blob: 80907b46441294989db1a4ae4659efd49c2266fa [file] [log] [blame]
/*
* Copyright (C) 2012 Texas Instruments Inc
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Contributors:
* Manjunath Hadli <manjunath.hadli@ti.com>
* Prabhakar Lad <prabhakar.lad@ti.com>
*/
#include <linux/delay.h>
#include "dm365_isif.h"
#include "vpfe_mc_capture.h"
#define MAX_WIDTH 4096
#define MAX_HEIGHT 4096
static const unsigned int isif_fmts[] = {
MEDIA_BUS_FMT_YUYV8_2X8,
MEDIA_BUS_FMT_UYVY8_2X8,
MEDIA_BUS_FMT_YUYV8_1X16,
MEDIA_BUS_FMT_YUYV10_1X20,
MEDIA_BUS_FMT_SGRBG12_1X12,
MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8,
MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
};
#define ISIF_COLPTN_R_Ye 0x0
#define ISIF_COLPTN_Gr_Cy 0x1
#define ISIF_COLPTN_Gb_G 0x2
#define ISIF_COLPTN_B_Mg 0x3
#define ISIF_CCOLP_CP01_0 0
#define ISIF_CCOLP_CP03_2 2
#define ISIF_CCOLP_CP05_4 4
#define ISIF_CCOLP_CP07_6 6
#define ISIF_CCOLP_CP11_0 8
#define ISIF_CCOLP_CP13_2 10
#define ISIF_CCOLP_CP15_4 12
#define ISIF_CCOLP_CP17_6 14
static const u32 isif_sgrbg_pattern =
ISIF_COLPTN_Gr_Cy << ISIF_CCOLP_CP01_0 |
ISIF_COLPTN_R_Ye << ISIF_CCOLP_CP03_2 |
ISIF_COLPTN_B_Mg << ISIF_CCOLP_CP05_4 |
ISIF_COLPTN_Gb_G << ISIF_CCOLP_CP07_6 |
ISIF_COLPTN_Gr_Cy << ISIF_CCOLP_CP11_0 |
ISIF_COLPTN_R_Ye << ISIF_CCOLP_CP13_2 |
ISIF_COLPTN_B_Mg << ISIF_CCOLP_CP15_4 |
ISIF_COLPTN_Gb_G << ISIF_CCOLP_CP17_6;
static const u32 isif_srggb_pattern =
ISIF_COLPTN_R_Ye << ISIF_CCOLP_CP01_0 |
ISIF_COLPTN_Gr_Cy << ISIF_CCOLP_CP03_2 |
ISIF_COLPTN_Gb_G << ISIF_CCOLP_CP05_4 |
ISIF_COLPTN_B_Mg << ISIF_CCOLP_CP07_6 |
ISIF_COLPTN_R_Ye << ISIF_CCOLP_CP11_0 |
ISIF_COLPTN_Gr_Cy << ISIF_CCOLP_CP13_2 |
ISIF_COLPTN_Gb_G << ISIF_CCOLP_CP15_4 |
ISIF_COLPTN_B_Mg << ISIF_CCOLP_CP17_6;
static inline u32 isif_read(void __iomem *base_addr, u32 offset)
{
return readl(base_addr + offset);
}
static inline void isif_write(void __iomem *base_addr, u32 val, u32 offset)
{
writel(val, base_addr + offset);
}
static inline u32 isif_merge(void __iomem *base_addr, u32 mask, u32 val,
u32 offset)
{
u32 new_val = (isif_read(base_addr, offset) & ~mask) | (val & mask);
isif_write(base_addr, new_val, offset);
return new_val;
}
static void isif_enable_output_to_sdram(struct vpfe_isif_device *isif, int en)
{
isif_merge(isif->isif_cfg.base_addr, ISIF_SYNCEN_WEN_MASK,
en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN);
}
static inline void
isif_regw_lin_tbl(struct vpfe_isif_device *isif, u32 val, u32 offset, int i)
{
if (!i)
writel(val, isif->isif_cfg.linear_tbl0_addr + offset);
else
writel(val, isif->isif_cfg.linear_tbl1_addr + offset);
}
static void isif_disable_all_modules(struct vpfe_isif_device *isif)
{
/* disable BC */
isif_write(isif->isif_cfg.base_addr, 0, CLAMPCFG);
/* disable vdfc */
isif_write(isif->isif_cfg.base_addr, 0, DFCCTL);
/* disable CSC */
isif_write(isif->isif_cfg.base_addr, 0, CSCCTL);
/* disable linearization */
isif_write(isif->isif_cfg.base_addr, 0, LINCFG0);
}
static void isif_enable(struct vpfe_isif_device *isif, int en)
{
if (!en)
/* Before disable isif, disable all ISIF modules */
isif_disable_all_modules(isif);
/*
* wait for next VD. Assume lowest scan rate is 12 Hz. So
* 100 msec delay is good enough
*/
msleep(100);
isif_merge(isif->isif_cfg.base_addr, ISIF_SYNCEN_VDHDEN_MASK,
en, SYNCEN);
}
/*
* ISIF helper functions
*/
#define DM365_ISIF_MDFS_OFFSET 15
#define DM365_ISIF_MDFS_MASK 0x1
/* get field id in isif hardware */
enum v4l2_field vpfe_isif_get_fid(struct vpfe_device *vpfe_dev)
{
struct vpfe_isif_device *isif = &vpfe_dev->vpfe_isif;
u32 field_status;
field_status = isif_read(isif->isif_cfg.base_addr, MODESET);
field_status = (field_status >> DM365_ISIF_MDFS_OFFSET) &
DM365_ISIF_MDFS_MASK;
return field_status;
}
static int
isif_set_pixel_format(struct vpfe_isif_device *isif, unsigned int pixfmt)
{
if (isif->formats[ISIF_PAD_SINK].code == MEDIA_BUS_FMT_SGRBG12_1X12) {
if (pixfmt == V4L2_PIX_FMT_SBGGR16)
isif->isif_cfg.data_pack = ISIF_PACK_16BIT;
else if ((pixfmt == V4L2_PIX_FMT_SGRBG10DPCM8) ||
(pixfmt == V4L2_PIX_FMT_SGRBG10ALAW8))
isif->isif_cfg.data_pack = ISIF_PACK_8BIT;
else
return -EINVAL;
isif->isif_cfg.bayer.pix_fmt = ISIF_PIXFMT_RAW;
isif->isif_cfg.bayer.v4l2_pix_fmt = pixfmt;
} else {
if (pixfmt == V4L2_PIX_FMT_YUYV)
isif->isif_cfg.ycbcr.pix_order = ISIF_PIXORDER_YCBYCR;
else if (pixfmt == V4L2_PIX_FMT_UYVY)
isif->isif_cfg.ycbcr.pix_order = ISIF_PIXORDER_CBYCRY;
else
return -EINVAL;
isif->isif_cfg.data_pack = ISIF_PACK_8BIT;
isif->isif_cfg.ycbcr.v4l2_pix_fmt = pixfmt;
}
return 0;
}
static int
isif_set_frame_format(struct vpfe_isif_device *isif,
enum isif_frmfmt frm_fmt)
{
if (isif->formats[ISIF_PAD_SINK].code == MEDIA_BUS_FMT_SGRBG12_1X12)
isif->isif_cfg.bayer.frm_fmt = frm_fmt;
else
isif->isif_cfg.ycbcr.frm_fmt = frm_fmt;
return 0;
}
static int isif_set_image_window(struct vpfe_isif_device *isif)
{
struct v4l2_rect *win = &isif->crop;
if (isif->formats[ISIF_PAD_SINK].code == MEDIA_BUS_FMT_SGRBG12_1X12) {
isif->isif_cfg.bayer.win.top = win->top;
isif->isif_cfg.bayer.win.left = win->left;
isif->isif_cfg.bayer.win.width = win->width;
isif->isif_cfg.bayer.win.height = win->height;
return 0;
}
isif->isif_cfg.ycbcr.win.top = win->top;
isif->isif_cfg.ycbcr.win.left = win->left;
isif->isif_cfg.ycbcr.win.width = win->width;
isif->isif_cfg.ycbcr.win.height = win->height;
return 0;
}
static int
isif_set_buftype(struct vpfe_isif_device *isif, enum isif_buftype buf_type)
{
if (isif->formats[ISIF_PAD_SINK].code == MEDIA_BUS_FMT_SGRBG12_1X12)
isif->isif_cfg.bayer.buf_type = buf_type;
else
isif->isif_cfg.ycbcr.buf_type = buf_type;
return 0;
}
/* configure format in isif hardware */
static int
isif_config_format(struct vpfe_device *vpfe_dev, unsigned int pad)
{
struct vpfe_isif_device *vpfe_isif = &vpfe_dev->vpfe_isif;
enum isif_frmfmt frm_fmt = ISIF_FRMFMT_INTERLACED;
struct v4l2_pix_format format;
int ret = 0;
v4l2_fill_pix_format(&format, &vpfe_dev->vpfe_isif.formats[pad]);
mbus_to_pix(&vpfe_dev->vpfe_isif.formats[pad], &format);
if (isif_set_pixel_format(vpfe_isif, format.pixelformat) < 0) {
v4l2_err(&vpfe_dev->v4l2_dev,
"Failed to set pixel format in isif\n");
return -EINVAL;
}
/* call for s_crop will override these values */
vpfe_isif->crop.left = 0;
vpfe_isif->crop.top = 0;
vpfe_isif->crop.width = format.width;
vpfe_isif->crop.height = format.height;
/* configure the image window */
isif_set_image_window(vpfe_isif);
switch (vpfe_dev->vpfe_isif.formats[pad].field) {
case V4L2_FIELD_INTERLACED:
/* do nothing, since it is default */
ret = isif_set_buftype(vpfe_isif, ISIF_BUFTYPE_FLD_INTERLEAVED);
break;
case V4L2_FIELD_NONE:
frm_fmt = ISIF_FRMFMT_PROGRESSIVE;
/* buffer type only applicable for interlaced scan */
break;
case V4L2_FIELD_SEQ_TB:
ret = isif_set_buftype(vpfe_isif, ISIF_BUFTYPE_FLD_SEPARATED);
break;
default:
return -EINVAL;
}
/* set the frame format */
if (!ret)
ret = isif_set_frame_format(vpfe_isif, frm_fmt);
return ret;
}
/*
* isif_try_format() - Try video format on a pad
* @isif: VPFE isif device
* @cfg: V4L2 subdev pad config
* @fmt: pointer to v4l2 subdev format structure
*/
static void
isif_try_format(struct vpfe_isif_device *isif, struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
unsigned int width = fmt->format.width;
unsigned int height = fmt->format.height;
unsigned int i;
for (i = 0; i < ARRAY_SIZE(isif_fmts); i++) {
if (fmt->format.code == isif_fmts[i])
break;
}
/* If not found, use YUYV8_2x8 as default */
if (i >= ARRAY_SIZE(isif_fmts))
fmt->format.code = MEDIA_BUS_FMT_YUYV8_2X8;
/* Clamp the size. */
fmt->format.width = clamp_t(u32, width, 32, MAX_WIDTH);
fmt->format.height = clamp_t(u32, height, 32, MAX_HEIGHT);
/* The data formatter truncates the number of horizontal output
* pixels to a multiple of 16. To avoid clipping data, allow
* callers to request an output size bigger than the input size
* up to the nearest multiple of 16.
