| /* |
| * Copyright (C) 2012 Texas Instruments Inc |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * Contributors: |
| * Manjunath Hadli <manjunath.hadli@ti.com> |
| * Prabhakar Lad <prabhakar.lad@ti.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| |
| #include <media/v4l2-ioctl.h> |
| |
| #include "vpfe.h" |
| #include "vpfe_mc_capture.h" |
| |
| static int debug; |
| |
| /* get v4l2 subdev pointer to external subdev which is active */ |
| static struct media_entity *vpfe_get_input_entity |
| (struct vpfe_video_device *video) |
| { |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct media_pad *remote; |
| |
| remote = media_entity_remote_pad(&vpfe_dev->vpfe_isif.pads[0]); |
| if (remote == NULL) { |
| pr_err("Invalid media connection to isif/ccdc\n"); |
| return NULL; |
| } |
| return remote->entity; |
| } |
| |
| /* updates external subdev(sensor/decoder) which is active */ |
| static int vpfe_update_current_ext_subdev(struct vpfe_video_device *video) |
| { |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct vpfe_config *vpfe_cfg; |
| struct v4l2_subdev *subdev; |
| struct media_pad *remote; |
| int i; |
| |
| remote = media_entity_remote_pad(&vpfe_dev->vpfe_isif.pads[0]); |
| if (remote == NULL) { |
| pr_err("Invalid media connection to isif/ccdc\n"); |
| return -EINVAL; |
| } |
| |
| subdev = media_entity_to_v4l2_subdev(remote->entity); |
| vpfe_cfg = vpfe_dev->pdev->platform_data; |
| for (i = 0; i < vpfe_cfg->num_subdevs; i++) { |
| if (!strcmp(vpfe_cfg->sub_devs[i].module_name, subdev->name)) { |
| video->current_ext_subdev = &vpfe_cfg->sub_devs[i]; |
| break; |
| } |
| } |
| |
| /* if user not linked decoder/sensor to isif/ccdc */ |
| if (i == vpfe_cfg->num_subdevs) { |
| pr_err("Invalid media chain connection to isif/ccdc\n"); |
| return -EINVAL; |
| } |
| /* find the v4l2 subdev pointer */ |
| for (i = 0; i < vpfe_dev->num_ext_subdevs; i++) { |
| if (!strcmp(video->current_ext_subdev->module_name, |
| vpfe_dev->sd[i]->name)) |
| video->current_ext_subdev->subdev = vpfe_dev->sd[i]; |
| } |
| return 0; |
| } |
| |
| /* get the subdev which is connected to the output video node */ |
| static struct v4l2_subdev * |
| vpfe_video_remote_subdev(struct vpfe_video_device *video, u32 *pad) |
| { |
| struct media_pad *remote = media_entity_remote_pad(&video->pad); |
| |
| if (remote == NULL || remote->entity->type != MEDIA_ENT_T_V4L2_SUBDEV) |
| return NULL; |
| if (pad) |
| *pad = remote->index; |
| return media_entity_to_v4l2_subdev(remote->entity); |
| } |
| |
| /* get the format set at output pad of the adjacent subdev */ |
| static int |
| __vpfe_video_get_format(struct vpfe_video_device *video, |
| struct v4l2_format *format) |
| { |
| struct v4l2_subdev_format fmt; |
| struct v4l2_subdev *subdev; |
| struct media_pad *remote; |
| u32 pad; |
| int ret; |
| |
| subdev = vpfe_video_remote_subdev(video, &pad); |
| if (subdev == NULL) |
| return -EINVAL; |
| |
| fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; |
| remote = media_entity_remote_pad(&video->pad); |
| fmt.pad = remote->index; |
| |
| ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt); |
| if (ret == -ENOIOCTLCMD) |
| return -EINVAL; |
| |
| format->type = video->type; |
| /* convert mbus_format to v4l2_format */ |
| v4l2_fill_pix_format(&format->fmt.pix, &fmt.format); |
| mbus_to_pix(&fmt.format, &format->fmt.pix); |
| |
| return 0; |
| } |
| |
| /* make a note of pipeline details */ |
| static void vpfe_prepare_pipeline(struct vpfe_video_device *video) |
| { |
| struct media_entity *entity = &video->video_dev.entity; |
| struct media_device *mdev = entity->parent; |
| struct vpfe_pipeline *pipe = &video->pipe; |
| struct vpfe_video_device *far_end = NULL; |
| struct media_entity_graph graph; |
| |
| pipe->input_num = 0; |
| pipe->output_num = 0; |
| |
| if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) |
| pipe->inputs[pipe->input_num++] = video; |
| else |
| pipe->outputs[pipe->output_num++] = video; |
| |
| mutex_lock(&mdev->graph_mutex); |
| media_entity_graph_walk_start(&graph, entity); |
| while ((entity = media_entity_graph_walk_next(&graph))) { |
| if (entity == &video->video_dev.entity) |
| continue; |
| if (media_entity_type(entity) != MEDIA_ENT_T_DEVNODE) |
| continue; |
| far_end = to_vpfe_video(media_entity_to_video_device(entity)); |
| if (far_end->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) |
| pipe->inputs[pipe->input_num++] = far_end; |
| else |
| pipe->outputs[pipe->output_num++] = far_end; |
| } |
| mutex_unlock(&mdev->graph_mutex); |
| } |
| |
| /* update pipe state selected by user */ |
| static int vpfe_update_pipe_state(struct vpfe_video_device *video) |
| { |
| struct vpfe_pipeline *pipe = &video->pipe; |
| int ret; |
| |
| vpfe_prepare_pipeline(video); |
| |
| /* Find out if there is any input video |
| if yes, it is single shot. |
| */ |
| if (pipe->input_num == 0) { |
| pipe->state = VPFE_PIPELINE_STREAM_CONTINUOUS; |
| ret = vpfe_update_current_ext_subdev(video); |
| if (ret) { |
| pr_err("Invalid external subdev\n"); |
| return ret; |
| } |
| } else { |
| pipe->state = VPFE_PIPELINE_STREAM_SINGLESHOT; |
| } |
| video->initialized = 1; |
| video->skip_frame_count = 1; |
| video->skip_frame_count_init = 1; |
| return 0; |
| } |
| |
| /* checks wether pipeline is ready for enabling */ |
| int vpfe_video_is_pipe_ready(struct vpfe_pipeline *pipe) |
| { |
| int i; |
| |
| for (i = 0; i < pipe->input_num; i++) |
| if (!pipe->inputs[i]->started || |
| pipe->inputs[i]->state != VPFE_VIDEO_BUFFER_QUEUED) |
| return 0; |
| for (i = 0; i < pipe->output_num; i++) |
| if (!pipe->outputs[i]->started || |
| pipe->outputs[i]->state != VPFE_VIDEO_BUFFER_QUEUED) |
| return 0; |
| return 1; |
| } |
| |
| /** |
| * Validate a pipeline by checking both ends of all links for format |
| * discrepancies. |
| * |
| * Return 0 if all formats match, or -EPIPE if at least one link is found with |
