
#
# This file implements the support for external toolchains, i.e
# toolchains that have not been produced by Buildroot itself and that
# Buildroot can download from the Web or that are already available on
# the system on which Buildroot runs. So far, we have tested this
# with:
#
#  * Toolchains generated by Crosstool-NG
#  * Toolchains generated by Buildroot
#  * ARM, MIPS and PowerPC toolchains made available by
#    Codesourcery. For the MIPS toolchain, the -muclibc variant isn't
#    supported yet, only the default glibc-based variant is.
#
# The basic principle is the following
#
#  1. a. For toolchains downloaded from the Web, Buildroot already
#  knows their configuration, so it just downloads them and extract
#  them in $(TOOLCHAIN_EXTERNAL_DIR).
#
#  1. b. For pre-installed toolchains, perform some checks on the
#  conformity between the toolchain configuration described in the
#  Buildroot menuconfig system, and the real configuration of the
#  external toolchain. This is for example important to make sure that
#  the Buildroot configuration system knows whether the toolchain
#  supports RPC, IPv6, locales, large files, etc. Unfortunately, these
#  things cannot be detected automatically, since the value of these
#  options (such as BR2_INET_RPC) are needed at configuration time
#  because these options are used as dependencies for other
#  options. And at configuration time, we are not able to retrieve the
#  external toolchain configuration.
#
#  2. Copy the libraries needed at runtime to the target directory,
#  $(TARGET_DIR). Obviously, things such as the C library, the dynamic
#  loader and a few other utility libraries are needed if dynamic
#  applications are to be executed on the target system.
#
#  3. Copy the libraries and headers to the staging directory. This
#  will allow all further calls to gcc to be made using --sysroot
#  $(STAGING_DIR), which greatly simplifies the compilation of the
#  packages when using external toolchains. So in the end, only the
#  cross-compiler binaries remains external, all libraries and headers
#  are imported into the Buildroot tree.
#
#  4. Build a toolchain wrapper which executes the external toolchain
#  with a number of arguments (sysroot/march/mtune/..) hardcoded,
#  so we're sure the correct configuration is always used and the
#  toolchain behaves similar to an internal toolchain.
#  This toolchain wrapper and symlinks are installed into
#  $(HOST_DIR)/usr/bin like for the internal toolchains, and the rest
#  of Buildroot is handled identical for the 2 toolchain types.

LIB_EXTERNAL_LIBS=ld*.so libc.so libcrypt.so libdl.so libgcc_s.so libm.so libnsl.so libresolv.so librt.so libutil.so libatomic.so
LIB_EXTERNAL_LIBS+=$(call qstrip,$(BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS))
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC),y)
LIB_EXTERNAL_LIBS+=libnss_files.so libnss_dns.so
endif

ifeq ($(BR2_INSTALL_LIBSTDCPP),y)
USR_LIB_EXTERNAL_LIBS+=libstdc++.so
endif

ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
LIB_EXTERNAL_LIBS+=libpthread.so
LIB_EXTERNAL_LIBS+=libthread_db.so
endif # ! no threads

# Details about sysroot directory selection.
#
# To find the sysroot directory:
#
#  * We first try the -print-sysroot option, available in gcc 4.4.x
#    and in some Codesourcery toolchains.
#
#  * If this option is not available, we fallback to the value of
#    --with-sysroot as visible in CROSS-gcc -v.
#
# When doing those tests, we don't pass any option to gcc that could
# select a multilib variant (such as -march) as we want the "main"
# sysroot, which contains all variants of the C library in the case of
# multilib toolchains. We use the TARGET_CC_NO_SYSROOT variable, which
# is the path of the cross-compiler, without the
# --sysroot=$(STAGING_DIR), since what we want to find is the location
# of the original toolchain sysroot. This "main" sysroot directory is
# stored in SYSROOT_DIR.
#
# Then, multilib toolchains are a little bit more complicated, since
# they in fact have multiple sysroots, one for each variant supported
# by the toolchain. So we need to find the particular sysroot we're
# interested in.
#
# To do so, we ask the compiler where its sysroot is by passing all
# flags (including -march and al.), except the --sysroot flag since we
# want to the compiler to tell us where its original sysroot
# is. ARCH_SUBDIR will contain the subdirectory, in the main
# SYSROOT_DIR, that corresponds to the selected architecture
# variant. ARCH_SYSROOT_DIR will contain the full path to this
# location.
#
# One might wonder why we don't just bother with ARCH_SYSROOT_DIR. The
# fact is that in multilib toolchains, the header files are often only
# present in the main sysroot, and only the libraries are available in
# each variant-specific sysroot directory.