*/
if (fmt->pad == ISIF_PAD_SOURCE)
fmt->format.width &= ~15;
}
/*
* vpfe_isif_buffer_isr() - isif module non-progressive buffer scheduling isr
* @isif: Pointer to isif subdevice.
*/
void vpfe_isif_buffer_isr(struct vpfe_isif_device *isif)
{
struct vpfe_device *vpfe_dev = to_vpfe_device(isif);
struct vpfe_video_device *video = &isif->video_out;
enum v4l2_field field;
int fid;
if (!video->started)
return;
field = video->fmt.fmt.pix.field;
if (field == V4L2_FIELD_NONE) {
/* handle progressive frame capture */
if (video->cur_frm != video->next_frm)
vpfe_video_process_buffer_complete(video);
return;
}
/* interlaced or TB capture check which field we
* are in hardware
*/
fid = vpfe_isif_get_fid(vpfe_dev);
/* switch the software maintained field id */
video->field_id ^= 1;
if (fid == video->field_id) {
/* we are in-sync here,continue */
if (fid == 0) {
/*
* One frame is just being captured. If the
* next frame is available, release the current
* frame and move on
*/
if (video->cur_frm != video->next_frm)
vpfe_video_process_buffer_complete(video);
/*
* based on whether the two fields are stored
* interleavely or separately in memory,
* reconfigure the ISIF memory address
*/
if (field == V4L2_FIELD_SEQ_TB)
vpfe_video_schedule_bottom_field(video);
return;
}
/*
* if one field is just being captured configure
* the next frame get the next frame from the
* empty queue if no frame is available hold on
* to the current buffer
*/
spin_lock(&video->dma_queue_lock);
if (!list_empty(&video->dma_queue) &&
video->cur_frm == video->next_frm)
vpfe_video_schedule_next_buffer(video);
spin_unlock(&video->dma_queue_lock);
} else if (fid == 0) {
/*
* out of sync. Recover from any hardware out-of-sync.
* May loose one frame
*/
video->field_id = fid;
}
}
/*
* vpfe_isif_vidint1_isr() - ISIF module progressive buffer scheduling isr
* @isif: Pointer to isif subdevice.
*/
void vpfe_isif_vidint1_isr(struct vpfe_isif_device *isif)
{
struct vpfe_video_device *video = &isif->video_out;
if (!video->started)
return;
spin_lock(&video->dma_queue_lock);
if (video->fmt.fmt.pix.field == V4L2_FIELD_NONE &&
!list_empty(&video->dma_queue) && video->cur_frm == video->next_frm)
vpfe_video_schedule_next_buffer(video);
spin_unlock(&video->dma_queue_lock);
}
/*
* VPFE video operations
*/
static int isif_video_queue(struct vpfe_device *vpfe_dev, unsigned long addr)
{
struct vpfe_isif_device *isif = &vpfe_dev->vpfe_isif;
isif_write(isif->isif_cfg.base_addr, (addr >> 21) &
ISIF_CADU_BITS, CADU);
isif_write(isif->isif_cfg.base_addr, (addr >> 5) &
ISIF_CADL_BITS, CADL);
return 0;
}
static const struct vpfe_video_operations isif_video_ops = {
.queue = isif_video_queue,
};
/*
* V4L2 subdev operations
*/
/* Parameter operations */
static int isif_get_params(struct v4l2_subdev *sd, void *params)
{
struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
/* only raw module parameters can be set through the IOCTL */
if (isif->formats[ISIF_PAD_SINK].code != MEDIA_BUS_FMT_SGRBG12_1X12)
return -EINVAL;
memcpy(params, &isif->isif_cfg.bayer.config_params,
sizeof(isif->isif_cfg.bayer.config_params));
return 0;
}
static int isif_validate_df_csc_params(struct vpfe_isif_df_csc *df_csc)
{
struct vpfe_isif_color_space_conv *csc;
int err = -EINVAL;
int i;
if (!df_csc->df_or_csc) {
/* csc configuration */
csc = &df_csc->csc;
if (csc->en) {
for (i = 0; i < VPFE_ISIF_CSC_NUM_COEFF; i++)
if (csc->coeff[i].integer >
ISIF_CSC_COEF_INTEG_MASK ||
csc->coeff[i].decimal >
ISIF_CSC_COEF_DECIMAL_MASK) {
pr_err("Invalid CSC coefficients\n");
return err;
}
}
}
if (df_csc->start_pix > ISIF_DF_CSC_SPH_MASK) {
pr_err("Invalid df_csc start pix value\n");
return err;
}
if (df_csc->num_pixels > ISIF_DF_NUMPIX) {
pr_err("Invalid df_csc num pixels value\n");
return err;
}
if (df_csc->start_line > ISIF_DF_CSC_LNH_MASK) {
pr_err("Invalid df_csc start_line value\n");
return err;
}
if (df_csc->num_lines > ISIF_DF_NUMLINES) {
pr_err("Invalid df_csc num_lines value\n");
return err;
}
return 0;
}
#define DM365_ISIF_MAX_VDFLSFT 4
#define DM365_ISIF_MAX_VDFSLV 4095
#define DM365_ISIF_MAX_DFCMEM0 0x1fff
#define DM365_ISIF_MAX_DFCMEM1 0x1fff
static int isif_validate_dfc_params(struct vpfe_isif_dfc *dfc)
{
int err = -EINVAL;
int i;
if (!dfc->en)
return 0;
if (dfc->corr_whole_line > 1) {
pr_err("Invalid corr_whole_line value\n");
return err;
}
if (dfc->def_level_shift > DM365_ISIF_MAX_VDFLSFT) {
pr_err("Invalid def_level_shift value\n");
return err;
}
if (dfc->def_sat_level > DM365_ISIF_MAX_VDFSLV) {
pr_err("Invalid def_sat_level value\n");
return err;
}
if (!dfc->num_vdefects ||
dfc->num_vdefects > VPFE_ISIF_VDFC_TABLE_SIZE) {
pr_err("Invalid num_vdefects value\n");
return err;
}
for (i = 0; i < VPFE_ISIF_VDFC_TABLE_SIZE; i++) {
if (dfc->table[i].pos_vert > DM365_ISIF_MAX_DFCMEM0) {
pr_err("Invalid pos_vert value\n");
return err;
}
if (dfc->table[i].pos_horz > DM365_ISIF_MAX_DFCMEM1) {
pr_err("Invalid pos_horz value\n");
return err;
}
}
return 0;
}
#define DM365_ISIF_MAX_CLVRV 0xfff
#define DM365_ISIF_MAX_CLDC 0x1fff
#define DM365_ISIF_MAX_CLHSH 0x1fff
#define DM365_ISIF_MAX_CLHSV 0x1fff
#define DM365_ISIF_MAX_CLVSH 0x1fff
#define DM365_ISIF_MAX_CLVSV 0x1fff
#define DM365_ISIF_MAX_HEIGHT_BLACK_REGION 0x1fff
static int isif_validate_bclamp_params(struct vpfe_isif_black_clamp *bclamp)
{
int err = -EINVAL;
if (bclamp->dc_offset > DM365_ISIF_MAX_CLDC) {
pr_err("Invalid bclamp dc_offset value\n");
return err;
}
if (!bclamp->en)
return 0;
if (bclamp->horz.clamp_pix_limit > 1) {
pr_err("Invalid bclamp horz clamp_pix_limit value\n");
return err;
}
if (bclamp->horz.win_count_calc < 1 ||
bclamp->horz.win_count_calc > 32) {
pr_err("Invalid bclamp horz win_count_calc value\n");
return err;
}
if (bclamp->horz.win_start_h_calc > DM365_ISIF_MAX_CLHSH) {
pr_err("Invalid bclamp win_start_v_calc value\n");
return err;
}
if (bclamp->horz.win_start_v_calc > DM365_ISIF_MAX_CLHSV) {
pr_err("Invalid bclamp win_start_v_calc value\n");
return err;
}
if (bclamp->vert.reset_clamp_val > DM365_ISIF_MAX_CLVRV) {
pr_err("Invalid bclamp reset_clamp_val value\n");
return err;
}
if (bclamp->vert.ob_v_sz_calc > DM365_ISIF_MAX_HEIGHT_BLACK_REGION) {
pr_err("Invalid bclamp ob_v_sz_calc value\n");
return err;
}
if (bclamp->vert.ob_start_h > DM365_ISIF_MAX_CLVSH) {
pr_err("Invalid bclamp ob_start_h value\n");
return err;
}
if (bclamp->vert.ob_start_v > DM365_ISIF_MAX_CLVSV) {
pr_err("Invalid bclamp ob_start_h value\n");
return err;
}
return 0;
}
static int
isif_validate_raw_params(struct vpfe_isif_raw_config *params)
{
int ret;
ret = isif_validate_df_csc_params(&params->df_csc);
if (ret)
return ret;
ret = isif_validate_dfc_params(&params->dfc);
if (ret)
return ret;
ret = isif_validate_bclamp_params(&params->bclamp);
return ret;
}
static int isif_set_params(struct v4l2_subdev *sd, void *params)
{
struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
struct vpfe_isif_raw_config isif_raw_params;
int ret = -EINVAL;
/* only raw module parameters can be set through the IOCTL */
if (isif->formats[ISIF_PAD_SINK].code != MEDIA_BUS_FMT_SGRBG12_1X12)
return ret;
memcpy(&isif_raw_params, params, sizeof(isif_raw_params));
if (!isif_validate_raw_params(&isif_raw_params)) {
memcpy(&isif->isif_cfg.bayer.config_params, &isif_raw_params,
sizeof(isif_raw_params));
ret = 0;
}
return ret;
}
/*
* isif_ioctl() - isif module private ioctl's
* @sd: VPFE isif V4L2 subdevice
* @cmd: ioctl command
* @arg: ioctl argument
*
* Return 0 on success or a negative error code otherwise.
