| # Makefile for to build a gcc/uClibc toolchain |
| # |
| # Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org> |
| # Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org> |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| # General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| |
| ifneq ($(GCC_SNAP_DATE),) |
| GCC_SITE:=ftp://sources.redhat.com/pub/gcc/snapshots/$(GCC_VERSION) |
| else ifeq ($(findstring avr32,$(GCC_VERSION)),avr32) |
| GCC_SITE:=ftp://www.at91.com/pub/buildroot/ |
| else |
| GCC_SITE:=$(BR2_GNU_MIRROR)/gcc/gcc-$(GCC_VERSION) |
| endif |
| |
| ifneq ($(filter xtensa%,$(ARCH)),) |
| include target/xtensa/patch.in |
| GCC_PATCH_EXTRA:=$(call XTENSA_PATCH,gcc,$(GCC_PATCH_DIR),. ..) |
| endif |
| |
| GCC_SOURCE:=gcc-$(GCC_VERSION).tar.bz2 |
| GCC_PATCH_DIR:=toolchain/gcc/$(GCC_VERSION) |
| GCC_DIR:=$(TOOLCHAIN_DIR)/gcc-$(GCC_VERSION) |
| GCC_CAT:=$(BZCAT) |
| GCC_STRIP_HOST_BINARIES:=nope |
| GCC_SRC_DIR:=$(GCC_DIR) |
| |
| # Branding works on >= 4.3 |
| ifneq ($(findstring x4.2.,x$(GCC_VERSION)),x4.2.) |
| EXTRA_GCC_CONFIG_OPTIONS+=--with-pkgversion="Buildroot $(BR2_VERSION_FULL)" \ |
| --with-bugurl="http://bugs.buildroot.net/" |
| endif |
| |
| # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=43810 |
| # Workaround until it's fixed in 4.5.4 or later |
| ifeq ($(ARCH),powerpc) |
| ifeq ($(findstring x4.5.,x$(GCC_VERSION)),x4.5.) |
| GCC_OPTSPACE=--disable-target-optspace |
| endif |
| else |
| GCC_OPTSPACE=--enable-target-optspace |
| endif |
| |
| # gcc 4.6.x quadmath requires wchar |
| ifneq ($(BR2_TOOLCHAIN_BUILDROOT_WCHAR),y) |
| GCC_QUADMATH=--disable-libquadmath |
| endif |
| |
| ############################################################# |
| # |
| # Setup some initial stuff |
| # |
| ############################################################# |
| |
| GCC_STAGING_PREREQ+=$(STAGING_DIR)/usr/lib/libc.a |
| |
| GCC_TARGET_LANGUAGES:=c |
| |
| GCC_CROSS_LANGUAGES:=c |
| ifeq ($(BR2_INSTALL_LIBSTDCPP),y) |
| GCC_CROSS_LANGUAGES:=$(GCC_CROSS_LANGUAGES),c++ |
| endif |
| ifeq ($(BR2_GCC_CROSS_FORTRAN),y) |
| GCC_CROSS_LANGUAGES:=$(GCC_CROSS_LANGUAGES),fortran |
| endif |
| ifeq ($(BR2_GCC_CROSS_OBJC),y) |
| GCC_CROSS_LANGUAGES:=$(GCC_CROSS_LANGUAGES),objc |
| endif |
| |
| ifeq ($(BR2_INSTALL_LIBSTDCPP),y) |
| GCC_TARGET_LANGUAGES:=$(GCC_TARGET_LANGUAGES),c++ |
| endif |
| |
| ifeq ($(BR2_INSTALL_OBJC),y) |
| GCC_TARGET_LANGUAGES:=$(GCC_TARGET_LANGUAGES),objc |
| endif |
| |
| ifeq ($(BR2_INSTALL_FORTRAN),y) |
| GCC_TARGET_LANGUAGES:=$(GCC_TARGET_LANGUAGES),fortran |
| endif |
| |
| # GCC 4.x prerequisites |
| GCC_WITH_HOST_GMP = --with-gmp=$(HOST_DIR)/usr |
| GCC_WITH_HOST_MPFR = --with-mpfr=$(HOST_DIR)/usr |
| ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y) |
| HOST_SOURCE += host-gmp-source host-mpfr-source |
| endif |
| GCC_HOST_PREREQ = host-gmp host-mpfr |
| GCC_TARGET_PREREQ += mpfr gmp |