TOOLCHAIN_EXTERNAL_PREFIX=$(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PREFIX))
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y)
TOOLCHAIN_EXTERNAL_DIR=$(HOST_DIR)/opt/ext-toolchain
else
TOOLCHAIN_EXTERNAL_DIR=$(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PATH))
endif

ifeq ($(TOOLCHAIN_EXTERNAL_DIR),)
# if no path set, figure it out from path
TOOLCHAIN_EXTERNAL_BIN:=$(shell dirname $(shell which $(TOOLCHAIN_EXTERNAL_PREFIX)-gcc))
else
TOOLCHAIN_EXTERNAL_BIN:=$(TOOLCHAIN_EXTERNAL_DIR)/bin
endif

TOOLCHAIN_EXTERNAL_CROSS=$(TOOLCHAIN_EXTERNAL_BIN)/$(TOOLCHAIN_EXTERNAL_PREFIX)-
TOOLCHAIN_EXTERNAL_CC=$(TOOLCHAIN_EXTERNAL_CROSS)gcc
TOOLCHAIN_EXTERNAL_CXX=$(TOOLCHAIN_EXTERNAL_CROSS)g++
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS = \
	-DBR_CROSS_PATH='"$(TOOLCHAIN_EXTERNAL_BIN)/"' \
	-DBR_SYSROOT='"$(STAGING_DIR)"'

CC_TARGET_TUNE_:=$(call qstrip,$(BR2_GCC_TARGET_TUNE))
CC_TARGET_CPU_:=$(call qstrip,$(BR2_GCC_TARGET_CPU))
CC_TARGET_ARCH_:=$(call qstrip,$(BR2_GCC_TARGET_ARCH))
CC_TARGET_ABI_:=$(call qstrip,$(BR2_GCC_TARGET_ABI))

# march/mtune/floating point mode needs to be passed to the external toolchain
# to select the right multilib variant
ifneq ($(CC_TARGET_TUNE_),)
TOOLCHAIN_EXTERNAL_CFLAGS += -mtune=$(CC_TARGET_TUNE_)
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_TUNE='"$(CC_TARGET_TUNE_)"'
endif
ifneq ($(CC_TARGET_ARCH_),)
TOOLCHAIN_EXTERNAL_CFLAGS += -march=$(CC_TARGET_ARCH_)
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ARCH='"$(CC_TARGET_ARCH_)"'
endif
ifneq ($(CC_TARGET_CPU_),)
TOOLCHAIN_EXTERNAL_CFLAGS += -mcpu=$(CC_TARGET_CPU_)
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_CPU='"$(CC_TARGET_CPU_)"'
endif
ifneq ($(CC_TARGET_ABI_),)
TOOLCHAIN_EXTERNAL_CFLAGS += -mabi=$(CC_TARGET_ABI_)
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ABI='"$(CC_TARGET_ABI_)"'
endif

ifeq ($(BR2_SOFT_FLOAT),y)
TOOLCHAIN_EXTERNAL_CFLAGS += -msoft-float
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_SOFTFLOAT=1
endif

ifeq ($(BR2_VFP_FLOAT),y)
TOOLCHAIN_EXTERNAL_CFLAGS += -mfpu=vfp
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_VFPFLOAT=1
endif

ifeq ($(BR2_CCACHE),y)
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_CCACHE='"$(CCACHE)"'
endif

ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y)
TOOLCHAIN_EXTERNAL_DEPENDENCIES = $(TOOLCHAIN_EXTERNAL_DIR)/.extracted
else
TOOLCHAIN_EXTERNAL_DEPENDENCIES = $(STAMP_DIR)/ext-toolchain-checked
endif

ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2009Q1),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/arm/portal/package4571/public/arm-none-linux-gnueabi/
TOOLCHAIN_EXTERNAL_SOURCE=arm-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2009Q3),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/arm/portal/package5383/public/arm-none-linux-gnueabi/
TOOLCHAIN_EXTERNAL_SOURCE=arm-2009q3-67-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2010Q1),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/arm/portal/package6488/public/arm-none-linux-gnueabi/
TOOLCHAIN_EXTERNAL_SOURCE=arm-2010q1-202-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201009),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/arm/portal/package7851/public/arm-none-linux-gnueabi/
TOOLCHAIN_EXTERNAL_SOURCE=arm-2010.09-50-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201103),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/arm/portal/package8739/public/arm-none-linux-gnueabi/
TOOLCHAIN_EXTERNAL_SOURCE=arm-2011.03-41-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package7401/public/mips-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE=mips-4.4-303-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package9055/public/mips-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE=mips-2011.03-93-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/power/portal/package7703/public/powerpc-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE=freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package7783/public/sh-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-45-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y)
TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/sgpp/lite/superh/portal/package8759/public/sh-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package7859/public/sh-uclinux/
TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package8749/public/sh-uclinux/
TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-36-sh-uclinux-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201009),y)
TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/sgpp/lite/ia32/portal/package7682/public/i686-pc-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE=ia32-2010.09-44-i686-pc-linux-gnu-i386-linux.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1),y)
TOOLCHAIN_EXTERNAL_SITE_1   = http://blackfin.uclinux.org/gf/download/frsrelease/501/8378/
TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2010R1-RC4.i386.tar.bz2
TOOLCHAIN_EXTERNAL_SITE_2   = http://blackfin.uclinux.org/gf/download/frsrelease/501/8386/
TOOLCHAIN_EXTERNAL_SOURCE_2 = blackfin-toolchain-uclibc-full-2010R1-RC4.i386.tar.bz2
TOOLCHAIN_EXTERNAL_SOURCE   = $(TOOLCHAIN_EXTERNAL_SOURCE_1) $(TOOLCHAIN_EXTERNAL_SOURCE_2)
else
# A value must be set (even if unused), otherwise the
# $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) rule would override the main
# $(DL_DIR) rule
TOOLCHAIN_EXTERNAL_SOURCE=none
endif

# Special handling for Blackfin toolchain, because of the split in two
# tarballs, and the organization of tarball contents. The tarballs
# contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,
# which themselves contain the toolchain. This is why we strip more
# components than usual.
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1),y)
$(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_1):
	$(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE_1),$(TOOLCHAIN_EXTERNAL_SOURCE_1))

$(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_2):
	$(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE_2),$(TOOLCHAIN_EXTERNAL_SOURCE_2))

$(TOOLCHAIN_EXTERNAL_DIR)/.extracted: $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_1) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_2)
	mkdir -p $(@D)
	$(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE_1))) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_1) | \
		$(TAR) $(TAR_STRIP_COMPONENTS)=3 --hard-dereference -C $(@D) $(TAR_OPTIONS) -
	$(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE_2))) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_2) | \
		$(TAR) $(TAR_STRIP_COMPONENTS)=3 --hard-dereference -C $(@D) $(TAR_OPTIONS) -
ifeq ($(TOOLCHAIN_EXTERNAL_PREFIX),bfin-uclinux)
	rm -rf $(TOOLCHAIN_EXTERNAL_DIR)/bfin-linux-uclibc
	mv $(TOOLCHAIN_EXTERNAL_DIR)/bfin-uclinux $(TOOLCHAIN_EXTERNAL_DIR)/tmp
	mv $(TOOLCHAIN_EXTERNAL_DIR)/tmp/* $(TOOLCHAIN_EXTERNAL_DIR)/
	rmdir $(TOOLCHAIN_EXTERNAL_DIR)/tmp
else
	rm -rf $(TOOLCHAIN_EXTERNAL_DIR)/bfin-uclinux
	mv $(TOOLCHAIN_EXTERNAL_DIR)/bfin-linux-uclibc $(TOOLCHAIN_EXTERNAL_DIR)/tmp
	mv $(TOOLCHAIN_EXTERNAL_DIR)/tmp/* $(TOOLCHAIN_EXTERNAL_DIR)/
	rmdir $(TOOLCHAIN_EXTERNAL_DIR)/tmp
endif
	$(Q)touch $@
else
# Download and extraction of a toolchain
$(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE):
	$(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE),$(TOOLCHAIN_EXTERNAL_SOURCE))