*/
static long isif_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
{
int ret;
switch (cmd) {
case VIDIOC_VPFE_ISIF_S_RAW_PARAMS:
ret = isif_set_params(sd, arg);
break;
case VIDIOC_VPFE_ISIF_G_RAW_PARAMS:
ret = isif_get_params(sd, arg);
break;
default:
ret = -ENOIOCTLCMD;
}
return ret;
}
static void isif_config_gain_offset(struct vpfe_isif_device *isif)
{
struct vpfe_isif_gain_offsets_adj *gain_off_ptr =
&isif->isif_cfg.bayer.config_params.gain_offset;
void __iomem *base = isif->isif_cfg.base_addr;
u32 val;
val = ((gain_off_ptr->gain_sdram_en & 1) << GAIN_SDRAM_EN_SHIFT) |
((gain_off_ptr->gain_ipipe_en & 1) << GAIN_IPIPE_EN_SHIFT) |
((gain_off_ptr->gain_h3a_en & 1) << GAIN_H3A_EN_SHIFT) |
((gain_off_ptr->offset_sdram_en & 1) << OFST_SDRAM_EN_SHIFT) |
((gain_off_ptr->offset_ipipe_en & 1) << OFST_IPIPE_EN_SHIFT) |
((gain_off_ptr->offset_h3a_en & 1) << OFST_H3A_EN_SHIFT);
isif_merge(base, GAIN_OFFSET_EN_MASK, val, CGAMMAWD);
isif_write(base, isif->isif_cfg.isif_gain_params.cr_gain, CRGAIN);
isif_write(base, isif->isif_cfg.isif_gain_params.cgr_gain, CGRGAIN);
isif_write(base, isif->isif_cfg.isif_gain_params.cgb_gain, CGBGAIN);
isif_write(base, isif->isif_cfg.isif_gain_params.cb_gain, CBGAIN);
isif_write(base, isif->isif_cfg.isif_gain_params.offset & OFFSET_MASK,
COFSTA);
}
static void isif_config_bclamp(struct vpfe_isif_device *isif,
struct vpfe_isif_black_clamp *bc)
{
u32 val;
/**
* DC Offset is always added to image data irrespective of bc enable
* status
*/
val = bc->dc_offset & ISIF_BC_DCOFFSET_MASK;
isif_write(isif->isif_cfg.base_addr, val, CLDCOFST);
if (!bc->en)
return;
val = (bc->bc_mode_color & ISIF_BC_MODE_COLOR_MASK) <<
ISIF_BC_MODE_COLOR_SHIFT;
/* Enable BC and horizontal clamp calculation paramaters */
val = val | 1 | ((bc->horz.mode & ISIF_HORZ_BC_MODE_MASK) <<
ISIF_HORZ_BC_MODE_SHIFT);
isif_write(isif->isif_cfg.base_addr, val, CLAMPCFG);
if (bc->horz.mode != VPFE_ISIF_HORZ_BC_DISABLE) {
/*
* Window count for calculation
* Base window selection
* pixel limit
* Horizontal size of window
* vertical size of the window
* Horizontal start position of the window
* Vertical start position of the window
*/
val = (bc->horz.win_count_calc & ISIF_HORZ_BC_WIN_COUNT_MASK) |
((bc->horz.base_win_sel_calc & 1) <<
ISIF_HORZ_BC_WIN_SEL_SHIFT) |
((bc->horz.clamp_pix_limit & 1) <<
ISIF_HORZ_BC_PIX_LIMIT_SHIFT) |
((bc->horz.win_h_sz_calc &
ISIF_HORZ_BC_WIN_H_SIZE_MASK) <<
ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) |
((bc->horz.win_v_sz_calc &
ISIF_HORZ_BC_WIN_V_SIZE_MASK) <<
ISIF_HORZ_BC_WIN_V_SIZE_SHIFT);
isif_write(isif->isif_cfg.base_addr, val, CLHWIN0);
val = bc->horz.win_start_h_calc & ISIF_HORZ_BC_WIN_START_H_MASK;
isif_write(isif->isif_cfg.base_addr, val, CLHWIN1);
val = bc->horz.win_start_v_calc & ISIF_HORZ_BC_WIN_START_V_MASK;
isif_write(isif->isif_cfg.base_addr, val, CLHWIN2);
}
/* vertical clamp calculation paramaters */
/* OB H Valid */
val = bc->vert.ob_h_sz_calc & ISIF_VERT_BC_OB_H_SZ_MASK;
/* Reset clamp value sel for previous line */
val |= (bc->vert.reset_val_sel & ISIF_VERT_BC_RST_VAL_SEL_MASK) <<
ISIF_VERT_BC_RST_VAL_SEL_SHIFT;
/* Line average coefficient */
val |= bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT;
isif_write(isif->isif_cfg.base_addr, val, CLVWIN0);
/* Configured reset value */
if (bc->vert.reset_val_sel == VPFE_ISIF_VERT_BC_USE_CONFIG_CLAMP_VAL) {
val = bc->vert.reset_clamp_val & ISIF_VERT_BC_RST_VAL_MASK;
isif_write(isif->isif_cfg.base_addr, val, CLVRV);
}
/* Optical Black horizontal start position */
val = bc->vert.ob_start_h & ISIF_VERT_BC_OB_START_HORZ_MASK;
isif_write(isif->isif_cfg.base_addr, val, CLVWIN1);
/* Optical Black vertical start position */
val = bc->vert.ob_start_v & ISIF_VERT_BC_OB_START_VERT_MASK;
isif_write(isif->isif_cfg.base_addr, val, CLVWIN2);
val = bc->vert.ob_v_sz_calc & ISIF_VERT_BC_OB_VERT_SZ_MASK;
isif_write(isif->isif_cfg.base_addr, val, CLVWIN3);
/* Vertical start position for BC subtraction */
val = bc->vert_start_sub & ISIF_BC_VERT_START_SUB_V_MASK;
isif_write(isif->isif_cfg.base_addr, val, CLSV);
}
/* This function will configure the window size to be capture in ISIF reg */
static void
isif_setwin(struct vpfe_isif_device *isif, struct v4l2_rect *image_win,
enum isif_frmfmt frm_fmt, int ppc, int mode)
{
int horz_nr_pixels;
int vert_nr_lines;
int horz_start;
int vert_start;
int mid_img;
/*
* ppc - per pixel count. indicates how many pixels per cell
* output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
* raw capture this is 1
*/
horz_start = image_win->left << (ppc - 1);
horz_nr_pixels = (image_win->width << (ppc - 1)) - 1;
/* Writing the horizontal info into the registers */
isif_write(isif->isif_cfg.base_addr,
horz_start & START_PX_HOR_MASK, SPH);
isif_write(isif->isif_cfg.base_addr,
horz_nr_pixels & NUM_PX_HOR_MASK, LNH);
vert_start = image_win->top;
if (frm_fmt == ISIF_FRMFMT_INTERLACED) {
vert_nr_lines = (image_win->height >> 1) - 1;
vert_start >>= 1;
/* To account for VD since line 0 doesn't have any data */
vert_start += 1;
} else {
/* To account for VD since line 0 doesn't have any data */
vert_start += 1;
vert_nr_lines = image_win->height - 1;
/* configure VDINT0 and VDINT1 */
mid_img = vert_start + (image_win->height / 2);
isif_write(isif->isif_cfg.base_addr, mid_img, VDINT1);
}
if (!mode)
isif_write(isif->isif_cfg.base_addr, 0, VDINT0);
else
isif_write(isif->isif_cfg.base_addr, vert_nr_lines, VDINT0);
isif_write(isif->isif_cfg.base_addr,
vert_start & START_VER_ONE_MASK, SLV0);
isif_write(isif->isif_cfg.base_addr,
vert_start & START_VER_TWO_MASK, SLV1);
isif_write(isif->isif_cfg.base_addr,
vert_nr_lines & NUM_LINES_VER, LNV);
}
#define DM365_ISIF_DFCMWR_MEMORY_WRITE 1
#define DM365_ISIF_DFCMRD_MEMORY_READ 0x2
static void
isif_config_dfc(struct vpfe_isif_device *isif, struct vpfe_isif_dfc *vdfc)
{
#define DFC_WRITE_WAIT_COUNT 1000
u32 count = DFC_WRITE_WAIT_COUNT;
u32 val;
int i;
if (!vdfc->en)
return;
/* Correction mode */
val = (vdfc->corr_mode & ISIF_VDFC_CORR_MOD_MASK) <<
ISIF_VDFC_CORR_MOD_SHIFT;
/* Correct whole line or partial */
if (vdfc->corr_whole_line)
val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT;
/* level shift value */
val |= (vdfc->def_level_shift & ISIF_VDFC_LEVEL_SHFT_MASK) <<
ISIF_VDFC_LEVEL_SHFT_SHIFT;
isif_write(isif->isif_cfg.base_addr, val, DFCCTL);
/* Defect saturation level */
val = vdfc->def_sat_level & ISIF_VDFC_SAT_LEVEL_MASK;
isif_write(isif->isif_cfg.base_addr, val, VDFSATLV);
isif_write(isif->isif_cfg.base_addr, vdfc->table[0].pos_vert &
ISIF_VDFC_POS_MASK, DFCMEM0);
isif_write(isif->isif_cfg.base_addr, vdfc->table[0].pos_horz &
ISIF_VDFC_POS_MASK, DFCMEM1);
if (vdfc->corr_mode == VPFE_ISIF_VDFC_NORMAL ||
vdfc->corr_mode == VPFE_ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