| * different formats on its two ends. |
| */ |
| static int vpfe_video_validate_pipeline(struct vpfe_pipeline *pipe) |
| { |
| struct v4l2_subdev_format fmt_source; |
| struct v4l2_subdev_format fmt_sink; |
| struct v4l2_subdev *subdev; |
| struct media_pad *pad; |
| int ret; |
| |
| /* |
| * Should not matter if it is output[0] or 1 as |
| * the general ideas is to traverse backwards and |
| * the fact that the out video node always has the |
| * format of the connected pad. |
| */ |
| subdev = vpfe_video_remote_subdev(pipe->outputs[0], NULL); |
| if (subdev == NULL) |
| return -EPIPE; |
| |
| while (1) { |
| /* Retrieve the sink format */ |
| pad = &subdev->entity.pads[0]; |
| if (!(pad->flags & MEDIA_PAD_FL_SINK)) |
| break; |
| |
| fmt_sink.which = V4L2_SUBDEV_FORMAT_ACTIVE; |
| fmt_sink.pad = pad->index; |
| ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, |
| &fmt_sink); |
| |
| if (ret < 0 && ret != -ENOIOCTLCMD) |
| return -EPIPE; |
| |
| /* Retrieve the source format */ |
| pad = media_entity_remote_pad(pad); |
| if (pad == NULL || |
| pad->entity->type != MEDIA_ENT_T_V4L2_SUBDEV) |
| break; |
| |
| subdev = media_entity_to_v4l2_subdev(pad->entity); |
| |
| fmt_source.which = V4L2_SUBDEV_FORMAT_ACTIVE; |
| fmt_source.pad = pad->index; |
| ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt_source); |
| if (ret < 0 && ret != -ENOIOCTLCMD) |
| return -EPIPE; |
| |
| /* Check if the two ends match */ |
| if (fmt_source.format.code != fmt_sink.format.code || |
| fmt_source.format.width != fmt_sink.format.width || |
| fmt_source.format.height != fmt_sink.format.height) |
| return -EPIPE; |
| } |
| return 0; |
| } |
| |
| /* |
| * vpfe_pipeline_enable() - Enable streaming on a pipeline |
| * @vpfe_dev: vpfe device |
| * @pipe: vpfe pipeline |
| * |
| * Walk the entities chain starting at the pipeline output video node and start |
| * all modules in the chain in the given mode. |
| * |
| * Return 0 if successful, or the return value of the failed video::s_stream |
| * operation otherwise. |
| */ |
| static int vpfe_pipeline_enable(struct vpfe_pipeline *pipe) |
| { |
| struct media_entity_graph graph; |
| struct media_entity *entity; |
| struct v4l2_subdev *subdev; |
| struct media_device *mdev; |
| int ret = 0; |
| |
| if (pipe->state == VPFE_PIPELINE_STREAM_CONTINUOUS) |
| entity = vpfe_get_input_entity(pipe->outputs[0]); |
| else |
| entity = &pipe->inputs[0]->video_dev.entity; |
| |
| mdev = entity->parent; |
| mutex_lock(&mdev->graph_mutex); |
| media_entity_graph_walk_start(&graph, entity); |
| while ((entity = media_entity_graph_walk_next(&graph))) { |
| |
| if (media_entity_type(entity) == MEDIA_ENT_T_DEVNODE) |
| continue; |
| subdev = media_entity_to_v4l2_subdev(entity); |
| ret = v4l2_subdev_call(subdev, video, s_stream, 1); |
| if (ret < 0 && ret != -ENOIOCTLCMD) |
| break; |
| } |
| mutex_unlock(&mdev->graph_mutex); |
| return ret; |
| } |
| |
| /* |
| * vpfe_pipeline_disable() - Disable streaming on a pipeline |
| * @vpfe_dev: vpfe device |
| * @pipe: VPFE pipeline |
| * |
| * Walk the entities chain starting at the pipeline output video node and stop |
| * all modules in the chain. |
| * |
| * Return 0 if all modules have been properly stopped, or -ETIMEDOUT if a module |
| * can't be stopped. |
| */ |
| static int vpfe_pipeline_disable(struct vpfe_pipeline *pipe) |
| { |
| struct media_entity_graph graph; |
| struct media_entity *entity; |
| struct v4l2_subdev *subdev; |
| struct media_device *mdev; |
| int ret = 0; |
| |
| if (pipe->state == VPFE_PIPELINE_STREAM_CONTINUOUS) |
| entity = vpfe_get_input_entity(pipe->outputs[0]); |
| else |
| entity = &pipe->inputs[0]->video_dev.entity; |
| |
| mdev = entity->parent; |
| mutex_lock(&mdev->graph_mutex); |
| media_entity_graph_walk_start(&graph, entity); |
| |
| while ((entity = media_entity_graph_walk_next(&graph))) { |
| |
| if (media_entity_type(entity) == MEDIA_ENT_T_DEVNODE) |
| continue; |
| subdev = media_entity_to_v4l2_subdev(entity); |
| ret = v4l2_subdev_call(subdev, video, s_stream, 0); |
| if (ret < 0 && ret != -ENOIOCTLCMD) |
| break; |
| } |
| mutex_unlock(&mdev->graph_mutex); |
| |
| return ret ? -ETIMEDOUT : 0; |
| } |
| |
| /* |
| * vpfe_pipeline_set_stream() - Enable/disable streaming on a pipeline |
| * @vpfe_dev: VPFE device |
| * @pipe: VPFE pipeline |
| * @state: Stream state (stopped or active) |
| * |
| * Set the pipeline to the given stream state. |
| * |
| * Return 0 if successful, or the return value of the failed video::s_stream |
| * operation otherwise. |
| */ |
| static int vpfe_pipeline_set_stream(struct vpfe_pipeline *pipe, |
| enum vpfe_pipeline_stream_state state) |
| { |
| if (state == VPFE_PIPELINE_STREAM_STOPPED) |
| return vpfe_pipeline_disable(pipe); |
| |
| return vpfe_pipeline_enable(pipe); |
| } |
| |
| static int all_videos_stopped(struct vpfe_video_device *video) |
| { |
| struct vpfe_pipeline *pipe = &video->pipe; |
| int i; |
| |
| for (i = 0; i < pipe->input_num; i++) |
| if (pipe->inputs[i]->started) |
| return 0; |
| for (i = 0; i < pipe->output_num; i++) |
| if (pipe->outputs[i]->started) |
| return 0; |
| return 1; |
| } |
| |
| /* |
| * vpfe_open() - open video device |
| * @file: file pointer |
| * |
| * initialize media pipeline state, allocate memory for file handle |
| * |
| * Return 0 if successful, or the return -ENODEV otherwise. |
| */ |
| static int vpfe_open(struct file *file) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_fh *handle; |
| |
| /* Allocate memory for the file handle object */ |
| handle = kzalloc(sizeof(struct vpfe_fh), GFP_KERNEL); |
| |
| if (handle == NULL) |
| return -ENOMEM; |
| |
| v4l2_fh_init(&handle->vfh, &video->video_dev); |
| v4l2_fh_add(&handle->vfh); |
| |
| mutex_lock(&video->lock); |
| /* If decoder is not initialized. initialize it */ |
| if (!video->initialized && vpfe_update_pipe_state(video)) { |
| mutex_unlock(&video->lock); |