$(TOOLCHAIN_EXTERNAL_DIR)/.extracted: $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE)
	mkdir -p $(@D)
	$(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE))) $^ | \
		$(TAR) $(TAR_STRIP_COMPONENTS)=1 --exclude='usr/lib/locale/*' -C $(@D) $(TAR_OPTIONS) -
	$(Q)touch $@
endif

# Checks for an already installed toolchain: check the toolchain
# location, check that it supports sysroot, and then verify that it
# matches the configuration provided in Buildroot: ABI, C++ support,
# type of C library and all C library features.
$(STAMP_DIR)/ext-toolchain-checked:
	@echo "Checking external toolchain settings"
	$(Q)$(call check_cross_compiler_exists,$(TOOLCHAIN_EXTERNAL_CC))
	$(Q)LIBC_A_LOCATION=`readlink -f $$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) -print-file-name=libc.a)` ; \
	SYSROOT_DIR=`echo $${LIBC_A_LOCATION} | sed -r -e 's:usr/lib(64)?/libc\.a::'` ; \
	if test -z "$${SYSROOT_DIR}" ; then \
		@echo "External toolchain doesn't support --sysroot. Cannot use." ; \
		exit 1 ; \
	fi ; \
	if test x$(BR2_arm) == x"y" ; then \
		$(call check_arm_abi,$(TOOLCHAIN_EXTERNAL_CC)) ; \
	fi ; \
	if test x$(BR2_INSTALL_LIBSTDCPP) == x"y" ; then \
		$(call check_cplusplus,$(TOOLCHAIN_EXTERNAL_CXX)) ; \
	fi ; \
	if test x$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC) == x"y" ; then \
		$(call check_uclibc,$${SYSROOT_DIR}) ; \
	else \
		$(call check_glibc,$${SYSROOT_DIR}) ; \
	fi
	$(Q)touch $@

# Integration of the toolchain into Buildroot: find the main sysroot
# and the variant-specific sysroot, then copy the needed libraries to
# the $(TARGET_DIR) and copy the whole sysroot (libraries and headers)
# to $(STAGING_DIR).
#
# Variables are defined as follows:
#
#  LIBC_A_LOCATION:     location of the libc.a file in the default
#                       multilib variant (allows to find the main
#                       sysroot directory)
#                       Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/usr/lib/libc.a
#
#  SYSROOT_DIR:         the main sysroot directory, deduced from
#                       LIBC_A_LOCATION by removing the
#                       usr/lib[64]/libc.a part of the path.
#                       Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/
#
# ARCH_LIBC_A_LOCATION: location of the libc.a file in the selected
#                       multilib variant (taking into account the
#                       CFLAGS). Allows to find the sysroot of the
#                       selected multilib variant.
#                       Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/usr/lib/libc.a
#
# ARCH_SYSROOT_DIR:     the sysroot of the selected multilib variant,
#                       deduced from ARCH_LIBC_A_LOCATION by removing
#                       usr/lib[64]/libc.a at the end of the path.
#                       Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/
#
# ARCH_LIB_DIR:         'lib' or 'lib64' depending on where libraries are
#                       stored. Deduced from ARCH_LIBC_A_LOCATION by
#                       looking at usr/lib??/libc.a.
#                       Ex: lib
#
# ARCH_SUBDIR:          the relative location of the sysroot of the selected
#                       multilib variant compared to the main sysroot.
#			Ex: mips16/soft-float/el
#
# SUPPORT_LIB_DIR:      some toolchains, such as recent Linaro toolchains,
#                       store GCC support libraries (libstdc++,
#                       libgcc_s, etc.) outside of the sysroot. In
#                       this case, SUPPORT_LIB_DIR is set to a
#                       non-empty value, and points to the directory
#                       where these support libraries are
#                       available. Those libraries will be copied to
#                       our sysroot, and the directory will also be
#                       considered when searching libraries for copy
#                       to the target filesystem.