isif_write(isif->isif_cfg.base_addr,
vdfc->table[0].level_at_pos, DFCMEM2);
isif_write(isif->isif_cfg.base_addr,
vdfc->table[0].level_up_pixels, DFCMEM3);
isif_write(isif->isif_cfg.base_addr,
vdfc->table[0].level_low_pixels, DFCMEM4);
}
val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL);
/* set DFCMARST and set DFCMWR */
val |= 1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT;
val |= 1;
isif_write(isif->isif_cfg.base_addr, val, DFCMEMCTL);
while (count && (isif_read(isif->isif_cfg.base_addr, DFCMEMCTL) & 0x01))
count--;
val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL);
if (!count) {
pr_debug("defect table write timeout !!\n");
return;
}
for (i = 1; i < vdfc->num_vdefects; i++) {
isif_write(isif->isif_cfg.base_addr, vdfc->table[i].pos_vert &
ISIF_VDFC_POS_MASK, DFCMEM0);
isif_write(isif->isif_cfg.base_addr, vdfc->table[i].pos_horz &
ISIF_VDFC_POS_MASK, DFCMEM1);
if (vdfc->corr_mode == VPFE_ISIF_VDFC_NORMAL ||
vdfc->corr_mode == VPFE_ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
isif_write(isif->isif_cfg.base_addr,
vdfc->table[i].level_at_pos, DFCMEM2);
isif_write(isif->isif_cfg.base_addr,
vdfc->table[i].level_up_pixels, DFCMEM3);
isif_write(isif->isif_cfg.base_addr,
vdfc->table[i].level_low_pixels, DFCMEM4);
}
val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL);
/* clear DFCMARST and set DFCMWR */
val &= ~(1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT);
val |= 1;
isif_write(isif->isif_cfg.base_addr, val, DFCMEMCTL);
count = DFC_WRITE_WAIT_COUNT;
while (count && (isif_read(isif->isif_cfg.base_addr,
DFCMEMCTL) & 0x01))
count--;
val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL);
if (!count) {
pr_debug("defect table write timeout !!\n");
return;
}
}
if (vdfc->num_vdefects < VPFE_ISIF_VDFC_TABLE_SIZE) {
/* Extra cycle needed */
isif_write(isif->isif_cfg.base_addr, 0, DFCMEM0);
isif_write(isif->isif_cfg.base_addr,
DM365_ISIF_MAX_DFCMEM1, DFCMEM1);
isif_write(isif->isif_cfg.base_addr,
DM365_ISIF_DFCMWR_MEMORY_WRITE, DFCMEMCTL);
}
/* enable VDFC */
isif_merge(isif->isif_cfg.base_addr, (1 << ISIF_VDFC_EN_SHIFT),
(1 << ISIF_VDFC_EN_SHIFT), DFCCTL);
isif_merge(isif->isif_cfg.base_addr, (1 << ISIF_VDFC_EN_SHIFT),
(0 << ISIF_VDFC_EN_SHIFT), DFCCTL);
isif_write(isif->isif_cfg.base_addr, 0x6, DFCMEMCTL);
for (i = 0; i < vdfc->num_vdefects; i++) {
count = DFC_WRITE_WAIT_COUNT;
while (count &&
(isif_read(isif->isif_cfg.base_addr, DFCMEMCTL) & 0x2))
count--;
val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL);
if (!count) {
pr_debug("defect table write timeout !!\n");
return;
}
isif_write(isif->isif_cfg.base_addr,
DM365_ISIF_DFCMRD_MEMORY_READ, DFCMEMCTL);
}
}
static void
isif_config_csc(struct vpfe_isif_device *isif, struct vpfe_isif_df_csc *df_csc)
{
u32 val1;
u32 val2;
u32 i;
if (!df_csc->csc.en) {
isif_write(isif->isif_cfg.base_addr, 0, CSCCTL);
return;
}
/* initialize all bits to 0 */
val1 = 0;
for (i = 0; i < VPFE_ISIF_CSC_NUM_COEFF; i++) {
if ((i % 2) == 0) {
/* CSCM - LSB */
val1 = ((df_csc->csc.coeff[i].integer &
ISIF_CSC_COEF_INTEG_MASK) <<
ISIF_CSC_COEF_INTEG_SHIFT) |
((df_csc->csc.coeff[i].decimal &
ISIF_CSC_COEF_DECIMAL_MASK));
} else {
/* CSCM - MSB */
val2 = ((df_csc->csc.coeff[i].integer &
ISIF_CSC_COEF_INTEG_MASK) <<
ISIF_CSC_COEF_INTEG_SHIFT) |
((df_csc->csc.coeff[i].decimal &
ISIF_CSC_COEF_DECIMAL_MASK));
val2 <<= ISIF_CSCM_MSB_SHIFT;
val2 |= val1;
isif_write(isif->isif_cfg.base_addr, val2,
(CSCM0 + ((i-1) << 1)));
}
}
/* program the active area */
isif_write(isif->isif_cfg.base_addr, df_csc->start_pix &
ISIF_DF_CSC_SPH_MASK, FMTSPH);
/*
* one extra pixel as required for CSC. Actually number of
* pixel - 1 should be configured in this register. So we
* need to subtract 1 before writing to FMTSPH, but we will
* not do this since csc requires one extra pixel
*/
isif_write(isif->isif_cfg.base_addr, df_csc->num_pixels &
ISIF_DF_CSC_SPH_MASK, FMTLNH);
isif_write(isif->isif_cfg.base_addr, df_csc->start_line &
ISIF_DF_CSC_SPH_MASK, FMTSLV);
/*
* one extra line as required for CSC. See reason documented for
* num_pixels
*/
isif_write(isif->isif_cfg.base_addr, df_csc->num_lines &
ISIF_DF_CSC_SPH_MASK, FMTLNV);
/* Enable CSC */
isif_write(isif->isif_cfg.base_addr, 1, CSCCTL);
}
static void
isif_config_linearization(struct vpfe_isif_device *isif,
struct vpfe_isif_linearize *linearize)
{
u32 val;
u32 i;
if (!linearize->en) {
isif_write(isif->isif_cfg.base_addr, 0, LINCFG0);
return;
}
/* shift value for correction */
val = (linearize->corr_shft & ISIF_LIN_CORRSFT_MASK) <<
ISIF_LIN_CORRSFT_SHIFT;
/* enable */
val |= 1;
isif_write(isif->isif_cfg.base_addr, val, LINCFG0);
/* Scale factor */
val = (linearize->scale_fact.integer & 1) <<
ISIF_LIN_SCALE_FACT_INTEG_SHIFT;
val |= linearize->scale_fact.decimal & ISIF_LIN_SCALE_FACT_DECIMAL_MASK;
isif_write(isif->isif_cfg.base_addr, val, LINCFG1);
for (i = 0; i < VPFE_ISIF_LINEAR_TAB_SIZE; i++) {
val = linearize->table[i] & ISIF_LIN_ENTRY_MASK;
if (i%2)
isif_regw_lin_tbl(isif, val, ((i >> 1) << 2), 1);
else
isif_regw_lin_tbl(isif, val, ((i >> 1) << 2), 0);
}
}
static void
isif_config_culling(struct vpfe_isif_device *isif, struct vpfe_isif_cul *cul)
{
u32 val;
/* Horizontal pattern */
val = cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT;
val |= cul->hcpat_odd;
isif_write(isif->isif_cfg.base_addr, val, CULH);
/* vertical pattern */
isif_write(isif->isif_cfg.base_addr, cul->vcpat, CULV);
/* LPF */
isif_merge(isif->isif_cfg.base_addr, ISIF_LPF_MASK << ISIF_LPF_SHIFT,
cul->en_lpf << ISIF_LPF_SHIFT, MODESET);
}
static int isif_get_pix_fmt(u32 mbus_code)
{
switch (mbus_code) {
case MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8:
case MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8:
case MEDIA_BUS_FMT_SGRBG12_1X12:
return ISIF_PIXFMT_RAW;
case MEDIA_BUS_FMT_YUYV8_2X8:
case MEDIA_BUS_FMT_UYVY8_2X8:
case MEDIA_BUS_FMT_YUYV10_2X10:
case MEDIA_BUS_FMT_Y8_1X8:
return ISIF_PIXFMT_YCBCR_8BIT;
case MEDIA_BUS_FMT_YUYV8_1X16:
case MEDIA_BUS_FMT_YUYV10_1X20:
return ISIF_PIXFMT_YCBCR_16BIT;
default:
break;
}
return -EINVAL;
}
#define ISIF_INTERLACE_INVERSE_MODE 0x4b6d
#define ISIF_INTERLACE_NON_INVERSE_MODE 0x0b6d
#define ISIF_PROGRESSIVE_INVERSE_MODE 0x4000
#define ISIF_PROGRESSIVE_NON_INVERSE_MODE 0x0000
static int isif_config_raw(struct v4l2_subdev *sd, int mode)
{
struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
struct isif_params_raw *params = &isif->isif_cfg.bayer;
struct vpfe_isif_raw_config *module_params =
&isif->isif_cfg.bayer.config_params;
struct v4l2_mbus_framefmt *format;
int pix_fmt;
u32 val;
format = &isif->formats[ISIF_PAD_SINK];
/* In case of user has set BT656IF earlier, it should be reset
* when configuring for raw input.
