bypassed_PLL_mode_CPU_FREQ_SHIFT    23

/* CLK :: MIPS_PLL_CTRL :: bypassed_PLL_mode :: OVERRIDE_CPU_FREQ_PIN_STRAP [22:22] */
#define BCHP_CLK_MIPS_PLL_CTRL_bypassed_PLL_mode_OVERRIDE_CPU_FREQ_PIN_STRAP_MASK 0x00400000
#define BCHP_CLK_MIPS_PLL_CTRL_bypassed_PLL_mode_OVERRIDE_CPU_FREQ_PIN_STRAP_SHIFT 22

/* CLK :: MIPS_PLL_CTRL :: reserved0 [21:19] */
#define BCHP_CLK_MIPS_PLL_CTRL_reserved0_MASK                      0x00380000
#define BCHP_CLK_MIPS_PLL_CTRL_reserved0_SHIFT                     19

/* CLK :: MIPS_PLL_CTRL :: DIS_MIPS_PLL_CH1 [18:18] */
#define BCHP_CLK_MIPS_PLL_CTRL_DIS_MIPS_PLL_CH1_MASK               0x00040000
#define BCHP_CLK_MIPS_PLL_CTRL_DIS_MIPS_PLL_CH1_SHIFT              18

/* CLK :: MIPS_PLL_CTRL :: MIPS_DLY_CH3 [17:16] */
#define BCHP_CLK_MIPS_PLL_CTRL_MIPS_DLY_CH3_MASK                   0x00030000
#define BCHP_CLK_MIPS_PLL_CTRL_MIPS_DLY_CH3_SHIFT                  16

/* CLK :: MIPS_PLL_CTRL :: MIPS_DLY_CH2 [15:14] */
#define BCHP_CLK_MIPS_PLL_CTRL_MIPS_DLY_CH2_MASK                   0x0000c000
#define BCHP_CLK_MIPS_PLL_CTRL_MIPS_DLY_CH2_SHIFT                  14

/* CLK :: MIPS_PLL_CTRL :: MIPS_DLY_CH1 [13:12] */
#define BCHP_CLK_MIPS_PLL_CTRL_MIPS_DLY_CH1_MASK                   0x00003000
#define BCHP_CLK_MIPS_PLL_CTRL_MIPS_DLY_CH1_SHIFT                  12

/* CLK :: MIPS_PLL_CTRL :: reserved1 [11:00] */
#define BCHP_CLK_MIPS_PLL_CTRL_reserved1_MASK                      0x00000fff
#define BCHP_CLK_MIPS_PLL_CTRL_reserved1_SHIFT                     0

/***************************************************************************
 *SPI_50_DIV - SYS PLL 1 SPI 50 MHz clock divider settings
 ***************************************************************************/
/* CLK :: SPI_50_DIV :: reserved0 [31:08] */
#define BCHP_CLK_SPI_50_DIV_reserved0_MASK                         0xffffff00
#define BCHP_CLK_SPI_50_DIV_reserved0_SHIFT                        8

/* CLK :: SPI_50_DIV :: M1DIV [07:00] */
#define BCHP_CLK_SPI_50_DIV_M1DIV_MASK                             0x000000ff
#define BCHP_CLK_SPI_50_DIV_M1DIV_SHIFT                            0

/***************************************************************************
 *DVP_HT_DIV - SYS PLL 1 DVP_HT clock divider settings
 ***************************************************************************/
/* CLK :: DVP_HT_DIV :: reserved0 [31:08] */
#define BCHP_CLK_DVP_HT_DIV_reserved0_MASK                         0xffffff00
#define BCHP_CLK_DVP_HT_DIV_reserved0_SHIFT                        8

/* CLK :: DVP_HT_DIV :: M6DIV [07:00] */
#define BCHP_CLK_DVP_HT_DIV_M6DIV_MASK                             0x000000ff
#define BCHP_CLK_DVP_HT_DIV_M6DIV_SHIFT                            0

/***************************************************************************
 *AVD_DIV - SYS PLL 1 AVD clock divider settings
 ***************************************************************************/
/* CLK :: AVD_DIV :: reserved0 [31:08] */
#define BCHP_CLK_AVD_DIV_reserved0_MASK                            0xffffff00
#define BCHP_CLK_AVD_DIV_reserved0_SHIFT                           8