| return -ENODEV; |
| } |
| /* Increment device users counter */ |
| video->usrs++; |
| /* Set io_allowed member to false */ |
| handle->io_allowed = 0; |
| handle->video = video; |
| file->private_data = &handle->vfh; |
| mutex_unlock(&video->lock); |
| |
| return 0; |
| } |
| |
| /* get the next buffer available from dma queue */ |
| static unsigned long |
| vpfe_video_get_next_buffer(struct vpfe_video_device *video) |
| { |
| video->cur_frm = video->next_frm = |
| list_entry(video->dma_queue.next, |
| struct vpfe_cap_buffer, list); |
| |
| list_del(&video->next_frm->list); |
| video->next_frm->vb.vb2_buf.state = VB2_BUF_STATE_ACTIVE; |
| return vb2_dma_contig_plane_dma_addr(&video->next_frm->vb.vb2_buf, 0); |
| } |
| |
| /* schedule the next buffer which is available on dma queue */ |
| void vpfe_video_schedule_next_buffer(struct vpfe_video_device *video) |
| { |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| unsigned long addr; |
| |
| if (list_empty(&video->dma_queue)) |
| return; |
| |
| video->next_frm = list_entry(video->dma_queue.next, |
| struct vpfe_cap_buffer, list); |
| |
| if (VPFE_PIPELINE_STREAM_SINGLESHOT == video->pipe.state) |
| video->cur_frm = video->next_frm; |
| |
| list_del(&video->next_frm->list); |
| video->next_frm->vb.vb2_buf.state = VB2_BUF_STATE_ACTIVE; |
| addr = vb2_dma_contig_plane_dma_addr(&video->next_frm->vb.vb2_buf, 0); |
| video->ops->queue(vpfe_dev, addr); |
| video->state = VPFE_VIDEO_BUFFER_QUEUED; |
| } |
| |
| /* schedule the buffer for capturing bottom field */ |
| void vpfe_video_schedule_bottom_field(struct vpfe_video_device *video) |
| { |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| unsigned long addr; |
| |
| addr = vb2_dma_contig_plane_dma_addr(&video->cur_frm->vb.vb2_buf, 0); |
| addr += video->field_off; |
| video->ops->queue(vpfe_dev, addr); |
| } |
| |
| /* make buffer available for dequeue */ |
| void vpfe_video_process_buffer_complete(struct vpfe_video_device *video) |
| { |
| struct vpfe_pipeline *pipe = &video->pipe; |
| |
| v4l2_get_timestamp(&video->cur_frm->vb.timestamp); |
| vb2_buffer_done(&video->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE); |
| if (pipe->state == VPFE_PIPELINE_STREAM_CONTINUOUS) |
| video->cur_frm = video->next_frm; |
| } |
| |
| /* vpfe_stop_capture() - stop streaming */ |
| static void vpfe_stop_capture(struct vpfe_video_device *video) |
| { |
| struct vpfe_pipeline *pipe = &video->pipe; |
| |
| video->started = 0; |
| |
| if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) |
| return; |
| if (all_videos_stopped(video)) |
| vpfe_pipeline_set_stream(pipe, |
| VPFE_PIPELINE_STREAM_STOPPED); |
| } |
| |
| /* |
| * vpfe_release() - release video device |
| * @file: file pointer |
| * |
| * deletes buffer queue, frees the buffers and the vpfe file handle |
| * |
| * Return 0 |
| */ |
| static int vpfe_release(struct file *file) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct v4l2_fh *vfh = file->private_data; |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct vpfe_fh *fh = container_of(vfh, struct vpfe_fh, vfh); |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n"); |
| |
| /* Get the device lock */ |
| mutex_lock(&video->lock); |
| /* if this instance is doing IO */ |
| if (fh->io_allowed) { |
| if (video->started) { |
| vpfe_stop_capture(video); |
| /* mark pipe state as stopped in vpfe_release(), |
| as app might call streamon() after streamoff() |
| in which case driver has to start streaming. |
| */ |
| video->pipe.state = VPFE_PIPELINE_STREAM_STOPPED; |
| vb2_streamoff(&video->buffer_queue, |
| video->buffer_queue.type); |
| } |
| video->io_usrs = 0; |
| /* Free buffers allocated */ |
| vb2_queue_release(&video->buffer_queue); |
| vb2_dma_contig_cleanup_ctx(video->alloc_ctx); |
| } |
| /* Decrement device users counter */ |
| video->usrs--; |
| v4l2_fh_del(&fh->vfh); |
| v4l2_fh_exit(&fh->vfh); |
| /* If this is the last file handle */ |
| if (!video->usrs) |
| video->initialized = 0; |
| mutex_unlock(&video->lock); |
| file->private_data = NULL; |
| /* Free memory allocated to file handle object */ |
| v4l2_fh_del(vfh); |
| kzfree(fh); |
| return 0; |
| } |
| |
| /* |
| * vpfe_mmap() - It is used to map kernel space buffers |
| * into user spaces |
| */ |
| static int vpfe_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n"); |
| return vb2_mmap(&video->buffer_queue, vma); |
| } |
| |
| /* |
| * vpfe_poll() - It is used for select/poll system call |
| */ |
| static unsigned int vpfe_poll(struct file *file, poll_table *wait) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n"); |
| if (video->started) |
| return vb2_poll(&video->buffer_queue, file, wait); |
| return 0; |
| } |
| |
| /* vpfe capture driver file operations */ |
| static const struct v4l2_file_operations vpfe_fops = { |
| .owner = THIS_MODULE, |
| .open = vpfe_open, |
| .release = vpfe_release, |
| .unlocked_ioctl = video_ioctl2, |
| .mmap = vpfe_mmap, |
| .poll = vpfe_poll |
| }; |
| |
| /* |
| * vpfe_querycap() - query capabilities of video device |
| * @file: file pointer |
| * @priv: void pointer |
| * @cap: pointer to v4l2_capability structure |
| * |
| * fills v4l2 capabilities structure |
| * |
| * Return 0 |
| */ |
| static int vpfe_querycap(struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n"); |
| |
| if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; |
| else |
| cap->device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; |
| cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | |
| V4L2_CAP_STREAMING | V4L2_CAP_DEVICE_CAPS; |
| strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); |
| strlcpy(cap->bus_info, "VPFE", sizeof(cap->bus_info)); |
| strlcpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card)); |
| |
| return 0; |
| } |
| |
| /* |
| * vpfe_g_fmt() - get the format which is active on video device |
| * @file: file pointer |