*/
isif_write(isif->isif_cfg.base_addr, 0, REC656IF);
/* Configure CCDCFG register
* Set CCD Not to swap input since input is RAW data
* Set FID detection function to Latch at V-Sync
* Set WENLOG - isif valid area
* Set TRGSEL
* Set EXTRG
* Packed to 8 or 16 bits
*/
val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC |
ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN |
ISIF_CCDCFG_EXTRG_DISABLE | (isif->isif_cfg.data_pack &
ISIF_DATA_PACK_MASK);
isif_write(isif->isif_cfg.base_addr, val, CCDCFG);
pix_fmt = isif_get_pix_fmt(format->code);
if (pix_fmt < 0) {
pr_debug("Invalid pix_fmt(input mode)\n");
return -EINVAL;
}
/*
* Configure the vertical sync polarity(MODESET.VDPOL)
* Configure the horizontal sync polarity (MODESET.HDPOL)
* Configure frame id polarity (MODESET.FLDPOL)
* Configure data polarity
* Configure External WEN Selection
* Configure frame format(progressive or interlace)
* Configure pixel format (Input mode)
* Configure the data shift
*/
val = ISIF_VDHDOUT_INPUT | ((params->vd_pol & ISIF_VD_POL_MASK) <<
ISIF_VD_POL_SHIFT) | ((params->hd_pol & ISIF_HD_POL_MASK) <<
ISIF_HD_POL_SHIFT) | ((params->fid_pol & ISIF_FID_POL_MASK) <<
ISIF_FID_POL_SHIFT) | ((ISIF_DATAPOL_NORMAL &
ISIF_DATAPOL_MASK) << ISIF_DATAPOL_SHIFT) | ((ISIF_EXWEN_DISABLE &
ISIF_EXWEN_MASK) << ISIF_EXWEN_SHIFT) | ((params->frm_fmt &
ISIF_FRM_FMT_MASK) << ISIF_FRM_FMT_SHIFT) | ((pix_fmt &
ISIF_INPUT_MASK) << ISIF_INPUT_SHIFT);
/* currently only MEDIA_BUS_FMT_SGRBG12_1X12 is
* supported. shift appropriately depending on
* different MBUS fmt's added
*/
if (format->code == MEDIA_BUS_FMT_SGRBG12_1X12)
val |= ((VPFE_ISIF_NO_SHIFT &
ISIF_DATASFT_MASK) << ISIF_DATASFT_SHIFT);
isif_write(isif->isif_cfg.base_addr, val, MODESET);
/*
* Configure GAMMAWD register
* CFA pattern setting
*/
val = (params->cfa_pat & ISIF_GAMMAWD_CFA_MASK) <<
ISIF_GAMMAWD_CFA_SHIFT;
/* Gamma msb */
if (params->v4l2_pix_fmt == V4L2_PIX_FMT_SGRBG10ALAW8)
val = val | ISIF_ALAW_ENABLE;
val = val | ((params->data_msb & ISIF_ALAW_GAMA_WD_MASK) <<
ISIF_ALAW_GAMA_WD_SHIFT);
isif_write(isif->isif_cfg.base_addr, val, CGAMMAWD);
/* Configure DPCM compression settings */
if (params->v4l2_pix_fmt == V4L2_PIX_FMT_SGRBG10DPCM8) {
val = 1 << ISIF_DPCM_EN_SHIFT;
val |= (params->dpcm_predictor &
ISIF_DPCM_PREDICTOR_MASK) << ISIF_DPCM_PREDICTOR_SHIFT;
}
isif_write(isif->isif_cfg.base_addr, val, MISC);
/* Configure Gain & Offset */
isif_config_gain_offset(isif);
/* Configure Color pattern */
if (format->code == MEDIA_BUS_FMT_SGRBG12_1X12)
val = isif_sgrbg_pattern;
else
/* default set to rggb */
val = isif_srggb_pattern;
isif_write(isif->isif_cfg.base_addr, val, CCOLP);
/* Configure HSIZE register */
val = (params->horz_flip_en & ISIF_HSIZE_FLIP_MASK) <<
ISIF_HSIZE_FLIP_SHIFT;
/* calculate line offset in 32 bytes based on pack value */
if (isif->isif_cfg.data_pack == ISIF_PACK_8BIT)
val |= ((params->win.width + 31) >> 5) & ISIF_LINEOFST_MASK;
else if (isif->isif_cfg.data_pack == ISIF_PACK_12BIT)
val |= ((((params->win.width + (params->win.width >> 2)) +
31) >> 5) & ISIF_LINEOFST_MASK);
else
val |= (((params->win.width * 2) + 31) >> 5) &
ISIF_LINEOFST_MASK;
isif_write(isif->isif_cfg.base_addr, val, HSIZE);
/* Configure SDOFST register */
if (params->frm_fmt == ISIF_FRMFMT_INTERLACED) {
if (params->image_invert_en)
/* For interlace inverse mode */
isif_write(isif->isif_cfg.base_addr,
ISIF_INTERLACE_INVERSE_MODE, SDOFST);
else
/* For interlace non inverse mode */
isif_write(isif->isif_cfg.base_addr,
ISIF_INTERLACE_NON_INVERSE_MODE, SDOFST);
} else if (params->frm_fmt == ISIF_FRMFMT_PROGRESSIVE) {
if (params->image_invert_en)
isif_write(isif->isif_cfg.base_addr,
ISIF_PROGRESSIVE_INVERSE_MODE, SDOFST);
else
/* For progessive non inverse mode */
isif_write(isif->isif_cfg.base_addr,
ISIF_PROGRESSIVE_NON_INVERSE_MODE, SDOFST);
}
/* Configure video window */
isif_setwin(isif, &params->win, params->frm_fmt, 1, mode);
/* Configure Black Clamp */
isif_config_bclamp(isif, &module_params->bclamp);
/* Configure Vertical Defection Pixel Correction */
isif_config_dfc(isif, &module_params->dfc);
if (!module_params->df_csc.df_or_csc)
/* Configure Color Space Conversion */
isif_config_csc(isif, &module_params->df_csc);
isif_config_linearization(isif, &module_params->linearize);
/* Configure Culling */
isif_config_culling(isif, &module_params->culling);
/* Configure Horizontal and vertical offsets(DFC,LSC,Gain) */
val = module_params->horz_offset & ISIF_DATA_H_OFFSET_MASK;
isif_write(isif->isif_cfg.base_addr, val, DATAHOFST);
val = module_params->vert_offset & ISIF_DATA_V_OFFSET_MASK;
isif_write(isif->isif_cfg.base_addr, val, DATAVOFST);
return 0;
}
#define DM365_ISIF_HSIZE_MASK 0xffffffe0
#define DM365_ISIF_SDOFST_2_LINES 0x00000249
/* This function will configure ISIF for YCbCr parameters. */
static int isif_config_ycbcr(struct v4l2_subdev *sd, int mode)
{
struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
struct isif_ycbcr_config *params = &isif->isif_cfg.ycbcr;
struct v4l2_mbus_framefmt *format;
int pix_fmt;
u32 modeset;
u32 ccdcfg;
format = &isif->formats[ISIF_PAD_SINK];
/*
* first reset the ISIF
* all registers have default values after reset
* This is important since we assume default values to be set in
* a lot of registers that we didn't touch
*/
/* start with all bits zero */
ccdcfg = modeset = 0;
pix_fmt = isif_get_pix_fmt(format->code);
if (pix_fmt < 0) {
pr_debug("Invalid pix_fmt(input mode)\n");
return -EINVAL;
}
/* configure pixel format or input mode */