/* CLK :: AVD_DIV :: M3DIV [07:00] */
#define BCHP_CLK_AVD_DIV_M3DIV_MASK                                0x000000ff
#define BCHP_CLK_AVD_DIV_M3DIV_SHIFT                               0

/***************************************************************************
 *RAP_DIV - SYS PLL RAP clock divider settings
 ***************************************************************************/
/* CLK :: RAP_DIV :: reserved0 [31:08] */
#define BCHP_CLK_RAP_DIV_reserved0_MASK                            0xffffff00
#define BCHP_CLK_RAP_DIV_reserved0_SHIFT                           8

/* CLK :: RAP_DIV :: M5DIV [07:00] */
#define BCHP_CLK_RAP_DIV_M5DIV_MASK                                0x000000ff
#define BCHP_CLK_RAP_DIV_M5DIV_SHIFT                               0

/***************************************************************************
 *D2CDIFF_AC_CTRL - AC_CTRL for D2CDIFF
 ***************************************************************************/
/* CLK :: D2CDIFF_AC_CTRL :: reserved_for_eco0 [31:22] */
#define B0_BCHP_CLK_D2CDIFF_AC_CTRL_reserved_for_eco0_MASK         0xffc00000
#define B0_BCHP_CLK_D2CDIFF_AC_CTRL_reserved_for_eco0_SHIFT        22

/* CLK :: D2CDIFF_AC_CTRL :: DVP_HT_MAX_STATUS [21:21] */
#define BCHP_CLK_D2CDIFF_AC_CTRL_DVP_HT_MAX_STATUS_MASK            0x00200000
#define BCHP_CLK_D2CDIFF_AC_CTRL_DVP_HT_MAX_STATUS_SHIFT           21

/* CLK :: D2CDIFF_AC_CTRL :: CML_RPT_0_STATUS [20:20] */
#define BCHP_CLK_D2CDIFF_AC_CTRL_CML_RPT_0_STATUS_MASK             0x00100000
#define BCHP_CLK_D2CDIFF_AC_CTRL_CML_RPT_0_STATUS_SHIFT            20

/* CLK :: D2CDIFF_AC_CTRL :: RPTD_STATUS [19:19] */
#define BCHP_CLK_D2CDIFF_AC_CTRL_RPTD_STATUS_MASK                  0x00080000
#define BCHP_CLK_D2CDIFF_AC_CTRL_RPTD_STATUS_SHIFT                 19

/* CLK :: D2CDIFF_AC_CTRL :: AVD_STATUS [18:18] */
#define BCHP_CLK_D2CDIFF_AC_CTRL_AVD_STATUS_MASK                   0x00040000
#define BCHP_CLK_D2CDIFF_AC_CTRL_AVD_STATUS_SHIFT                  18

/* CLK :: D2CDIFF_AC_CTRL :: MIPS_STATUS [17:17] */
#define BCHP_CLK_D2CDIFF_AC_CTRL_MIPS_STATUS_MASK                  0x00020000
#define BCHP_CLK_D2CDIFF_AC_CTRL_MIPS_STATUS_SHIFT                 17

/* CLK :: D2CDIFF_AC_CTRL :: MAIN_STATUS [16:16] */
#define BCHP_CLK_D2CDIFF_AC_CTRL_MAIN_STATUS_MASK                  0x00010000
#define BCHP_CLK_D2CDIFF_AC_CTRL_MAIN_STATUS_SHIFT                 16

/* CLK :: D2CDIFF_AC_CTRL :: reserved_for_eco0 [15:06] */
#define BCHP_CLK_D2CDIFF_AC_CTRL_reserved_for_eco0_MASK            0x0000ffc0
#define BCHP_CLK_D2CDIFF_AC_CTRL_reserved_for_eco0_SHIFT           6

/* CLK :: D2CDIFF_AC_CTRL :: DVP_HT_MAX_XOR [05:05] */
#define BCHP_CLK_D2CDIFF_AC_CTRL_DVP_HT_MAX_XOR_MASK               0x00000020
#define BCHP_CLK_D2CDIFF_AC_CTRL_DVP_HT_MAX_XOR_SHIFT              5