| |
| # GCC 4.5.x prerequisites |
| ifeq ($(findstring x4.5.,x$(GCC_VERSION)),x4.5.) |
| GCC_WITH_HOST_MPC = --with-mpc=$(HOST_DIR)/usr |
| GCC_TARGET_PREREQ += mpc |
| ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y) |
| HOST_SOURCE += host-mpc-source |
| endif |
| GCC_HOST_PREREQ += host-mpc |
| endif |
| |
| # GCC 4.6.x prerequisites |
| ifeq ($(findstring x4.6.,x$(GCC_VERSION)),x4.6.) |
| GCC_WITH_HOST_MPC = --with-mpc=$(HOST_DIR)/usr |
| GCC_TARGET_PREREQ += mpc |
| ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y) |
| HOST_SOURCE += host-mpc-source |
| endif |
| GCC_HOST_PREREQ += host-mpc |
| endif |
| |
| # GCC snapshot prerequisites |
| # Since we don't know and it can be quite new just ask for everything known |
| ifneq ($(GCC_SNAP_DATE),) |
| GCC_WITH_HOST_MPC = --with-mpc=$(HOST_DIR)/usr |
| GCC_TARGET_PREREQ += mpc |
| ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y) |
| HOST_SOURCE += host-mpc-source |
| endif |
| GCC_HOST_PREREQ += host-mpc |
| endif |
| |
| ifeq ($(BR2_GCC_SHARED_LIBGCC),y) |
| GCC_SHARED_LIBGCC:=--enable-shared |
| else |
| GCC_SHARED_LIBGCC:=--disable-shared |
| endif |
| |
| ifeq ($(BR2_GCC_ENABLE_OPENMP),y) |
| GCC_ENABLE_OPENMP:=--enable-libgomp |
| else |
| GCC_ENABLE_OPENMP:=--disable-libgomp |
| endif |
| |
| ifeq ($(BR2_GCC_ENABLE_TLS),y) |
| GCC_TLS:=--enable-tls |
| else |
| GCC_TLS:=--disable-tls |
| endif |
| |
| ifeq ($(BR2_PTHREADS_NONE),y) |
| THREADS:=--disable-threads |
| else |
| THREADS:=--enable-threads |
| endif |
| |
| ifeq ($(BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE),y) |
| GCC_DECIMAL_FLOAT:=--disable-decimal-float |
| endif |
| |
| # gcc version < 4.2.0 don't have -Wno-overlength-strings and the configure |
| # script has problems detecting it, so help it |
| ifeq ($(shell test $(HOSTCC_VERSION) -lt 420 && echo OLD),OLD) |
| GCC_CONF_ENV:=acx_cv_prog_cc_pedantic__Wno_long_long__Wno_variadic_macros_____________Wno_overlength_strings=no \ |
| acx_cv_prog_cc_warning__Wno_overlength_strings=no |
| endif |
| |
| ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y) |
| HOST_SOURCE+=gcc-source |
| endif |
| |
| $(DL_DIR)/$(GCC_SOURCE): |
| mkdir -p $(DL_DIR) |
| $(call DOWNLOAD,$(GCC_SITE),$(GCC_SOURCE)) |
| |
| gcc-unpacked: $(GCC_DIR)/.patched |
| $(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE) |
| mkdir -p $(TOOLCHAIN_DIR) |
| rm -rf $(GCC_DIR) |
| $(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOLCHAIN_DIR) $(TAR_OPTIONS) - |
| $(call CONFIG_UPDATE,$(@D)) |
| touch $@ |
| |
| gcc-patched: $(GCC_DIR)/.patched |
| $(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked |
| # Apply any files named gcc-*.patch from the source directory to gcc |
| ifneq ($(wildcard $(GCC_PATCH_DIR)),) |
| support/scripts/apply-patches.sh $(GCC_DIR) $(GCC_PATCH_DIR) \*.patch $(GCC_PATCH_EXTRA) |
| endif |
| |
| ifeq ($(ARCH)-$(BR2_GCC_SHARED_LIBGCC),powerpc-y) |