modeset = modeset | ((pix_fmt & ISIF_INPUT_MASK) <<
ISIF_INPUT_SHIFT) | ((params->frm_fmt & ISIF_FRM_FMT_MASK) <<
ISIF_FRM_FMT_SHIFT) | (((params->fid_pol &
ISIF_FID_POL_MASK) << ISIF_FID_POL_SHIFT)) |
(((params->hd_pol & ISIF_HD_POL_MASK) << ISIF_HD_POL_SHIFT)) |
(((params->vd_pol & ISIF_VD_POL_MASK) << ISIF_VD_POL_SHIFT));
/* pack the data to 8-bit CCDCCFG */
switch (format->code) {
case MEDIA_BUS_FMT_YUYV8_2X8:
case MEDIA_BUS_FMT_UYVY8_2X8:
if (pix_fmt != ISIF_PIXFMT_YCBCR_8BIT) {
pr_debug("Invalid pix_fmt(input mode)\n");
return -EINVAL;
}
modeset |= ((VPFE_PINPOL_NEGATIVE & ISIF_VD_POL_MASK) <<
ISIF_VD_POL_SHIFT);
isif_write(isif->isif_cfg.base_addr, 3, REC656IF);
ccdcfg = ccdcfg | ISIF_PACK_8BIT | ISIF_YCINSWP_YCBCR;
break;
case MEDIA_BUS_FMT_YUYV10_2X10:
if (pix_fmt != ISIF_PIXFMT_YCBCR_8BIT) {
pr_debug("Invalid pix_fmt(input mode)\n");
return -EINVAL;
}
/* setup BT.656, embedded sync */
isif_write(isif->isif_cfg.base_addr, 3, REC656IF);
/* enable 10 bit mode in ccdcfg */
ccdcfg = ccdcfg | ISIF_PACK_8BIT | ISIF_YCINSWP_YCBCR |
ISIF_BW656_ENABLE;
break;
case MEDIA_BUS_FMT_YUYV10_1X20:
if (pix_fmt != ISIF_PIXFMT_YCBCR_16BIT) {
pr_debug("Invalid pix_fmt(input mode)\n");
return -EINVAL;
}
isif_write(isif->isif_cfg.base_addr, 3, REC656IF);
break;
case MEDIA_BUS_FMT_Y8_1X8:
ccdcfg |= ISIF_PACK_8BIT;
ccdcfg |= ISIF_YCINSWP_YCBCR;
if (pix_fmt != ISIF_PIXFMT_YCBCR_8BIT) {
pr_debug("Invalid pix_fmt(input mode)\n");
return -EINVAL;
}
break;
case MEDIA_BUS_FMT_YUYV8_1X16:
if (pix_fmt != ISIF_PIXFMT_YCBCR_16BIT) {
pr_debug("Invalid pix_fmt(input mode)\n");
return -EINVAL;
}
break;
default:
/* should never come here */
pr_debug("Invalid interface type\n");
return -EINVAL;
}
isif_write(isif->isif_cfg.base_addr, modeset, MODESET);
/* Set up pix order */
ccdcfg |= (params->pix_order & ISIF_PIX_ORDER_MASK) <<
ISIF_PIX_ORDER_SHIFT;
isif_write(isif->isif_cfg.base_addr, ccdcfg, CCDCFG);
/* configure video window */
if (format->code == MEDIA_BUS_FMT_YUYV10_1X20 ||
format->code == MEDIA_BUS_FMT_YUYV8_1X16)
isif_setwin(isif, &params->win, params->frm_fmt, 1, mode);
else
isif_setwin(isif, &params->win, params->frm_fmt, 2, mode);
/*
* configure the horizontal line offset
* this is done by rounding up width to a multiple of 16 pixels
* and multiply by two to account for y:cb:cr 4:2:2 data
*/
isif_write(isif->isif_cfg.base_addr,
((((params->win.width * 2) + 31) &
DM365_ISIF_HSIZE_MASK) >> 5), HSIZE);
/* configure the memory line offset */
if (params->frm_fmt == ISIF_FRMFMT_INTERLACED &&
params->buf_type == ISIF_BUFTYPE_FLD_INTERLEAVED)
/* two fields are interleaved in memory */
isif_write(isif->isif_cfg.base_addr,
DM365_ISIF_SDOFST_2_LINES, SDOFST);
return 0;
}
static int isif_configure(struct v4l2_subdev *sd, int mode)
{
struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
struct v4l2_mbus_framefmt *format;
format = &isif->formats[ISIF_PAD_SINK];
switch (format->code) {
case MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8:
case MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8:
case MEDIA_BUS_FMT_SGRBG12_1X12:
return isif_config_raw(sd, mode);
case MEDIA_BUS_FMT_YUYV8_2X8:
case MEDIA_BUS_FMT_UYVY8_2X8:
case MEDIA_BUS_FMT_YUYV10_2X10:
case MEDIA_BUS_FMT_Y8_1X8:
case MEDIA_BUS_FMT_YUYV8_1X16:
case MEDIA_BUS_FMT_YUYV10_1X20:
return isif_config_ycbcr(sd, mode);
default:
break;
}
return -EINVAL;
}
/*
* isif_set_stream() - Enable/Disable streaming on the ISIF module
* @sd: VPFE ISIF V4L2 subdevice
* @enable: Enable/disable stream
*/
static int isif_set_stream(struct v4l2_subdev *sd, int enable)
{
struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
int ret;
if (enable) {
ret = isif_configure(sd,
(isif->output == ISIF_OUTPUT_MEMORY) ? 0 : 1);
if (ret)
return ret;
if (isif->output == ISIF_OUTPUT_MEMORY)
isif_enable_output_to_sdram(isif, 1);
isif_enable(isif, 1);
} else {
isif_enable(isif, 0);
isif_enable_output_to_sdram(isif, 0);
}
return 0;
}
/*
* __isif_get_format() - helper function for getting isif format
* @isif: pointer to isif private structure.
* @pad: pad number.
* @cfg: V4L2 subdev pad config
* @which: wanted subdev format.
*/
static struct v4l2_mbus_framefmt *
__isif_get_format(struct vpfe_isif_device *isif, struct v4l2_subdev_pad_config *cfg,
unsigned int pad, enum v4l2_subdev_format_whence which)
{
if (which == V4L2_SUBDEV_FORMAT_TRY) {
struct v4l2_subdev_format fmt;
fmt.pad = pad;
fmt.which = which;
return v4l2_subdev_get_try_format(&isif->subdev, cfg, pad);
}
return &isif->formats[pad];
}
/*
* isif_set_format() - set format on pad
* @sd : VPFE ISIF device
* @cfg : V4L2 subdev pad config
* @fmt : pointer to v4l2 subdev format structure
*
* Return 0 on success or -EINVAL if format or pad is invalid
*/
static int
isif_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
struct vpfe_device *vpfe_dev = to_vpfe_device(isif);
struct v4l2_mbus_framefmt *format;
format = __isif_get_format(isif, cfg, fmt->pad, fmt->which);
if (format == NULL)
return -EINVAL;
isif_try_format(isif, cfg, fmt);
memcpy(format, &fmt->format, sizeof(*format));
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
return 0;
if (fmt->pad == ISIF_PAD_SOURCE)
return isif_config_format(vpfe_dev, fmt->pad);
return 0;
}
/*
* isif_get_format() - Retrieve the video format on a pad
* @sd: VPFE ISIF V4L2 subdevice
* @cfg: V4L2 subdev pad config
* @fmt: pointer to v4l2 subdev format structure
*
* Return 0 on success or -EINVAL if the pad is invalid or doesn't correspond
* to the format type.