$(STAMP_DIR)/ext-toolchain-installed: $(TOOLCHAIN_EXTERNAL_DEPENDENCIES)
	$(Q)LIBC_A_LOCATION=`readlink -f $$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) -print-file-name=libc.a)` ; \
	SYSROOT_DIR=`echo $${LIBC_A_LOCATION} | sed -r -e 's:usr/lib(64)?/libc\.a::'` ; \
	if test -z "$${SYSROOT_DIR}" ; then \
		@echo "External toolchain doesn't support --sysroot. Cannot use." ; \
		exit 1 ; \
	fi ; \
	ARCH_LIBC_A_LOCATION=`readlink -f $$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libc.a)` ; \
	ARCH_SYSROOT_DIR=`echo $${ARCH_LIBC_A_LOCATION} | sed -r -e 's:usr/lib(64)?/libc\.a::'` ; \
	ARCH_LIB_DIR=`echo $${ARCH_LIBC_A_LOCATION} | sed -r -e 's:.*/usr/(lib(64)?)/libc.a:\1:'` ; \
	if test `find $${ARCH_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \
			LIBSTDCPP_A_LOCATION=`readlink -f $$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a)` ; \
			SUPPORT_LIB_DIR=`echo $${LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \
		else \
			SUPPORT_LIB_DIR="" ; \
	fi ; \
	if test `find $${ARCH_SYSROOT_DIR} -name 'libatomic.so*' | wc -l` -eq 0 ; then \
			LIBATOMIC_SO_LOCATION=`readlink -f $$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libatomic.so)` ; \
			SUPPORT_LIB_DIR+=`echo $${LIBATOMIC_SO_LOCATION} | sed -r -e 's:libatomic\.so[.0-9]*::'` ; \
	fi ; \
	ARCH_SUBDIR=`echo $${ARCH_SYSROOT_DIR} | sed -r -e "s:^$${SYSROOT_DIR}(.*)/$$:\1:"` ; \
	mkdir -p $(TARGET_DIR)/lib ; \
	echo "Copy external toolchain libraries to target..." ; \
	for libs in $(LIB_EXTERNAL_LIBS); do \
		$(call copy_toolchain_lib_root,$${ARCH_SYSROOT_DIR},$${SUPPORT_LIB_DIR},$${ARCH_LIB_DIR},$$libs,/lib); \
	done ; \
	for libs in $(USR_LIB_EXTERNAL_LIBS); do \
		$(call copy_toolchain_lib_root,$${ARCH_SYSROOT_DIR},$${SUPPORT_LIB_DIR},$${ARCH_LIB_DIR},$$libs,/usr/lib); \
	done ; \
	echo "Copy external toolchain sysroot to staging..." ; \
	$(call copy_toolchain_sysroot,$${SYSROOT_DIR},$${ARCH_SYSROOT_DIR},$${ARCH_SUBDIR},$${ARCH_LIB_DIR},$${SUPPORT_LIB_DIR}) ; \
	if [ -L $${ARCH_SYSROOT_DIR}/lib64 ] ; then \
		$(call create_lib64_symlinks) ; \
	fi ; \
	touch $@

# Build toolchain wrapper for preprocessor, C and C++ compiler, and setup
# symlinks for everything else
$(HOST_DIR)/usr/bin/ext-toolchain-wrapper: $(STAMP_DIR)/ext-toolchain-installed
	mkdir -p $(HOST_DIR)/usr/bin; cd $(HOST_DIR)/usr/bin; \
	for i in $(TOOLCHAIN_EXTERNAL_CROSS)*; do \
		base=$${i##*/}; \
		case "$$base" in \
		*cc|*cc-*|*++|*++-*|*cpp) \
			ln -sf $(@F) $$base; \
			;; \
		*) \
			ln -sf $$i .; \
			;; \
		esac; \
	done ;
	$(HOSTCC) $(HOST_CFLAGS) $(TOOLCHAIN_EXTERNAL_WRAPPER_ARGS) -s \
		toolchain/toolchain-external/ext-toolchain-wrapper.c -o $@

# make sure ccache is ready before building toolchain wrapper
ifeq ($(BR2_CCACHE),y)
$(STAMP_DIR)/ext-toolchain-checked $(STAMP_DIR)/ext-toolchain-wrapper: host-ccache
endif

# 'uclibc' is the target to provide toolchain / staging dir
uclibc: dependencies $(HOST_DIR)/usr/bin/ext-toolchain-wrapper

ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y)
# download ext toolchain if so configured
uclibc-source: $(addprefix $(DL_DIR)/,$(TOOLCHAIN_EXTERNAL_SOURCE))
endif