| ifneq ($(BR2_SOFT_FLOAT),) |
| support/scripts/apply-patches.sh $(GCC_DIR) toolchain/gcc/$(GCC_VERSION) powerpc-link-with-math-lib.patch.conditional |
| endif |
| endif |
| touch $@ |
| |
| ############################################################# |
| # |
| # build the first pass gcc compiler |
| # |
| ############################################################# |
| GCC_BUILD_DIR1:=$(TOOLCHAIN_DIR)/gcc-$(GCC_VERSION)-initial |
| |
| host_prereq=$(BUILD_DIR)/.prereq |
| host-prereq: $(host_prereq) |
| $(host_prereq): $(patsubst %,$(STAMP_DIR)/%,$(GCC_HOST_PREREQ)) |
| touch $@ |
| |
| $(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched $(host_prereq) |
| mkdir -p $(GCC_BUILD_DIR1) |
| (cd $(GCC_BUILD_DIR1); rm -rf config.cache; \ |
| $(HOST_CONFIGURE_OPTS) \ |
| $(GCC_DIR)/configure $(QUIET) \ |
| --prefix=$(HOST_DIR)/usr \ |
| --build=$(GNU_HOST_NAME) \ |
| --host=$(GNU_HOST_NAME) \ |
| --target=$(REAL_GNU_TARGET_NAME) \ |
| --enable-languages=c \ |
| $(BR2_CONFIGURE_DEVEL_SYSROOT) \ |
| --disable-__cxa_atexit \ |
| $(GCC_OPTSPACE) \ |
| $(GCC_QUADMATH) \ |
| $(GCC_ENABLE_OPENMP) \ |
| --with-gnu-ld \ |
| --disable-shared \ |
| --disable-libssp \ |
| --without-headers \ |
| --with-newlib \ |
| --disable-multilib \ |
| $(GCC_TLS) \ |
| $(GCC_WITH_HOST_GMP) \ |
| $(GCC_WITH_HOST_MPFR) \ |
| $(GCC_WITH_HOST_MPC) \ |
| $(DISABLE_NLS) \ |
| $(THREADS) \ |
| $(GCC_DECIMAL_FLOAT) \ |
| $(SOFT_FLOAT_CONFIG_OPTION) \ |
| $(GCC_WITH_ABI) $(GCC_WITH_ARCH) $(GCC_WITH_TUNE) $(GCC_WITH_CPU) \ |
| $(EXTRA_GCC_CONFIG_OPTIONS) \ |
| $(EXTRA_GCC1_CONFIG_OPTIONS) \ |
| $(QUIET) \ |
| ) |
| touch $@ |
| |
| $(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured |
| ifeq ($(BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE),y) |
| $(GCC_CONF_ENV) $(MAKE) -C $(GCC_BUILD_DIR1) all-gcc |
| else |
| $(MAKE) -C $(GCC_BUILD_DIR1) all-gcc |
| endif |
| touch $@ |
| |
| gcc_initial=$(GCC_BUILD_DIR1)/.installed |
| $(gcc_initial): $(HOST_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-gcc |
| $(HOST_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-gcc: $(GCC_BUILD_DIR1)/.compiled |
| PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR1) install-gcc |
| touch $(gcc_initial) |
| |
| ifeq ($(BR2_CCACHE),y) |
| # we'll need ccache for the host built before configuring, |
| # otherwise various detection scripts will fail. |
| PRE_DEPENDS += host-ccache |
| host_preconfig=$(BASE_DIR)/.preconfig |
| $(host_preconfig): $(patsubst %,$(STAMP_DIR)/%,$(PRE_DEPENDS)) |
| touch $@ |
| host-preconfig: $(host_preconfig) |
| endif |
| host-preconfig: |
| |
| host-binutils: $(host_prereq) |
| $(GCC_BUILD_DIR1)/.installed: | host-binutils |
| gcc_initial: $(GCC_BUILD_DIR1)/.installed host-binutils |
| |
| gcc_initial-clean: |
| rm -rf $(GCC_BUILD_DIR1) |
| |
| gcc_initial-dirclean: |
| rm -rf $(GCC_BUILD_DIR1) $(GCC_DIR) |
| |