*/
static int
isif_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
struct vpfe_isif_device *vpfe_isif = v4l2_get_subdevdata(sd);
struct v4l2_mbus_framefmt *format;
format = __isif_get_format(vpfe_isif, cfg, fmt->pad, fmt->which);
if (format == NULL)
return -EINVAL;
memcpy(&fmt->format, format, sizeof(fmt->format));
return 0;
}
/*
* isif_enum_frame_size() - enum frame sizes on pads
* @sd: VPFE isif V4L2 subdevice
* @cfg: V4L2 subdev pad config
* @code: pointer to v4l2_subdev_frame_size_enum structure
*/
static int
isif_enum_frame_size(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_frame_size_enum *fse)
{
struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
struct v4l2_subdev_format format;
if (fse->index != 0)
return -EINVAL;
format.pad = fse->pad;
format.format.code = fse->code;
format.format.width = 1;
format.format.height = 1;
format.which = fse->which;
isif_try_format(isif, cfg, &format);
fse->min_width = format.format.width;
fse->min_height = format.format.height;
if (format.format.code != fse->code)
return -EINVAL;
format.pad = fse->pad;
format.format.code = fse->code;
format.format.width = -1;
format.format.height = -1;
format.which = fse->which;
isif_try_format(isif, cfg, &format);
fse->max_width = format.format.width;
fse->max_height = format.format.height;
return 0;
}
/*
* isif_enum_mbus_code() - enum mbus codes for pads
* @sd: VPFE isif V4L2 subdevice
* @cfg: V4L2 subdev pad config
* @code: pointer to v4l2_subdev_mbus_code_enum structure
*/
static int
isif_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_mbus_code_enum *code)
{
switch (code->pad) {
case ISIF_PAD_SINK:
case ISIF_PAD_SOURCE:
if (code->index >= ARRAY_SIZE(isif_fmts))
return -EINVAL;
code->code = isif_fmts[code->index];
break;
default:
return -EINVAL;
}
return 0;
}
/*
* isif_pad_set_selection() - set crop rectangle on pad
* @sd: VPFE isif V4L2 subdevice
* @cfg: V4L2 subdev pad config
* @code: pointer to v4l2_subdev_mbus_code_enum structure
*
* Return 0 on success, -EINVAL if pad is invalid
*/
static int
isif_pad_set_selection(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_selection *sel)
{
struct vpfe_isif_device *vpfe_isif = v4l2_get_subdevdata(sd);
struct v4l2_mbus_framefmt *format;
/* check whether it's a valid pad and target */
if (sel->pad != ISIF_PAD_SINK || sel->target != V4L2_SEL_TGT_CROP)
return -EINVAL;
format = __isif_get_format(vpfe_isif, cfg, sel->pad, sel->which);
if (format == NULL)
return -EINVAL;
/* check wether crop rect is within limits */
if (sel->r.top < 0 || sel->r.left < 0 ||
(sel->r.left + sel->r.width >
vpfe_isif->formats[ISIF_PAD_SINK].width) ||
(sel->r.top + sel->r.height >
vpfe_isif->formats[ISIF_PAD_SINK].height)) {
sel->r.left = 0;
sel->r.top = 0;
sel->r.width = format->width;
sel->r.height = format->height;
}
/* adjust the width to 16 pixel boundary */
sel->r.width = ((sel->r.width + 15) & ~0xf);
vpfe_isif->crop = sel->r;
if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
isif_set_image_window(vpfe_isif);
} else {
struct v4l2_rect *rect;
rect = v4l2_subdev_get_try_crop(sd, cfg, ISIF_PAD_SINK);
memcpy(rect, &vpfe_isif->crop, sizeof(*rect));
}
return 0;
}
/*
* isif_pad_get_selection() - get crop rectangle on pad
* @sd: VPFE isif V4L2 subdevice
* @cfg: V4L2 subdev pad config
* @code: pointer to v4l2_subdev_mbus_code_enum structure
*
* Return 0 on success, -EINVAL if pad is invalid
*/
static int
isif_pad_get_selection(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_selection *sel)
{
struct vpfe_isif_device *vpfe_isif = v4l2_get_subdevdata(sd);
/* check whether it's a valid pad and target */
if (sel->pad != ISIF_PAD_SINK || sel->target != V4L2_SEL_TGT_CROP)
return -EINVAL;
if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
struct v4l2_rect *rect;
rect = v4l2_subdev_get_try_crop(sd, cfg, ISIF_PAD_SINK);
memcpy(&sel->r, rect, sizeof(*rect));
} else {
sel->r = vpfe_isif->crop;
}
return 0;
}
/*
* isif_init_formats() - Initialize formats on all pads
* @sd: VPFE isif V4L2 subdevice
* @fh: V4L2 subdev file handle
*
* Initialize all pad formats with default values. Try formats are initialized
* on the file handle.
*/
static int
isif_init_formats(struct v4l2_subdev *sd,
struct v4l2_subdev_fh *fh)
{
struct v4l2_subdev_format format;
struct v4l2_subdev_selection sel;
memset(&format, 0, sizeof(format));
format.pad = ISIF_PAD_SINK;
format.which = V4L2_SUBDEV_FORMAT_TRY;
format.format.code = MEDIA_BUS_FMT_SGRBG12_1X12;
format.format.width = MAX_WIDTH;
format.format.height = MAX_HEIGHT;
isif_set_format(sd, fh->pad, &format);
memset(&format, 0, sizeof(format));
format.pad = ISIF_PAD_SOURCE;
format.which = V4L2_SUBDEV_FORMAT_TRY;
format.format.code = MEDIA_BUS_FMT_SGRBG12_1X12;
format.format.width = MAX_WIDTH;
format.format.height = MAX_HEIGHT;
isif_set_format(sd, fh->pad, &format);
memset(&sel, 0, sizeof(sel));
sel.pad = ISIF_PAD_SINK;
sel.which = V4L2_SUBDEV_FORMAT_TRY;
sel.target = V4L2_SEL_TGT_CROP;
sel.r.width = MAX_WIDTH;
sel.r.height = MAX_HEIGHT;
isif_pad_set_selection(sd, fh->pad, &sel);
return 0;
}
/* subdev core operations */
static const struct v4l2_subdev_core_ops isif_v4l2_core_ops = {
.ioctl = isif_ioctl,
};
/* subdev file operations */
static const struct v4l2_subdev_internal_ops isif_v4l2_internal_ops = {
.open = isif_init_formats,
};
/* subdev video operations */
static const struct v4l2_subdev_video_ops isif_v4l2_video_ops = {
.s_stream = isif_set_stream,
};
/* subdev pad operations */
static const struct v4l2_subdev_pad_ops isif_v4l2_pad_ops = {
.enum_mbus_code = isif_enum_mbus_code,
.enum_frame_size = isif_enum_frame_size,
.get_fmt = isif_get_format,
.set_fmt = isif_set_format,
.set_selection = isif_pad_set_selection,
.get_selection = isif_pad_get_selection,
};
/* subdev operations */
static const struct v4l2_subdev_ops isif_v4l2_ops = {
.core = &isif_v4l2_core_ops,
.video = &isif_v4l2_video_ops,
.pad = &isif_v4l2_pad_ops,
};
/*
* Media entity operations
*/
/*
* isif_link_setup() - Setup isif connections
* @entity: isif media entity
* @local: Pad at the local end of the link
* @remote: Pad at the remote end of the link
* @flags: Link flags
*
* return -EINVAL or zero on success
*/
static int
isif_link_setup(struct media_entity *entity, const struct media_pad *local,
const struct media_pad *remote, u32 flags)
{
struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
switch (local->index | media_entity_type(remote->entity)) {
case ISIF_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV:
/* read from decoder/sensor */
if (!(flags & MEDIA_LNK_FL_ENABLED)) {
isif->input = ISIF_INPUT_NONE;
break;
}
if (isif->input != ISIF_INPUT_NONE)
return -EBUSY;
isif->input = ISIF_INPUT_PARALLEL;
break;
case ISIF_PAD_SOURCE | MEDIA_ENT_T_DEVNODE:
/* write to memory */
if (flags & MEDIA_LNK_FL_ENABLED)
isif->output = ISIF_OUTPUT_MEMORY;
else
isif->output = ISIF_OUTPUT_NONE;
break;
case ISIF_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV:
if (flags & MEDIA_LNK_FL_ENABLED)
isif->output = ISIF_OUTPUT_IPIPEIF;
else
isif->output = ISIF_OUTPUT_NONE;
break;
default:
return -EINVAL;
}
return 0;
}
static const struct media_entity_operations isif_media_ops = {
.link_setup = isif_link_setup,
};
/*
* vpfe_isif_unregister_entities() - isif unregister entity
* @isif - pointer to isif subdevice structure.
*/
void vpfe_isif_unregister_entities(struct vpfe_isif_device *isif)
{
vpfe_video_unregister(&isif->video_out);
/* unregister subdev */
v4l2_device_unregister_subdev(&isif->subdev);
/* cleanup entity */
media_entity_cleanup(&isif->subdev.entity);
}
static void isif_restore_defaults(struct vpfe_isif_device *isif)
{
enum vpss_ccdc_source_sel source = VPSS_CCDCIN;
int i;
memset(&isif->isif_cfg.bayer.config_params, 0,
sizeof(struct vpfe_isif_raw_config));
isif->isif_cfg.bayer.config_params.linearize.corr_shft =
VPFE_ISIF_NO_SHIFT;
isif->isif_cfg.bayer.config_params.linearize.scale_fact.integer = 1;
isif->isif_cfg.bayer.config_params.culling.hcpat_odd =
ISIF_CULLING_HCAPT_ODD;
isif->isif_cfg.bayer.config_params.culling.hcpat_even =
ISIF_CULLING_HCAPT_EVEN;
isif->isif_cfg.bayer.config_params.culling.vcpat = ISIF_CULLING_VCAPT;
/* Enable clock to ISIF, IPIPEIF and BL */
vpss_enable_clock(VPSS_CCDC_CLOCK, 1);
vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1);
vpss_enable_clock(VPSS_BL_CLOCK, 1);
/* set all registers to default value */
for (i = 0; i <= 0x1f8; i += 4)
isif_write(isif->isif_cfg.base_addr, 0, i);
/* no culling support */
isif_write(isif->isif_cfg.base_addr, 0xffff, CULH);
isif_write(isif->isif_cfg.base_addr, 0xff, CULV);
/* Set default offset and gain */
isif_config_gain_offset(isif);
vpss_select_ccdc_source(source);
}
/*
* vpfe_isif_register_entities() - isif register entity
* @isif - pointer to isif subdevice structure.
* @vdev: pointer to v4l2 device structure.