| * @priv: void pointer |
| * @fmt: pointer to v4l2_format structure |
| * |
| * fills v4l2 format structure with active format |
| * |
| * Return 0 |
| */ |
| static int vpfe_g_fmt(struct file *file, void *priv, |
| struct v4l2_format *fmt) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt\n"); |
| /* Fill in the information about format */ |
| *fmt = video->fmt; |
| return 0; |
| } |
| |
| /* |
| * vpfe_enum_fmt() - enum formats supported on media chain |
| * @file: file pointer |
| * @priv: void pointer |
| * @fmt: pointer to v4l2_fmtdesc structure |
| * |
| * fills v4l2_fmtdesc structure with output format set on adjacent subdev, |
| * only one format is enumearted as subdevs are already configured |
| * |
| * Return 0 if successful, error code otherwise |
| */ |
| static int vpfe_enum_fmt(struct file *file, void *priv, |
| struct v4l2_fmtdesc *fmt) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct v4l2_subdev_format sd_fmt; |
| struct v4l2_mbus_framefmt mbus; |
| struct v4l2_subdev *subdev; |
| struct v4l2_format format; |
| struct media_pad *remote; |
| int ret; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt\n"); |
| |
| /* since already subdev pad format is set, |
| only one pixel format is available */ |
| if (fmt->index > 0) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid index\n"); |
| return -EINVAL; |
| } |
| /* get the remote pad */ |
| remote = media_entity_remote_pad(&video->pad); |
| if (remote == NULL) { |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "invalid remote pad for video node\n"); |
| return -EINVAL; |
| } |
| /* get the remote subdev */ |
| subdev = vpfe_video_remote_subdev(video, NULL); |
| if (subdev == NULL) { |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "invalid remote subdev for video node\n"); |
| return -EINVAL; |
| } |
| sd_fmt.pad = remote->index; |
| sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; |
| /* get output format of remote subdev */ |
| ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &sd_fmt); |
| if (ret) { |
| v4l2_err(&vpfe_dev->v4l2_dev, |
| "invalid remote subdev for video node\n"); |
| return ret; |
| } |
| /* convert to pix format */ |
| mbus.code = sd_fmt.format.code; |
| mbus_to_pix(&mbus, &format.fmt.pix); |
| /* copy the result */ |
| fmt->pixelformat = format.fmt.pix.pixelformat; |
| |
| return 0; |
| } |
| |
| /* |
| * vpfe_s_fmt() - set the format on video device |
| * @file: file pointer |
| * @priv: void pointer |
| * @fmt: pointer to v4l2_format structure |
| * |
| * validate and set the format on video device |
| * |
| * Return 0 on success, error code otherwise |
| */ |
| static int vpfe_s_fmt(struct file *file, void *priv, |
| struct v4l2_format *fmt) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct v4l2_format format; |
| int ret; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt\n"); |
| /* If streaming is started, return error */ |
| if (video->started) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n"); |
| return -EBUSY; |
| } |
| /* get adjacent subdev's output pad format */ |
| ret = __vpfe_video_get_format(video, &format); |
| if (ret) |
| return ret; |
| *fmt = format; |
| video->fmt = *fmt; |
| return 0; |
| } |
| |
| /* |
| * vpfe_try_fmt() - try the format on video device |
| * @file: file pointer |
| * @priv: void pointer |
| * @fmt: pointer to v4l2_format structure |
| * |
| * validate the format, update with correct format |
| * based on output format set on adjacent subdev |
| * |
| * Return 0 on success, error code otherwise |
| */ |
| static int vpfe_try_fmt(struct file *file, void *priv, |
| struct v4l2_format *fmt) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct v4l2_format format; |
| int ret; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt\n"); |
| /* get adjacent subdev's output pad format */ |
| ret = __vpfe_video_get_format(video, &format); |
| if (ret) |
| return ret; |
| |
| *fmt = format; |
| return 0; |
| } |
| |
| /* |
| * vpfe_enum_input() - enum inputs supported on media chain |
| * @file: file pointer |
| * @priv: void pointer |
| * @fmt: pointer to v4l2_fmtdesc structure |
| * |
| * fills v4l2_input structure with input available on media chain, |
| * only one input is enumearted as media chain is setup by this time |
| * |
| * Return 0 if successful, -EINVAL is media chain is invalid |
| */ |
| static int vpfe_enum_input(struct file *file, void *priv, |
| struct v4l2_input *inp) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_ext_subdev_info *sdinfo = video->current_ext_subdev; |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n"); |
| /* enumerate from the subdev user has chosen through mc */ |
| if (inp->index < sdinfo->num_inputs) { |
| memcpy(inp, &sdinfo->inputs[inp->index], |
| sizeof(struct v4l2_input)); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| /* |
| * vpfe_g_input() - get index of the input which is active |
| * @file: file pointer |
| * @priv: void pointer |
| * @index: pointer to unsigned int |
| * |
| * set index with input index which is active |
| */ |
| static int vpfe_g_input(struct file *file, void *priv, unsigned int *index) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n"); |
| |
| *index = video->current_input; |
| return 0; |
| } |
| |
| /* |
| * vpfe_s_input() - set input which is pointed by input index |
| * @file: file pointer |
| * @priv: void pointer |
| * @index: pointer to unsigned int |
| * |
| * set input on external subdev |
| * |
| * Return 0 on success, error code otherwise |
| */ |
| static int vpfe_s_input(struct file *file, void *priv, unsigned int index) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct vpfe_ext_subdev_info *sdinfo; |
| struct vpfe_route *route; |
| struct v4l2_input *inps; |
| u32 output; |
| u32 input; |
| int ret; |
| int i; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n"); |
| |
| ret = mutex_lock_interruptible(&video->lock); |
| if (ret) |