/* CLK :: D2CDIFF_AC_CTRL :: CML_RPT_0_XOR [04:04] */
#define BCHP_CLK_D2CDIFF_AC_CTRL_CML_RPT_0_XOR_MASK                0x00000010
#define BCHP_CLK_D2CDIFF_AC_CTRL_CML_RPT_0_XOR_SHIFT               4

/* CLK :: D2CDIFF_AC_CTRL :: RPTD_XOR [03:03] */
#define BCHP_CLK_D2CDIFF_AC_CTRL_RPTD_XOR_MASK                     0x00000008
#define BCHP_CLK_D2CDIFF_AC_CTRL_RPTD_XOR_SHIFT                    3

/* CLK :: D2CDIFF_AC_CTRL :: AVD_XOR [02:02] */
#define BCHP_CLK_D2CDIFF_AC_CTRL_AVD_XOR_MASK                      0x00000004
#define BCHP_CLK_D2CDIFF_AC_CTRL_AVD_XOR_SHIFT                     2

/* CLK :: D2CDIFF_AC_CTRL :: MIPS_XOR [01:01] */
#define BCHP_CLK_D2CDIFF_AC_CTRL_MIPS_XOR_MASK                     0x00000002
#define BCHP_CLK_D2CDIFF_AC_CTRL_MIPS_XOR_SHIFT                    1

/* CLK :: D2CDIFF_AC_CTRL :: MAIN_XOR [00:00] */
#define BCHP_CLK_D2CDIFF_AC_CTRL_MAIN_XOR_MASK                     0x00000001
#define BCHP_CLK_D2CDIFF_AC_CTRL_MAIN_XOR_SHIFT                    0

/***************************************************************************
 *VIEW_CLOCK_SELECT - View clock counter clock/lock_bit selection
 ***************************************************************************/
/* CLK :: VIEW_CLOCK_SELECT :: reserved0 [31:11] */
#define BCHP_CLK_VIEW_CLOCK_SELECT_reserved0_MASK                  0xfffff800
#define BCHP_CLK_VIEW_CLOCK_SELECT_reserved0_SHIFT                 11

/* CLK :: VIEW_CLOCK_SELECT :: ena_divide_by_8 [10:10] */
#define BCHP_CLK_VIEW_CLOCK_SELECT_ena_divide_by_8_MASK            0x00000400
#define BCHP_CLK_VIEW_CLOCK_SELECT_ena_divide_by_8_SHIFT           10

/* CLK :: VIEW_CLOCK_SELECT :: ena_divide_by_4 [09:09] */
#define BCHP_CLK_VIEW_CLOCK_SELECT_ena_divide_by_4_MASK            0x00000200
#define BCHP_CLK_VIEW_CLOCK_SELECT_ena_divide_by_4_SHIFT           9

/* CLK :: VIEW_CLOCK_SELECT :: ena_divide_by_2 [08:08] */
#define BCHP_CLK_VIEW_CLOCK_SELECT_ena_divide_by_2_MASK            0x00000100
#define BCHP_CLK_VIEW_CLOCK_SELECT_ena_divide_by_2_SHIFT           8

/* CLK :: VIEW_CLOCK_SELECT :: reserved1 [07:06] */
#define BCHP_CLK_VIEW_CLOCK_SELECT_reserved1_MASK                  0x000000c0
#define BCHP_CLK_VIEW_CLOCK_SELECT_reserved1_SHIFT                 6

/* CLK :: VIEW_CLOCK_SELECT :: view_clock_select [05:00] */
#define BCHP_CLK_VIEW_CLOCK_SELECT_view_clock_select_MASK          0x0000003f
#define BCHP_CLK_VIEW_CLOCK_SELECT_view_clock_select_SHIFT         0

/***************************************************************************
 *RING_OSC_ENABLE - Enable Ring Oscillators
 ***************************************************************************/
/* CLK :: RING_OSC_ENABLE :: reserved0 [31:14] */
#define BCHP_CLK_RING_OSC_ENABLE_reserved0_MASK                    0xffffc000
#define BCHP_CLK_RING_OSC_ENABLE_reserved0_SHIFT                   14

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_13 [13:13] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_13_MASK           0x00002000
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_13_SHIFT          13

