#!/bin/sh

. /etc/utils.sh
. /etc/wvtest.sh

ip() {
  echo "1.2.3.4"
}

brctl_port_val=1
brctl() {
  echo "port no	mac addr	is local?	ageing timer"
  echo "  ${brctl_port_val}	01:02:03:04:05:06	yes	0.00"
}

activewan() {
  echo "$activewan_val"
}

WVSTART "activewan-type"

activewan_val="pon0-test"
output=$(. activewan-type)
WVPASSEQ "$output" "GPON"

activewan_val="man0-test"
output=$(. activewan-type)
WVPASSEQ "$output" "GPON"

activewan_val="wan0-test"
output=$(. activewan-type)
WVPASSEQ "$output" "ETHERNET"

activewan_val="wcli0-test"
output=$(. activewan-type)
WVPASSEQ "$output" "WIFI"

activewan_val="wlan0-test"
output=$(. activewan-type)
WVPASSEQ "$output" "WIFI"

activewan_val="eth2-test"
output=$(. activewan-type)
WVPASSEQ "$output" "WIFI"

activewan_val="lan0-test"
output=$(. activewan-type)
WVPASSEQ "$output" "ETHERNET"

activewan_val="eth0-test"
output=$(. activewan-type)
WVPASSEQ "$output" "ETHERNET"

activewan_val="eth1-test"
output=$(. activewan-type)
WVPASSEQ "$output" "MOCA"

activewan_val="moca0-test"
output=$(. activewan-type)
WVPASSEQ "$output" "MOCA"

activewan_val="zomg0-test"
output=$(. activewan-type)
WVPASSEQ "$output" "UNKNOWN_TYPE"

activewan_val=""
output=$(. activewan-type)
WVPASSEQ "$output" "UNKNOWN_IF"


# Set up for br0 test is somewhat extensive.
BR_IF_PATH=/tmp/activewan-type-test.$$.br_if
mkdir -p "$BR_IF_PATH"/br0-test/brif
echo >"$BR_IF_PATH"/br0-test/brif/lan0-test
echo >"$BR_IF_PATH"/br0-test/brif/moca0-test
echo >"$BR_IF_PATH"/br0-test/brif/pon0-test
echo >"$BR_IF_PATH"/br0-test/brif/wlan0-test
echo >"$BR_IF_PATH"/br0-test/brif/zomg0-test

PROC_NET_ARP=/tmp/activewan-type-test.$$.proc_net_arp
echo "IP address   HW type   Flags   HW address   Mask   Device
1.2.3.4   0x1  0x2  01:02:03:04:05:06   *   br0-test" >"$PROC_NET_ARP"

activewan_val="br0-test"
br_if_path=${BR_IF_PATH:-"/sys/devices/virtual/net/"}

brctl_port_val=1
output=$(. activewan-type)
WVPASSEQ "$output" "ETHERNET"

brctl_port_val=2
output=$(. activewan-type)
WVPASSEQ "$output" "MOCA"

# GPON interfaces are not in a bridge in the real product, but
# we can test for it anyway. It should work.
brctl_port_val=3
output=$(. activewan-type)
WVPASSEQ "$output" "GPON"

brctl_port_val=4
output=$(. activewan-type)
WVPASSEQ "$output" "WIFI"

brctl_port_val=5
output=$(. activewan-type)
WVPASSEQ "$output" "UNKNOWN_TYPE"


rm -f "$PROC_NET_ARP"
rm -rf "$BR_IF_PATH"