| return ret; |
| /* |
| * If streaming is started return device busy |
| * error |
| */ |
| if (video->started) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n"); |
| ret = -EBUSY; |
| goto unlock_out; |
| } |
| |
| sdinfo = video->current_ext_subdev; |
| if (!sdinfo->registered) { |
| ret = -EINVAL; |
| goto unlock_out; |
| } |
| if (vpfe_dev->cfg->setup_input && |
| vpfe_dev->cfg->setup_input(sdinfo->grp_id) < 0) { |
| ret = -EFAULT; |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, |
| "couldn't setup input for %s\n", |
| sdinfo->module_name); |
| goto unlock_out; |
| } |
| route = &sdinfo->routes[index]; |
| if (route && sdinfo->can_route) { |
| input = route->input; |
| output = route->output; |
| ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, |
| sdinfo->grp_id, video, |
| s_routing, input, output, 0); |
| if (ret) { |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, |
| "s_input:error in setting input in decoder\n"); |
| ret = -EINVAL; |
| goto unlock_out; |
| } |
| } |
| /* set standards set by subdev in video device */ |
| for (i = 0; i < sdinfo->num_inputs; i++) { |
| inps = &sdinfo->inputs[i]; |
| video->video_dev.tvnorms |= inps->std; |
| } |
| video->current_input = index; |
| unlock_out: |
| mutex_unlock(&video->lock); |
| return ret; |
| } |
| |
| /* |
| * vpfe_querystd() - query std which is being input on external subdev |
| * @file: file pointer |
| * @priv: void pointer |
| * @std_id: pointer to v4l2_std_id structure |
| * |
| * call external subdev through v4l2_device_call_until_err to |
| * get the std that is being active. |
| * |
| * Return 0 on success, error code otherwise |
| */ |
| static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct vpfe_ext_subdev_info *sdinfo; |
| int ret; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n"); |
| |
| ret = mutex_lock_interruptible(&video->lock); |
| sdinfo = video->current_ext_subdev; |
| if (ret) |
| return ret; |
| /* Call querystd function of decoder device */ |
| ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, |
| video, querystd, std_id); |
| mutex_unlock(&video->lock); |
| return ret; |
| } |
| |
| /* |
| * vpfe_s_std() - set std on external subdev |
| * @file: file pointer |
| * @priv: void pointer |
| * @std_id: pointer to v4l2_std_id structure |
| * |
| * set std pointed by std_id on external subdev by calling it using |
| * v4l2_device_call_until_err |
| * |
| * Return 0 on success, error code otherwise |
| */ |
| static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct vpfe_ext_subdev_info *sdinfo; |
| int ret; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n"); |
| |
| /* Call decoder driver function to set the standard */ |
| ret = mutex_lock_interruptible(&video->lock); |
| if (ret) |
| return ret; |
| sdinfo = video->current_ext_subdev; |
| /* If streaming is started, return device busy error */ |
| if (video->started) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n"); |
| ret = -EBUSY; |
| goto unlock_out; |
| } |
| ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, |
| video, s_std, std_id); |
| if (ret < 0) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n"); |
| video->stdid = V4L2_STD_UNKNOWN; |
| goto unlock_out; |
| } |
| video->stdid = std_id; |
| unlock_out: |
| mutex_unlock(&video->lock); |
| return ret; |
| } |
| |
| static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *tvnorm) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n"); |
| *tvnorm = video->stdid; |
| return 0; |
| } |
| |
| /* |
| * vpfe_enum_dv_timings() - enumerate dv_timings which are supported by |
| * to external subdev |
| * @file: file pointer |
| * @priv: void pointer |
| * @timings: pointer to v4l2_enum_dv_timings structure |
| * |
| * enum dv_timings's which are supported by external subdev through |
| * v4l2_subdev_call |
| * |
| * Return 0 on success, error code otherwise |
| */ |
| static int |
| vpfe_enum_dv_timings(struct file *file, void *fh, |
| struct v4l2_enum_dv_timings *timings) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct v4l2_subdev *subdev = video->current_ext_subdev->subdev; |
| |
| timings->pad = 0; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_dv_timings\n"); |
| return v4l2_subdev_call(subdev, pad, enum_dv_timings, timings); |
| } |
| |
| /* |
| * vpfe_query_dv_timings() - query the dv_timings which is being input |
| * to external subdev |
| * @file: file pointer |
| * @priv: void pointer |
| * @timings: pointer to v4l2_dv_timings structure |
| * |
| * get dv_timings which is being input on external subdev through |
| * v4l2_subdev_call |
| * |
| * Return 0 on success, error code otherwise |
| */ |
| static int |
| vpfe_query_dv_timings(struct file *file, void *fh, |
| struct v4l2_dv_timings *timings) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct v4l2_subdev *subdev = video->current_ext_subdev->subdev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_query_dv_timings\n"); |
| return v4l2_subdev_call(subdev, video, query_dv_timings, timings); |
| } |
| |
| /* |
| * vpfe_s_dv_timings() - set dv_timings on external subdev |
| * @file: file pointer |
| * @priv: void pointer |
| * @timings: pointer to v4l2_dv_timings structure |
| * |
| * set dv_timings pointed by timings on external subdev through |
| * v4l2_device_call_until_err, this configures amplifier also |
| * |
| * Return 0 on success, error code otherwise |
| */ |
| static int |
| vpfe_s_dv_timings(struct file *file, void *fh, |
| struct v4l2_dv_timings *timings) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_dv_timings\n"); |
| |
| video->stdid = V4L2_STD_UNKNOWN; |
| return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, |
| video->current_ext_subdev->grp_id, |
| video, s_dv_timings, timings); |
| } |
| |
| /* |
| * vpfe_g_dv_timings() - get dv_timings which is set on external subdev |
| * @file: file pointer |
| * @priv: void pointer |