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_12 [12:12] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_12_MASK           0x00001000
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_12_SHIFT          12

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_11 [11:11] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_11_MASK           0x00000800
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_11_SHIFT          11

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_10 [10:10] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_10_MASK           0x00000400
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_10_SHIFT          10

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_9 [09:09] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_9_MASK            0x00000200
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_9_SHIFT           9

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_8 [08:08] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_8_MASK            0x00000100
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_8_SHIFT           8

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_7 [07:07] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_7_MASK            0x00000080
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_7_SHIFT           7

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_6 [06:06] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_6_MASK            0x00000040
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_6_SHIFT           6

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_5 [05:05] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_5_MASK            0x00000020
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_5_SHIFT           5

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_4 [04:04] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_4_MASK            0x00000010
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_4_SHIFT           4

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_3 [03:03] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_3_MASK            0x00000008
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_3_SHIFT           3

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_2 [02:02] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_2_MASK            0x00000004
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_2_SHIFT           2

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_1 [01:01] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_1_MASK            0x00000002
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_1_SHIFT           1

/* CLK :: RING_OSC_ENABLE :: enable_ring_osc_0 [00:00] */
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_0_MASK            0x00000001
#define BCHP_CLK_RING_OSC_ENABLE_enable_ring_osc_0_SHIFT           0

/***************************************************************************
 *REF_CLOCK_COUNTER - Reference Clock Counter
 ***************************************************************************/
/* CLK :: REF_CLOCK_COUNTER :: reserved0 [31:20] */
#define BCHP_CLK_REF_CLOCK_COUNTER_reserved0_MASK                  0xfff00000
#define BCHP_CLK_REF_CLOCK_COUNTER_reserved0_SHIFT                 20

/* CLK :: REF_CLOCK_COUNTER :: ref_clock_cntr [19:00] */
#define BCHP_CLK_REF_CLOCK_COUNTER_ref_clock_cntr_MASK             0x000fffff
#define BCHP_CLK_REF_CLOCK_COUNTER_ref_clock_cntr_SHIFT            0

/***************************************************************************
 *VIEW_CLOCK_COUNTER - View Clock Counter
 ***************************************************************************/
/* CLK :: VIEW_CLOCK_COUNTER :: reserved0 [31:24] */
#define BCHP_CLK_VIEW_CLOCK_COUNTER_reserved0_MASK                 0xff000000
#define BCHP_CLK_VIEW_CLOCK_COUNTER_reserved0_SHIFT                24

/* CLK :: VIEW_CLOCK_COUNTER :: view_clock_cntr [23:00] */
#define BCHP_CLK_VIEW_CLOCK_COUNTER_view_clock_cntr_MASK           0x00ffffff
#define BCHP_CLK_VIEW_CLOCK_COUNTER_view_clock_cntr_SHIFT          0

/***************************************************************************
 *RESET_COUNTER - Reset counters
 ***************************************************************************/
/* CLK :: RESET_COUNTER :: reserved0 [31:02] */
#define BCHP_CLK_RESET_COUNTER_reserved0_MASK                      0xfffffffc
#define BCHP_CLK_RESET_COUNTER_reserved0_SHIFT                     2

/* CLK :: RESET_COUNTER :: reset_full_ref_count_done [01:01] */
#define BCHP_CLK_RESET_COUNTER_reset_full_ref_count_done_MASK      0x00000002
#define BCHP_CLK_RESET_COUNTER_reset_full_ref_count_done_SHIFT     1

/* CLK :: RESET_COUNTER :: reset_counter [00:00] */
#define BCHP_CLK_RESET_COUNTER_reset_counter_MASK                  0x00000001
#define BCHP_CLK_RESET_COUNTER_reset_counter_SHIFT                 0

/***************************************************************************
 *STOP_COUNTER - Stop counters
 ***************************************************************************/
/* CLK :: STOP_COUNTER :: reserved0 [31:03] */
#define BCHP_CLK_STOP_COUNTER_reserved0_MASK                       0xfffffff8
#define BCHP_CLK_STOP_COUNTER_reserved0_SHIFT                      3