| ############################################################# |
| # |
| # build the second pass gcc compiler |
| # |
| ############################################################# |
| GCC_BUILD_DIR2:=$(TOOLCHAIN_DIR)/gcc-$(GCC_VERSION)-intermediate |
| |
| # The --without-headers option stopped working with gcc 3.0 and has never been |
| # fixed, so we need to actually have working C library header files prior to |
| # the step or libgcc will not build... |
| |
| $(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.patched $(gcc_initial) |
| mkdir -p $(GCC_BUILD_DIR2) |
| (cd $(GCC_BUILD_DIR2); rm -rf config.cache; \ |
| $(HOST_CONFIGURE_OPTS) \ |
| $(GCC_DIR)/configure $(QUIET) \ |
| --prefix=$(HOST_DIR)/usr \ |
| --build=$(GNU_HOST_NAME) \ |
| --host=$(GNU_HOST_NAME) \ |
| --target=$(REAL_GNU_TARGET_NAME) \ |
| --enable-languages=c \ |
| $(BR2_CONFIGURE_DEVEL_SYSROOT) \ |
| --disable-__cxa_atexit \ |
| $(GCC_OPTSPACE) \ |
| $(GCC_QUADMATH) \ |
| $(GCC_ENABLE_OPENMP) \ |
| --with-gnu-ld \ |
| --enable-shared \ |
| --disable-libssp \ |
| --disable-multilib \ |
| $(GCC_TLS) \ |
| $(GCC_WITH_HOST_GMP) \ |
| $(GCC_WITH_HOST_MPFR) \ |
| $(GCC_WITH_HOST_MPC) \ |
| $(DISABLE_NLS) \ |
| $(THREADS) \ |
| $(MULTILIB) \ |
| $(GCC_DECIMAL_FLOAT) \ |
| $(SOFT_FLOAT_CONFIG_OPTION) \ |
| $(GCC_WITH_ABI) $(GCC_WITH_ARCH) $(GCC_WITH_TUNE) $(GCC_WITH_CPU) \ |
| $(EXTRA_GCC_CONFIG_OPTIONS) \ |
| $(EXTRA_GCC2_CONFIG_OPTIONS) \ |
| $(QUIET) \ |
| ) |
| touch $@ |
| |
| $(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured |
| # gcc >= 4.3.0 have to also build all-target-libgcc |
| ifeq ($(BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE),y) |
| $(GCC_CONF_ENV) $(MAKE) -C $(GCC_BUILD_DIR2) all-gcc all-target-libgcc |
| else |
| $(MAKE) -C $(GCC_BUILD_DIR2) all-gcc |
| endif |
| touch $@ |
| |
| gcc_intermediate=$(GCC_BUILD_DIR2)/.installed |
| $(gcc_intermediate): $(GCC_BUILD_DIR2)/.compiled |
| # gcc >= 4.3.0 have to also install install-target-libgcc |
| ifeq ($(BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE),y) |
| PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR2) install-gcc install-target-libgcc |
| else |
| PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR2) install-gcc |
| endif |
| touch $(gcc_intermediate) |
| |
| gcc_intermediate: uclibc-configured $(gcc_intermediate) |
| |
| gcc_intermediate-clean: |
| rm -rf $(GCC_BUILD_DIR2) |
| |
| gcc_intermediate-dirclean: |
| rm -rf $(GCC_BUILD_DIR2) $(GCC_DIR) |
| |
| ############################################################# |
| # |
| # third pass compiler build. Build the compiler targeting |
| # the newly built shared uClibc library. |
| # |
| ############################################################# |
| # |
| # Sigh... I had to rework things because using --with-gxx-include-dir |
| # causes issues with include dir search order for g++. This seems to |
| # have something to do with "path translations" and possibly doesn't |