| * @timings: pointer to v4l2_dv_timings structure |
| * |
| * get dv_timings which is set on external subdev through |
| * v4l2_subdev_call |
| * |
| * Return 0 on success, error code otherwise |
| */ |
| static int |
| vpfe_g_dv_timings(struct file *file, void *fh, |
| struct v4l2_dv_timings *timings) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct v4l2_subdev *subdev = video->current_ext_subdev->subdev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_dv_timings\n"); |
| return v4l2_subdev_call(subdev, video, g_dv_timings, timings); |
| } |
| |
| /* |
| * Videobuf operations |
| */ |
| /* |
| * vpfe_buffer_queue_setup : Callback function for buffer setup. |
| * @vq: vb2_queue ptr |
| * @fmt: v4l2 format |
| * @nbuffers: ptr to number of buffers requested by application |
| * @nplanes:: contains number of distinct video planes needed to hold a frame |
| * @sizes[]: contains the size (in bytes) of each plane. |
| * @alloc_ctxs: ptr to allocation context |
| * |
| * This callback function is called when reqbuf() is called to adjust |
| * the buffer nbuffers and buffer size |
| */ |
| static int |
| vpfe_buffer_queue_setup(struct vb2_queue *vq, const void *parg, |
| unsigned int *nbuffers, unsigned int *nplanes, |
| unsigned int sizes[], void *alloc_ctxs[]) |
| { |
| struct vpfe_fh *fh = vb2_get_drv_priv(vq); |
| struct vpfe_video_device *video = fh->video; |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| unsigned long size; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue_setup\n"); |
| size = video->fmt.fmt.pix.sizeimage; |
| |
| if (vq->num_buffers + *nbuffers < 3) |
| *nbuffers = 3 - vq->num_buffers; |
| |
| *nplanes = 1; |
| sizes[0] = size; |
| alloc_ctxs[0] = video->alloc_ctx; |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, |
| "nbuffers=%d, size=%lu\n", *nbuffers, size); |
| return 0; |
| } |
| |
| /* |
| * vpfe_buffer_prepare : callback function for buffer prepare |
| * @vb: ptr to vb2_buffer |
| * |
| * This is the callback function for buffer prepare when vb2_qbuf() |
| * function is called. The buffer is prepared and user space virtual address |
| * or user address is converted into physical address |
| */ |
| static int vpfe_buffer_prepare(struct vb2_buffer *vb) |
| { |
| struct vpfe_fh *fh = vb2_get_drv_priv(vb->vb2_queue); |
| struct vpfe_video_device *video = fh->video; |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| unsigned long addr; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n"); |
| |
| if (vb->state != VB2_BUF_STATE_ACTIVE && |
| vb->state != VB2_BUF_STATE_PREPARED) |
| return 0; |
| |
| /* Initialize buffer */ |
| vb2_set_plane_payload(vb, 0, video->fmt.fmt.pix.sizeimage); |
| if (vb2_plane_vaddr(vb, 0) && |
| vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) |
| return -EINVAL; |
| |
| addr = vb2_dma_contig_plane_dma_addr(vb, 0); |
| /* Make sure user addresses are aligned to 32 bytes */ |
| if (!ALIGN(addr, 32)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static void vpfe_buffer_queue(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| /* Get the file handle object and device object */ |
| struct vpfe_fh *fh = vb2_get_drv_priv(vb->vb2_queue); |
| struct vpfe_video_device *video = fh->video; |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct vpfe_pipeline *pipe = &video->pipe; |
| struct vpfe_cap_buffer *buf = container_of(vbuf, |
| struct vpfe_cap_buffer, vb); |
| unsigned long flags; |
| unsigned long empty; |
| unsigned long addr; |
| |
| spin_lock_irqsave(&video->dma_queue_lock, flags); |
| empty = list_empty(&video->dma_queue); |
| /* add the buffer to the DMA queue */ |
| list_add_tail(&buf->list, &video->dma_queue); |
| spin_unlock_irqrestore(&video->dma_queue_lock, flags); |
| /* this case happens in case of single shot */ |
| if (empty && video->started && pipe->state == |
| VPFE_PIPELINE_STREAM_SINGLESHOT && |
| video->state == VPFE_VIDEO_BUFFER_NOT_QUEUED) { |
| spin_lock(&video->dma_queue_lock); |
| addr = vpfe_video_get_next_buffer(video); |
| video->ops->queue(vpfe_dev, addr); |
| |
| video->state = VPFE_VIDEO_BUFFER_QUEUED; |
| spin_unlock(&video->dma_queue_lock); |
| |
| /* enable h/w each time in single shot */ |
| if (vpfe_video_is_pipe_ready(pipe)) |
| vpfe_pipeline_set_stream(pipe, |
| VPFE_PIPELINE_STREAM_SINGLESHOT); |
| } |
| } |
| |
| /* vpfe_start_capture() - start streaming on all the subdevs */ |
| static int vpfe_start_capture(struct vpfe_video_device *video) |
| { |
| struct vpfe_pipeline *pipe = &video->pipe; |
| int ret = 0; |
| |
| video->started = 1; |
| if (vpfe_video_is_pipe_ready(pipe)) |
| ret = vpfe_pipeline_set_stream(pipe, pipe->state); |
| |
| return ret; |
| } |
| |
| static int vpfe_start_streaming(struct vb2_queue *vq, unsigned int count) |
| { |
| struct vpfe_fh *fh = vb2_get_drv_priv(vq); |
| struct vpfe_video_device *video = fh->video; |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| unsigned long addr; |
| int ret; |
| |
| ret = mutex_lock_interruptible(&video->lock); |
| if (ret) |
| goto streamoff; |
| |
| /* Get the next frame from the buffer queue */ |
| video->cur_frm = video->next_frm = |
| list_entry(video->dma_queue.next, struct vpfe_cap_buffer, list); |
| /* Remove buffer from the buffer queue */ |
| list_del(&video->cur_frm->list); |
| /* Mark state of the current frame to active */ |
| video->cur_frm->vb.vb2_buf.state = VB2_BUF_STATE_ACTIVE; |
| /* Initialize field_id and started member */ |
| video->field_id = 0; |
| addr = vb2_dma_contig_plane_dma_addr(&video->cur_frm->vb.vb2_buf, 0); |
| video->ops->queue(vpfe_dev, addr); |
| video->state = VPFE_VIDEO_BUFFER_QUEUED; |
| |
| ret = vpfe_start_capture(video); |
| if (ret) { |
| struct vpfe_cap_buffer *buf, *tmp; |
| |
| vb2_buffer_done(&video->cur_frm->vb.vb2_buf, |
| VB2_BUF_STATE_QUEUED); |
| list_for_each_entry_safe(buf, tmp, &video->dma_queue, list) { |
| list_del(&buf->list); |