/* CLK :: STOP_COUNTER :: launch_full_ref_count [02:02] */
#define BCHP_CLK_STOP_COUNTER_launch_full_ref_count_MASK           0x00000004
#define BCHP_CLK_STOP_COUNTER_launch_full_ref_count_SHIFT          2

/* CLK :: STOP_COUNTER :: stop_ref_clock_cntr [01:01] */
#define BCHP_CLK_STOP_COUNTER_stop_ref_clock_cntr_MASK             0x00000002
#define BCHP_CLK_STOP_COUNTER_stop_ref_clock_cntr_SHIFT            1

/* CLK :: STOP_COUNTER :: stop_view_clock_cntr [00:00] */
#define BCHP_CLK_STOP_COUNTER_stop_view_clock_cntr_MASK            0x00000001
#define BCHP_CLK_STOP_COUNTER_stop_view_clock_cntr_SHIFT           0

/***************************************************************************
 *IN_RANGE - View clock counter is in range
 ***************************************************************************/
/* CLK :: IN_RANGE :: reserved0 [31:02] */
#define BCHP_CLK_IN_RANGE_reserved0_MASK                           0xfffffffc
#define BCHP_CLK_IN_RANGE_reserved0_SHIFT                          2

/* CLK :: IN_RANGE :: full_ref_count_done [01:01] */
#define BCHP_CLK_IN_RANGE_full_ref_count_done_MASK                 0x00000002
#define BCHP_CLK_IN_RANGE_full_ref_count_done_SHIFT                1

/* CLK :: IN_RANGE :: in_range [00:00] */
#define BCHP_CLK_IN_RANGE_in_range_MASK                            0x00000001
#define BCHP_CLK_IN_RANGE_in_range_SHIFT                           0

/***************************************************************************
 *SWREG_VALUE - Hold SWREG related control values
 ***************************************************************************/
/* CLK :: SWREG_VALUE :: swreg_osc_freq [31:30] */
#define BCHP_CLK_SWREG_VALUE_swreg_osc_freq_MASK                   0xc0000000
#define BCHP_CLK_SWREG_VALUE_swreg_osc_freq_SHIFT                  30

/* CLK :: SWREG_VALUE :: swreg_novl_delay1p2 [29:26] */
#define BCHP_CLK_SWREG_VALUE_swreg_novl_delay1p2_MASK              0x3c000000
#define BCHP_CLK_SWREG_VALUE_swreg_novl_delay1p2_SHIFT             26

/* CLK :: SWREG_VALUE :: swreg_ovcur_prot [25:24] */
#define BCHP_CLK_SWREG_VALUE_swreg_ovcur_prot_MASK                 0x03000000
#define BCHP_CLK_SWREG_VALUE_swreg_ovcur_prot_SHIFT                24

/* CLK :: SWREG_VALUE :: swreg_ramp1p2 [23:21] */
#define BCHP_CLK_SWREG_VALUE_swreg_ramp1p2_MASK                    0x00e00000
#define BCHP_CLK_SWREG_VALUE_swreg_ramp1p2_SHIFT                   21

/* CLK :: SWREG_VALUE :: swreg_adj [20:17] */
#define BCHP_CLK_SWREG_VALUE_swreg_adj_MASK                        0x001e0000
#define BCHP_CLK_SWREG_VALUE_swreg_adj_SHIFT                       17

/* CLK :: SWREG_VALUE :: swreg_adj1p2 [16:13] */
#define BCHP_CLK_SWREG_VALUE_swreg_adj1p2_MASK                     0x0001e000
#define BCHP_CLK_SWREG_VALUE_swreg_adj1p2_SHIFT                    13

/* CLK :: SWREG_VALUE :: swreg_ldo_ctrl [12:11] */
#define BCHP_CLK_SWREG_VALUE_swreg_ldo_ctrl_MASK                   0x00001800
#define BCHP_CLK_SWREG_VALUE_swreg_ldo_ctrl_SHIFT                  11

/* CLK :: SWREG_VALUE :: reserved0 [10:06] */
#define BCHP_CLK_SWREG_VALUE_reserved0_MASK                        0x000007c0
#define BCHP_CLK_SWREG_VALUE_reserved0_SHIFT                       6