*/
int vpfe_isif_register_entities(struct vpfe_isif_device *isif,
struct v4l2_device *vdev)
{
struct vpfe_device *vpfe_dev = to_vpfe_device(isif);
unsigned int flags;
int ret;
/* Register the subdev */
ret = v4l2_device_register_subdev(vdev, &isif->subdev);
if (ret < 0)
return ret;
isif_restore_defaults(isif);
ret = vpfe_video_register(&isif->video_out, vdev);
if (ret) {
pr_err("Failed to register isif video out device\n");
goto out_video_register;
}
isif->video_out.vpfe_dev = vpfe_dev;
flags = 0;
/* connect isif to video node */
ret = media_entity_create_link(&isif->subdev.entity, 1,
&isif->video_out.video_dev.entity,
0, flags);
if (ret < 0)
goto out_create_link;
return 0;
out_create_link:
vpfe_video_unregister(&isif->video_out);
out_video_register:
v4l2_device_unregister_subdev(&isif->subdev);
return ret;
}
/* -------------------------------------------------------------------
* V4L2 subdev control operations
*/
static int vpfe_isif_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct vpfe_isif_device *isif =
container_of(ctrl->handler, struct vpfe_isif_device, ctrls);
struct isif_oper_config *config = &isif->isif_cfg;
switch (ctrl->id) {
case VPFE_CID_DPCM_PREDICTOR:
config->bayer.dpcm_predictor = ctrl->val;
break;
case VPFE_ISIF_CID_CRGAIN:
config->isif_gain_params.cr_gain = ctrl->val;
break;
case VPFE_ISIF_CID_CGRGAIN:
config->isif_gain_params.cgr_gain = ctrl->val;
break;
case VPFE_ISIF_CID_CGBGAIN:
config->isif_gain_params.cgb_gain = ctrl->val;
break;
case VPFE_ISIF_CID_CBGAIN:
config->isif_gain_params.cb_gain = ctrl->val;
break;
case VPFE_ISIF_CID_GAIN_OFFSET:
config->isif_gain_params.offset = ctrl->val;
break;
default:
return -EINVAL;
}
return 0;
}
static const struct v4l2_ctrl_ops vpfe_isif_ctrl_ops = {
.s_ctrl = vpfe_isif_s_ctrl,
};
static const struct v4l2_ctrl_config vpfe_isif_dpcm_pred = {
.ops = &vpfe_isif_ctrl_ops,
.id = VPFE_CID_DPCM_PREDICTOR,
.name = "DPCM Predictor",
.type = V4L2_CTRL_TYPE_INTEGER,
.min = 0,
.max = 1,
.step = 1,
.def = 0,
};
static const struct v4l2_ctrl_config vpfe_isif_crgain = {
.ops = &vpfe_isif_ctrl_ops,
.id = VPFE_ISIF_CID_CRGAIN,
.name = "CRGAIN",
.type = V4L2_CTRL_TYPE_INTEGER,
.min = 0,
.max = (1 << 12) - 1,
.step = 1,
.def = 0,
};
static const struct v4l2_ctrl_config vpfe_isif_cgrgain = {
.ops = &vpfe_isif_ctrl_ops,
.id = VPFE_ISIF_CID_CGRGAIN,
.name = "CGRGAIN",
.type = V4L2_CTRL_TYPE_INTEGER,
.min = 0,
.max = (1 << 12) - 1,
.step = 1,
.def = 0,
};
static const struct v4l2_ctrl_config vpfe_isif_cgbgain = {
.ops = &vpfe_isif_ctrl_ops,
.id = VPFE_ISIF_CID_CGBGAIN,
.name = "CGBGAIN",
.type = V4L2_CTRL_TYPE_INTEGER,
.min = 0,
.max = (1 << 12) - 1,
.step = 1,
.def = 0,
};
static const struct v4l2_ctrl_config vpfe_isif_cbgain = {
.ops = &vpfe_isif_ctrl_ops,
.id = VPFE_ISIF_CID_CBGAIN,
.name = "CBGAIN",
.type = V4L2_CTRL_TYPE_INTEGER,
.min = 0,
.max = (1 << 12) - 1,
.step = 1,
.def = 0,
};
static const struct v4l2_ctrl_config vpfe_isif_gain_offset = {
.ops = &vpfe_isif_ctrl_ops,
.id = VPFE_ISIF_CID_GAIN_OFFSET,
.name = "Gain Offset",
.type = V4L2_CTRL_TYPE_INTEGER,
.min = 0,
.max = (1 << 12) - 1,
.step = 1,
.def = 0,
};
static void isif_remove(struct vpfe_isif_device *isif,
struct platform_device *pdev)
{
struct resource *res;
int i = 0;
iounmap(isif->isif_cfg.base_addr);
iounmap(isif->isif_cfg.linear_tbl0_addr);
iounmap(isif->isif_cfg.linear_tbl1_addr);
while (i < 3) {
res = platform_get_resource(pdev, IORESOURCE_MEM, i);
if (res)
release_mem_region(res->start,
resource_size(res));
i++;
}
}
static void isif_config_defaults(struct vpfe_isif_device *isif)
{
isif->isif_cfg.ycbcr.v4l2_pix_fmt = V4L2_PIX_FMT_UYVY;
isif->isif_cfg.ycbcr.pix_fmt = ISIF_PIXFMT_YCBCR_8BIT;
isif->isif_cfg.ycbcr.frm_fmt = ISIF_FRMFMT_INTERLACED;
isif->isif_cfg.ycbcr.fid_pol = VPFE_PINPOL_POSITIVE;
isif->isif_cfg.ycbcr.vd_pol = VPFE_PINPOL_POSITIVE;
isif->isif_cfg.ycbcr.hd_pol = VPFE_PINPOL_POSITIVE;
isif->isif_cfg.ycbcr.pix_order = ISIF_PIXORDER_CBYCRY;
isif->isif_cfg.ycbcr.buf_type = ISIF_BUFTYPE_FLD_INTERLEAVED;
isif->isif_cfg.bayer.v4l2_pix_fmt = V4L2_PIX_FMT_SGRBG10ALAW8;
isif->isif_cfg.bayer.pix_fmt = ISIF_PIXFMT_RAW;
isif->isif_cfg.bayer.frm_fmt = ISIF_FRMFMT_PROGRESSIVE;
isif->isif_cfg.bayer.fid_pol = VPFE_PINPOL_POSITIVE;
isif->isif_cfg.bayer.vd_pol = VPFE_PINPOL_POSITIVE;
isif->isif_cfg.bayer.hd_pol = VPFE_PINPOL_POSITIVE;
isif->isif_cfg.bayer.cfa_pat = ISIF_CFA_PAT_MOSAIC;
isif->isif_cfg.bayer.data_msb = ISIF_BIT_MSB_11;
isif->isif_cfg.data_pack = ISIF_PACK_8BIT;
}
/*
* vpfe_isif_init() - Initialize V4L2 subdev and media entity
* @isif: VPFE isif module
* @pdev: Pointer to platform device structure.
* Return 0 on success and a negative error code on failure.
*/
int vpfe_isif_init(struct vpfe_isif_device *isif, struct platform_device *pdev)
{
struct v4l2_subdev *sd = &isif->subdev;
struct media_pad *pads = &isif->pads[0];
struct media_entity *me = &sd->entity;
static resource_size_t res_len;
struct resource *res;
void __iomem *addr;
int status;
int i = 0;
/* Get the ISIF base address, linearization table0 and table1 addr. */
while (i < 3) {
res = platform_get_resource(pdev, IORESOURCE_MEM, i);
if (!res) {
status = -ENOENT;
goto fail_nobase_res;
}
res_len = resource_size(res);
res = request_mem_region(res->start, res_len, res->name);
if (!res) {
status = -EBUSY;
goto fail_nobase_res;
}
addr = ioremap_nocache(res->start, res_len);
if (!addr) {
status = -EBUSY;
goto fail_base_iomap;
}
switch (i) {
case 0:
/* ISIF base address */
isif->isif_cfg.base_addr = addr;
break;
case 1:
/* ISIF linear tbl0 address */
isif->isif_cfg.linear_tbl0_addr = addr;
break;
default:
/* ISIF linear tbl0 address */
isif->isif_cfg.linear_tbl1_addr = addr;
break;
}
i++;
}
davinci_cfg_reg(DM365_VIN_CAM_WEN);
davinci_cfg_reg(DM365_VIN_CAM_VD);
davinci_cfg_reg(DM365_VIN_CAM_HD);
davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
/* queue ops */
isif->video_out.ops = &isif_video_ops;
v4l2_subdev_init(sd, &isif_v4l2_ops);
sd->internal_ops = &isif_v4l2_internal_ops;
strlcpy(sd->name, "DAVINCI ISIF", sizeof(sd->name));
sd->grp_id = 1 << 16; /* group ID for davinci subdevs */
v4l2_set_subdevdata(sd, isif);
sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
pads[ISIF_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
pads[ISIF_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
isif->input = ISIF_INPUT_NONE;
isif->output = ISIF_OUTPUT_NONE;
me->ops = &isif_media_ops;
status = media_entity_init(me, ISIF_PADS_NUM, pads, 0);
if (status)
goto isif_fail;
isif->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
status = vpfe_video_init(&isif->video_out, "ISIF");
if (status) {
pr_err("Failed to init isif-out video device\n");
goto isif_fail;
}
v4l2_ctrl_handler_init(&isif->ctrls, 6);
v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_crgain, NULL);
v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_cgrgain, NULL);
v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_cgbgain, NULL);
v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_cbgain, NULL);
v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_gain_offset, NULL);
v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_dpcm_pred, NULL);
v4l2_ctrl_handler_setup(&isif->ctrls);
sd->ctrl_handler = &isif->ctrls;
isif_config_defaults(isif);
return 0;
fail_base_iomap:
release_mem_region(res->start, res_len);
i--;
fail_nobase_res:
if (isif->isif_cfg.base_addr)
iounmap(isif->isif_cfg.base_addr);
if (isif->isif_cfg.linear_tbl0_addr)
iounmap(isif->isif_cfg.linear_tbl0_addr);
while (i >= 0) {
res = platform_get_resource(pdev, IORESOURCE_MEM, i);
release_mem_region(res->start, res_len);
i--;
}
return status;
isif_fail:
v4l2_ctrl_handler_free(&isif->ctrls);
isif_remove(isif, pdev);
return status;
}
/*
* vpfe_isif_cleanup - isif module cleanup
* @isif: pointer to isif subdevice
* @dev: pointer to platform device structure
*/
void
vpfe_isif_cleanup(struct vpfe_isif_device *isif, struct platform_device *pdev)
{
isif_remove(isif, pdev);
}