| vb2_buffer_done(&buf->vb.vb2_buf, |
| VB2_BUF_STATE_QUEUED); |
| } |
| goto unlock_out; |
| } |
| |
| mutex_unlock(&video->lock); |
| |
| return ret; |
| unlock_out: |
| mutex_unlock(&video->lock); |
| streamoff: |
| ret = vb2_streamoff(&video->buffer_queue, video->buffer_queue.type); |
| return 0; |
| } |
| |
| static int vpfe_buffer_init(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| struct vpfe_cap_buffer *buf = container_of(vbuf, |
| struct vpfe_cap_buffer, vb); |
| |
| INIT_LIST_HEAD(&buf->list); |
| return 0; |
| } |
| |
| /* abort streaming and wait for last buffer */ |
| static void vpfe_stop_streaming(struct vb2_queue *vq) |
| { |
| struct vpfe_fh *fh = vb2_get_drv_priv(vq); |
| struct vpfe_video_device *video = fh->video; |
| |
| /* release all active buffers */ |
| if (video->cur_frm == video->next_frm) { |
| vb2_buffer_done(&video->cur_frm->vb.vb2_buf, |
| VB2_BUF_STATE_ERROR); |
| } else { |
| if (video->cur_frm != NULL) |
| vb2_buffer_done(&video->cur_frm->vb.vb2_buf, |
| VB2_BUF_STATE_ERROR); |
| if (video->next_frm != NULL) |
| vb2_buffer_done(&video->next_frm->vb.vb2_buf, |
| VB2_BUF_STATE_ERROR); |
| } |
| |
| while (!list_empty(&video->dma_queue)) { |
| video->next_frm = list_entry(video->dma_queue.next, |
| struct vpfe_cap_buffer, list); |
| list_del(&video->next_frm->list); |
| vb2_buffer_done(&video->next_frm->vb.vb2_buf, |
| VB2_BUF_STATE_ERROR); |
| } |
| } |
| |
| static void vpfe_buf_cleanup(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| struct vpfe_fh *fh = vb2_get_drv_priv(vb->vb2_queue); |
| struct vpfe_video_device *video = fh->video; |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct vpfe_cap_buffer *buf = container_of(vbuf, |
| struct vpfe_cap_buffer, vb); |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buf_cleanup\n"); |
| if (vb->state == VB2_BUF_STATE_ACTIVE) |
| list_del_init(&buf->list); |
| } |
| |
| static struct vb2_ops video_qops = { |
| .queue_setup = vpfe_buffer_queue_setup, |
| .buf_init = vpfe_buffer_init, |
| .buf_prepare = vpfe_buffer_prepare, |
| .start_streaming = vpfe_start_streaming, |
| .stop_streaming = vpfe_stop_streaming, |
| .buf_cleanup = vpfe_buf_cleanup, |
| .buf_queue = vpfe_buffer_queue, |
| }; |
| |
| /* |
| * vpfe_reqbufs() - supported REQBUF only once opening |
| * the device. |
| */ |
| static int vpfe_reqbufs(struct file *file, void *priv, |
| struct v4l2_requestbuffers *req_buf) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct vpfe_fh *fh = file->private_data; |
| struct vb2_queue *q; |
| int ret; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n"); |
| |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type && |
| V4L2_BUF_TYPE_VIDEO_OUTPUT != req_buf->type) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n"); |
| return -EINVAL; |
| } |
| |
| ret = mutex_lock_interruptible(&video->lock); |
| if (ret) |
| return ret; |
| |
| if (video->io_usrs != 0) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n"); |
| ret = -EBUSY; |
| goto unlock_out; |
| } |
| video->memory = req_buf->memory; |
| |
| /* Initialize videobuf2 queue as per the buffer type */ |
| video->alloc_ctx = vb2_dma_contig_init_ctx(vpfe_dev->pdev); |
| if (IS_ERR(video->alloc_ctx)) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Failed to get the context\n"); |
| return PTR_ERR(video->alloc_ctx); |
| } |
| |
| q = &video->buffer_queue; |
| q->type = req_buf->type; |
| q->io_modes = VB2_MMAP | VB2_USERPTR; |
| q->drv_priv = fh; |
| q->min_buffers_needed = 1; |
| q->ops = &video_qops; |
| q->mem_ops = &vb2_dma_contig_memops; |
| q->buf_struct_size = sizeof(struct vpfe_cap_buffer); |
| q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| |
| ret = vb2_queue_init(q); |
| if (ret) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "vb2_queue_init() failed\n"); |
| vb2_dma_contig_cleanup_ctx(vpfe_dev->pdev); |
| return ret; |
| } |
| |
| fh->io_allowed = 1; |
| video->io_usrs = 1; |
| INIT_LIST_HEAD(&video->dma_queue); |
| ret = vb2_reqbufs(&video->buffer_queue, req_buf); |
| |
| unlock_out: |
| mutex_unlock(&video->lock); |
| return ret; |
| } |
| |
| /* |
| * vpfe_querybuf() - query buffers for exchange |
| */ |
| static int vpfe_querybuf(struct file *file, void *priv, |
| struct v4l2_buffer *buf) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n"); |
| |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type && |
| V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); |
| return -EINVAL; |
| } |
| |
| if (video->memory != V4L2_MEMORY_MMAP) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n"); |
| return -EINVAL; |
| } |
| |
| /* Call vb2_querybuf to get information */ |
| return vb2_querybuf(&video->buffer_queue, buf); |
| } |
| |
| /* |
| * vpfe_qbuf() - queue buffers for capture or processing |
| */ |
| static int vpfe_qbuf(struct file *file, void *priv, |
| struct v4l2_buffer *p) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct vpfe_fh *fh = file->private_data; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n"); |
| |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type && |
| V4L2_BUF_TYPE_VIDEO_OUTPUT != p->type) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); |
| return -EINVAL; |
| } |
| /* |
| * If this file handle is not allowed to do IO, |
| * return error |
| */ |
| if (!fh->io_allowed) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); |
| return -EACCES; |
| } |
| |
| return vb2_qbuf(&video->buffer_queue, p); |
| } |
| |
| /* |
| * vpfe_dqbuf() - deque buffer which is done with processing |
| */ |
| static int vpfe_dqbuf(struct file *file, void *priv, |
| struct v4l2_buffer *buf) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n"); |
| |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type && |
| V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); |
| return -EINVAL; |
| } |
| |
| return vb2_dqbuf(&video->buffer_queue, |
| buf, (file->f_flags & O_NONBLOCK)); |
| } |
| |