/* CLK :: SWREG_VALUE :: swreg_value_lock [05:05] */
#define BCHP_CLK_SWREG_VALUE_swreg_value_lock_MASK                 0x00000020
#define BCHP_CLK_SWREG_VALUE_swreg_value_lock_SHIFT                5

/* CLK :: SWREG_VALUE :: swreg_vselect [04:00] */
#define BCHP_CLK_SWREG_VALUE_swreg_vselect_MASK                    0x0000001f
#define BCHP_CLK_SWREG_VALUE_swreg_vselect_SHIFT                   0

/***************************************************************************
 *OTP_SWREG_VALUE - Hold SWREG related control values from OTP
 ***************************************************************************/
/* CLK :: OTP_SWREG_VALUE :: reserved0 [31:05] */
#define BCHP_CLK_OTP_SWREG_VALUE_reserved0_MASK                    0xffffffe0
#define BCHP_CLK_OTP_SWREG_VALUE_reserved0_SHIFT                   5

/* CLK :: OTP_SWREG_VALUE :: swreg_vselect [04:00] */
#define BCHP_CLK_OTP_SWREG_VALUE_swreg_vselect_MASK                0x0000001f
#define BCHP_CLK_OTP_SWREG_VALUE_swreg_vselect_SHIFT               0

/***************************************************************************
 *UVREG_VALUE - Hold UVREG related control values
 ***************************************************************************/
/* CLK :: UVREG_VALUE :: reserved0 [31:06] */
#define BCHP_CLK_UVREG_VALUE_reserved0_MASK                        0xffffffc0
#define BCHP_CLK_UVREG_VALUE_reserved0_SHIFT                       6

/* CLK :: UVREG_VALUE :: uvreg_value_lock [05:05] */
#define BCHP_CLK_UVREG_VALUE_uvreg_value_lock_MASK                 0x00000020
#define BCHP_CLK_UVREG_VALUE_uvreg_value_lock_SHIFT                5

/* CLK :: UVREG_VALUE :: uvreg_sel1pt2 [04:00] */
#define BCHP_CLK_UVREG_VALUE_uvreg_sel1pt2_MASK                    0x0000001f
#define BCHP_CLK_UVREG_VALUE_uvreg_sel1pt2_SHIFT                   0

/***************************************************************************
 *OTP_UVREG_VALUE - Hold UVREG related control values from OTP
 ***************************************************************************/
/* CLK :: OTP_UVREG_VALUE :: reserved0 [31:05] */
#define BCHP_CLK_OTP_UVREG_VALUE_reserved0_MASK                    0xffffffe0
#define BCHP_CLK_OTP_UVREG_VALUE_reserved0_SHIFT                   5

/* CLK :: OTP_UVREG_VALUE :: uvreg_sel1pt2 [04:00] */
#define BCHP_CLK_OTP_UVREG_VALUE_uvreg_sel1pt2_MASK                0x0000001f
#define BCHP_CLK_OTP_UVREG_VALUE_uvreg_sel1pt2_SHIFT               0

/***************************************************************************
 *RO_TEST_SUB_BLOCK_SEL - additional select/control values that can be used  for OSC pads
 ***************************************************************************/
/* CLK :: RO_TEST_SUB_BLOCK_SEL :: reserved0 [31:02] */
#define BCHP_CLK_RO_TEST_SUB_BLOCK_SEL_reserved0_MASK              0xfffffffc
#define BCHP_CLK_RO_TEST_SUB_BLOCK_SEL_reserved0_SHIFT             2

/* CLK :: RO_TEST_SUB_BLOCK_SEL :: ro_test_sub_block_select [01:00] */
#define BCHP_CLK_RO_TEST_SUB_BLOCK_SEL_ro_test_sub_block_select_MASK 0x00000003
#define BCHP_CLK_RO_TEST_SUB_BLOCK_SEL_ro_test_sub_block_select_SHIFT 0

/***************************************************************************
 *SCRATCH - clock_gen  Scratch register
 ***************************************************************************/
/* CLK :: SCRATCH :: VALUE [31:00] */
#define BCHP_CLK_SCRATCH_VALUE_MASK                                0xffffffff
#define BCHP_CLK_SCRATCH_VALUE_SHIFT                               0

#endif /* #ifndef BCHP_CLK_H__ */

/* End of File */