| # affect gcc-target. However, I haven't tested gcc-target yet so no |
| # guarantees. mjn3 |
| |
| GCC_BUILD_DIR3:=$(TOOLCHAIN_DIR)/gcc-$(GCC_VERSION)-final |
| $(GCC_BUILD_DIR3)/.configured: $(GCC_SRC_DIR)/.patched \ |
| $(gcc_intermediate) $(GCC_STAGING_PREREQ) |
| mkdir -p $(GCC_BUILD_DIR3) |
| # Important! Required for limits.h to be fixed. |
| ln -snf ../include/ $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/sys-include |
| (cd $(GCC_BUILD_DIR3); rm -rf config.cache; \ |
| $(HOST_CONFIGURE_OPTS) \ |
| $(GCC_SRC_DIR)/configure $(QUIET) \ |
| --prefix=$(HOST_DIR)/usr \ |
| --build=$(GNU_HOST_NAME) \ |
| --host=$(GNU_HOST_NAME) \ |
| --target=$(REAL_GNU_TARGET_NAME) \ |
| --enable-languages=$(GCC_CROSS_LANGUAGES) \ |
| $(BR2_CONFIGURE_STAGING_SYSROOT) \ |
| $(BR2_CONFIGURE_BUILD_TOOLS) \ |
| --disable-__cxa_atexit \ |
| $(GCC_OPTSPACE) \ |
| $(GCC_QUADMATH) \ |
| $(GCC_ENABLE_OPENMP) \ |
| --with-gnu-ld \ |
| --disable-libssp \ |
| --disable-multilib \ |
| $(GCC_TLS) \ |
| $(GCC_SHARED_LIBGCC) \ |
| $(GCC_WITH_HOST_GMP) \ |
| $(GCC_WITH_HOST_MPFR) \ |
| $(GCC_WITH_HOST_MPC) \ |
| $(DISABLE_NLS) \ |
| $(THREADS) \ |
| $(GCC_DECIMAL_FLOAT) \ |
| $(SOFT_FLOAT_CONFIG_OPTION) \ |
| $(GCC_WITH_ABI) $(GCC_WITH_ARCH) $(GCC_WITH_TUNE) $(GCC_WITH_CPU) \ |
| $(DISABLE_LARGEFILE) \ |
| $(EXTRA_GCC_CONFIG_OPTIONS) \ |
| $(EXTRA_GCC2_CONFIG_OPTIONS) \ |
| ) |
| touch $@ |
| |
| $(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured |
| $(GCC_CONF_ENV) $(MAKE) -C $(GCC_BUILD_DIR3) all |
| touch $@ |
| |
| $(GCC_BUILD_DIR3)/.installed: $(GCC_BUILD_DIR3)/.compiled |
| PATH=$(TARGET_PATH) $(MAKE) \ |
| -C $(GCC_BUILD_DIR3) install |
| if [ -d "$(STAGING_DIR)/lib64" ]; then \ |
| if [ ! -e "$(STAGING_DIR)/lib" ]; then \ |
| mkdir -p "$(STAGING_DIR)/lib"; \ |
| fi; \ |
| mv "$(STAGING_DIR)/lib64/"* "$(STAGING_DIR)/lib/"; \ |
| rmdir "$(STAGING_DIR)/lib64"; \ |
| rm "$(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib64";\ |
| fi |
| # Strip the host binaries |
| ifeq ($(GCC_STRIP_HOST_BINARIES),true) |
| strip --strip-all -R .note -R .comment $(filter-out %-gccbug %-embedspu,$(wildcard $(HOST_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-*)) |
| endif |
| # Make sure we have 'cc'. |
| if [ ! -e $(HOST_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-cc ]; then \ |
| ln -snf $(REAL_GNU_TARGET_NAME)-gcc \ |
| $(HOST_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-cc; \ |
| fi |
| if [ ! -e $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/bin/cc ]; then \ |
| ln -snf gcc $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/bin/cc; \ |
| fi |
| # Set up the symlinks to enable lying about target name. |
| set -e; \ |
| (cd $(HOST_DIR)/usr; \ |
| ln -snf $(REAL_GNU_TARGET_NAME) $(GNU_TARGET_NAME); \ |
| cd bin; \ |
| for app in $(REAL_GNU_TARGET_NAME)-*; do \ |
| ln -snf $${app} \ |