| /* |
| * vpfe_streamon() - start streaming |
| * @file: file pointer |
| * @priv: void pointer |
| * @buf_type: enum v4l2_buf_type |
| * |
| * queue buffer onto hardware for capture/processing and |
| * start all the subdevs which are in media chain |
| * |
| * Return 0 on success, error code otherwise |
| */ |
| static int vpfe_streamon(struct file *file, void *priv, |
| enum v4l2_buf_type buf_type) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct vpfe_pipeline *pipe = &video->pipe; |
| struct vpfe_fh *fh = file->private_data; |
| struct vpfe_ext_subdev_info *sdinfo; |
| int ret = -EINVAL; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n"); |
| |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type && |
| V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); |
| return ret; |
| } |
| /* If file handle is not allowed IO, return error */ |
| if (!fh->io_allowed) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); |
| return -EACCES; |
| } |
| sdinfo = video->current_ext_subdev; |
| /* If buffer queue is empty, return error */ |
| if (list_empty(&video->buffer_queue.queued_list)) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n"); |
| return -EIO; |
| } |
| /* Validate the pipeline */ |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE == buf_type) { |
| ret = vpfe_video_validate_pipeline(pipe); |
| if (ret < 0) |
| return ret; |
| } |
| /* Call vb2_streamon to start streaming */ |
| return vb2_streamon(&video->buffer_queue, buf_type); |
| } |
| |
| /* |
| * vpfe_streamoff() - stop streaming |
| * @file: file pointer |
| * @priv: void pointer |
| * @buf_type: enum v4l2_buf_type |
| * |
| * stop all the subdevs which are in media chain |
| * |
| * Return 0 on success, error code otherwise |
| */ |
| static int vpfe_streamoff(struct file *file, void *priv, |
| enum v4l2_buf_type buf_type) |
| { |
| struct vpfe_video_device *video = video_drvdata(file); |
| struct vpfe_device *vpfe_dev = video->vpfe_dev; |
| struct vpfe_fh *fh = file->private_data; |
| int ret = 0; |
| |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n"); |
| |
| if (buf_type != V4L2_BUF_TYPE_VIDEO_CAPTURE && |
| buf_type != V4L2_BUF_TYPE_VIDEO_OUTPUT) { |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "Invalid buf type\n"); |
| return -EINVAL; |
| } |
| |
| /* If io is allowed for this file handle, return error */ |
| if (!fh->io_allowed) { |
| v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "fh->io_allowed\n"); |
| return -EACCES; |
| } |
| |
| /* If streaming is not started, return error */ |
| if (!video->started) { |
| v4l2_err(&vpfe_dev->v4l2_dev, "device is not started\n"); |
| return -EINVAL; |
| } |
| |
| ret = mutex_lock_interruptible(&video->lock); |
| if (ret) |
| return ret; |
| |
| vpfe_stop_capture(video); |
| ret = vb2_streamoff(&video->buffer_queue, buf_type); |
| mutex_unlock(&video->lock); |
| |
| return ret; |
| } |
| |
| /* vpfe capture ioctl operations */ |
| static const struct v4l2_ioctl_ops vpfe_ioctl_ops = { |
| .vidioc_querycap = vpfe_querycap, |
| .vidioc_g_fmt_vid_cap = vpfe_g_fmt, |
| .vidioc_s_fmt_vid_cap = vpfe_s_fmt, |
| .vidioc_try_fmt_vid_cap = vpfe_try_fmt, |
| .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt, |
| .vidioc_g_fmt_vid_out = vpfe_g_fmt, |
| .vidioc_s_fmt_vid_out = vpfe_s_fmt, |
| .vidioc_try_fmt_vid_out = vpfe_try_fmt, |
| .vidioc_enum_fmt_vid_out = vpfe_enum_fmt, |
| .vidioc_enum_input = vpfe_enum_input, |
| .vidioc_g_input = vpfe_g_input, |
| .vidioc_s_input = vpfe_s_input, |
| .vidioc_querystd = vpfe_querystd, |
| .vidioc_s_std = vpfe_s_std, |
| .vidioc_g_std = vpfe_g_std, |
| .vidioc_enum_dv_timings = vpfe_enum_dv_timings, |
| .vidioc_query_dv_timings = vpfe_query_dv_timings, |
| .vidioc_s_dv_timings = vpfe_s_dv_timings, |
| .vidioc_g_dv_timings = vpfe_g_dv_timings, |
| .vidioc_reqbufs = vpfe_reqbufs, |
| .vidioc_querybuf = vpfe_querybuf, |
| .vidioc_qbuf = vpfe_qbuf, |
| .vidioc_dqbuf = vpfe_dqbuf, |
| .vidioc_streamon = vpfe_streamon, |
| .vidioc_streamoff = vpfe_streamoff, |
| }; |
| |
| /* VPFE video init function */ |
| int vpfe_video_init(struct vpfe_video_device *video, const char *name) |
| { |
| const char *direction; |
| int ret; |
| |
| switch (video->type) { |
| case V4L2_BUF_TYPE_VIDEO_CAPTURE: |
| direction = "output"; |
| video->pad.flags = MEDIA_PAD_FL_SINK; |
| video->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| break; |
| |
| case V4L2_BUF_TYPE_VIDEO_OUTPUT: |
| direction = "input"; |
| video->pad.flags = MEDIA_PAD_FL_SOURCE; |
| video->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| /* Initialize field of video device */ |
| video->video_dev.release = video_device_release; |
| video->video_dev.fops = &vpfe_fops; |
| video->video_dev.ioctl_ops = &vpfe_ioctl_ops; |
| video->video_dev.minor = -1; |
| video->video_dev.tvnorms = 0; |
| snprintf(video->video_dev.name, sizeof(video->video_dev.name), |
| "DAVINCI VIDEO %s %s", name, direction); |
| |
| spin_lock_init(&video->irqlock); |
| spin_lock_init(&video->dma_queue_lock); |
| mutex_init(&video->lock); |
| ret = media_entity_init(&video->video_dev.entity, |
| 1, &video->pad, 0); |
| if (ret < 0) |
| return ret; |
| |
| video_set_drvdata(&video->video_dev, video); |
| |
| return 0; |
| } |
| |
| /* vpfe video device register function */ |
| int vpfe_video_register(struct vpfe_video_device *video, |
| struct v4l2_device *vdev) |
| { |
| int ret; |
| |
| video->video_dev.v4l2_dev = vdev; |
| |
| ret = video_register_device(&video->video_dev, VFL_TYPE_GRABBER, -1); |
| if (ret < 0) |
| pr_err("%s: could not register video device (%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| /* vpfe video device unregister function */ |
| void vpfe_video_unregister(struct vpfe_video_device *video) |
| { |
| if (video_is_registered(&video->video_dev)) { |
| video_unregister_device(&video->video_dev); |
| media_entity_cleanup(&video->video_dev.entity); |
| } |
| } |