| $(GNU_TARGET_NAME)$${app##$(REAL_GNU_TARGET_NAME)}; \ |
| done; \ |
| ) |
| |
| mkdir -p $(TARGET_DIR)/usr/lib $(TARGET_DIR)/usr/sbin |
| touch $@ |
| |
| $(STAMP_DIR)/gcc_libs_target_installed: $(GCC_BUILD_DIR3)/.installed |
| ifeq ($(BR2_GCC_SHARED_LIBGCC),y) |
| # These go in /lib, so... |
| rm -rf $(TARGET_DIR)/usr/lib/libgcc_s*.so* |
| -cp -dpf $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib*/libgcc_s* \ |
| $(STAGING_DIR)/lib/ |
| -cp -dpf $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib*/libgcc_s* \ |
| $(TARGET_DIR)/lib/ |
| -$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(TARGET_DIR)/lib/libgcc_s* |
| endif |
| ifeq ($(BR2_INSTALL_LIBSTDCPP),y) |
| ifeq ($(BR2_GCC_SHARED_LIBGCC),y) |
| mkdir -p $(TARGET_DIR)/usr/lib |
| -cp -dpf $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib*/libstdc++.so* \ |
| $(STAGING_DIR)/usr/lib/ |
| -cp -dpf $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib*/libstdc++.so* \ |
| $(TARGET_DIR)/usr/lib/ |
| -$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(TARGET_DIR)/usr/lib/libstdc++.so* |
| endif |
| endif |
| ifeq ($(BR2_GCC_ENABLE_OPENMP),y) |
| cp -dpf $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib*/libgomp.so* $(STAGING_DIR)/usr/lib/ |
| cp -dpf $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib*/libgomp.so* $(TARGET_DIR)/usr/lib/ |
| -$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(TARGET_DIR)/usr/lib/libgomp.so* |
| endif |
| mkdir -p $(@D) |
| touch $@ |
| |
| cross_compiler:=$(HOST_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-gcc |
| cross_compiler gcc: gcc_intermediate \ |
| $(LIBFLOAT_TARGET) uclibc $(GCC_BUILD_DIR3)/.installed \ |
| $(STAMP_DIR)/gcc_libs_target_installed \ |
| $(GCC_TARGETS) |
| |
| gcc-source: $(DL_DIR)/$(GCC_SOURCE) |
| |
| gcc-clean: |
| rm -rf $(GCC_BUILD_DIR3) |
| for prog in cpp gcc gcc-[0-9]* protoize unprotoize gcov gccbug cc; do \ |
| rm -f $(HOST_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-$$prog; \ |
| rm -f $(HOST_DIR)/usr/bin/$(GNU_TARGET_NAME)-$$prog; \ |
| done |
| |
| gcc-dirclean: gcc_initial-dirclean |
| rm -rf $(GCC_BUILD_DIR3) |
| |
| ############################################################# |
| # |
| # Next build target gcc compiler |
| # |
| ############################################################# |
| GCC_BUILD_DIR4:=$(BUILD_DIR)/gcc-$(GCC_VERSION)-target |
| |
| $(GCC_BUILD_DIR4)/.prepared: $(STAMP_DIR)/gcc_libs_target_installed |
| mkdir -p $(GCC_BUILD_DIR4) |
| touch $@ |
| |
| $(GCC_BUILD_DIR4)/.configured: $(GCC_BUILD_DIR4)/.prepared |
| (cd $(GCC_BUILD_DIR4); rm -rf config.cache; \ |
| $(TARGET_CONFIGURE_OPTS) \ |
| $(TARGET_CONFIGURE_ARGS) \ |
| CFLAGS_FOR_TARGET="$(TARGET_CFLAGS) $(TARGET_SOFT_FLOAT)" \ |
| CXXFLAGS_FOR_TARGET="$(TARGET_CFLAGS) $(TARGET_SOFT_FLOAT)" \ |
| CFLAGS="$(TARGET_CFLAGS) $(TARGET_SOFT_FLOAT)" \ |
| BOOT_CFLAGS="$(TARGET_CFLAGS) $(TARGET_SOFT_FLOAT)" \ |
| GCC_FOR_TARGET="$(TARGET_CC)" \ |
| CC_FOR_TARGET="$(TARGET_CC)" \ |
| CXX_FOR_TARGET="$(TARGET_CXX)" \ |
| $(GCC_SRC_DIR)/configure $(QUIET) \ |
| --prefix=/usr \ |
| --build=$(GNU_HOST_NAME) \ |
| --host=$(REAL_GNU_TARGET_NAME) \ |
| --target=$(REAL_GNU_TARGET_NAME) \ |
| --enable-languages=$(GCC_TARGET_LANGUAGES) \ |
| --with-gxx-include-dir=/usr/include/c++ \ |
| --disable-__cxa_atexit \ |
| $(GCC_OPTSPACE) \ |
| $(GCC_QUADMATH) \ |
| $(GCC_ENABLE_OPENMP) \ |
| --with-gnu-ld \ |
| --disable-libssp \ |
| --disable-multilib \ |
| $(GCC_TLS) \ |
| $(GCC_SHARED_LIBGCC) \ |
| $(DISABLE_NLS) \ |
| $(THREADS) \ |
| $(GCC_DECIMAL_FLOAT) \ |
| $(SOFT_FLOAT_CONFIG_OPTION) \ |
| $(GCC_WITH_ABI) $(GCC_WITH_ARCH) $(GCC_WITH_TUNE) $(GCC_WITH_CPU) \ |
| $(DISABLE_LARGEFILE) \ |
| $(EXTRA_GCC_CONFIG_OPTIONS) \ |
| $(EXTRA_TARGET_GCC_CONFIG_OPTIONS) \ |
| $(EXTRA_GCC4_CONFIG_OPTIONS) \ |
| ) |
| touch $@ |
| |
| $(GCC_BUILD_DIR4)/.compiled: $(GCC_BUILD_DIR4)/.configured |
| PATH=$(TARGET_PATH) \ |
| $(MAKE) -C $(GCC_BUILD_DIR4) all |
| touch $@ |
| |
| GCC_LIB_SUBDIR=lib/gcc/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION) |
| ifeq ($(findstring x4.2,x$(GCC_VERSION)),x4.2) |
| GCC_INCLUDE_DIR:=include |
| else |
| GCC_INCLUDE_DIR:=include-fixed |
| endif |
| |
| $(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR4)/.compiled |
| PATH=$(TARGET_PATH) DESTDIR=$(TARGET_DIR) \ |
| $(MAKE1) -C $(GCC_BUILD_DIR4) install |
| # Remove broken specs file (cross compile flag is set). |
| rm -f $(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR)/specs |
| |
| # Remove useless copies of gcc, c++, g++ |
| rm -f $(TARGET_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-gcc* |
| rm -f $(TARGET_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-g++* |
| rm -f $(TARGET_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-c++* |
| |
| # Work around problem of missing syslimits.h |
| if [ ! -f $(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR)/$(GCC_INCLUDE_DIR)/syslimits.h ]; then \ |
| echo "warning: working around missing syslimits.h"; \ |
| cp -f $(HOST_DIR)/$(GCC_LIB_SUBDIR)/$(GCC_INCLUDE_DIR)/syslimits.h \ |
| $(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR)/$(GCC_INCLUDE_DIR)/; \ |
| fi |
| |
| # Make sure we have 'cc'. |
| if [ ! -e $(TARGET_DIR)/usr/bin/cc ]; then \ |
| ln -snf gcc $(TARGET_DIR)/usr/bin/cc; \ |
| fi |
| |
| # Copy C runtime initialization object files |
| cp -f $(STAGING_DIR)/usr/lib/*crt*.o $(TARGET_DIR)/usr/lib |
| |
| # These are in /lib, so... |
| rm -rf $(TARGET_DIR)/usr/lib/libgcc_s*.so* |
| touch -c $@ |
| |
| gcc_target: $(STAMP_DIR)/gcc_libs_target_installed $(GCC_TARGET_PREREQ) binutils $(TARGET_DIR)/usr/bin/gcc |
| |
| gcc_target-clean: |
| rm -rf $(GCC_BUILD_DIR4) |
| rm -f $(TARGET_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)* |
| |
| gcc_target-dirclean: |
| rm -rf $(GCC_BUILD_DIR4) |
