boot/uboot/uboot.mk

#############################################################
#
# U-Boot
#
#############################################################
UBOOT_VERSION    = $(call qstrip,$(BR2_TARGET_UBOOT_VERSION))
UBOOT_BOARD_NAME = $(call qstrip,$(BR2_TARGET_UBOOT_BOARDNAME))

UBOOT_INSTALL_IMAGES = YES

ifeq ($(UBOOT_VERSION),custom)
# Handle custom U-Boot tarballs as specified by the configuration
UBOOT_TARBALL = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION))
UBOOT_SITE    = $(dir $(UBOOT_TARBALL))
UBOOT_SOURCE  = $(notdir $(UBOOT_TARBALL))
else ifeq ($(BR2_TARGET_UBOOT_CUSTOM_GIT),y)
UBOOT_SITE        = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL))
else
# Handle stable official U-Boot versions
UBOOT_SITE    = ftp://ftp.denx.de/pub/u-boot
UBOOT_SOURCE  = u-boot-$(UBOOT_VERSION).tar.bz2
endif

ifeq ($(BR2_TARGET_UBOOT_FORMAT_KWB),y)
UBOOT_BIN          = u-boot.kwb
UBOOT_MAKE_TARGET  = $(UBOOT_BIN)
else ifeq ($(BR2_TARGET_UBOOT_FORMAT_LDR),y)
UBOOT_BIN          = u-boot.ldr
else ifeq ($(BR2_TARGET_UBOOT_FORMAT_NAND_BIN),y)
UBOOT_BIN          = u-boot-nand.bin
else ifeq ($(BR2_TARGET_UBOOT_FORMAT_SPI_BIN),y)
UBOOT_BIN          = u-boot-spi.bin
else
UBOOT_BIN          = u-boot.bin
endif

UBOOT_ARCH=$(KERNEL_ARCH)

UBOOT_CONFIGURE_OPTS += CONFIG_NOSOFTFLOAT=1
UBOOT_MAKE_OPTS += \
	CROSS_COMPILE="$(CCACHE) $(TARGET_CROSS)" \
	ARCH=$(UBOOT_ARCH)

# Options added for prism
# TODO(apenwarr): consider making a buildroot config option for this.
#  Currently it only applies to prism devices, not necessarily all the devices
#  we use that might want uboot.
UBOOT_MAKE_OPTS += SPIBOOT=1 SPI=1 DDR3=1 LARGEKERNEL=1

ifeq ($(BR2_TARGET_UBOOT_FWPRINTENV),y)
define UBOOT_FWPRINTENV_INSTALL_CMDS
	$(INSTALL) -m 0755 -D $(@D)/tools/env/fw_printenv $(TARGET_DIR)/usr/sbin/fw_printenv
	ln -sf fw_printenv $(TARGET_DIR)/usr/sbin/fw_setenv
endef

define UBOOT_FWPRINTENV_BUILD_CMDS
	$(MAKE) -C $(@D) \
		HOSTCC="$(TARGET_CC)" \
		HOSTCFLAGS="$(TARGET_CFLAGS)" \
		HOSTLDFLAGS="$(TARGET_LDFLAGS)" \
		HOSTSTRIP=true \
		env
endef
endif

# Helper function to fill the U-Boot config.h file.
# Argument 1: option name
# Argument 2: option value
# If the option value is empty, this function does nothing.
define insert_define
$(if $(call qstrip,$(2)),
	@echo "#ifdef $(strip $(1))" >> $(@D)/include/config.h
	@echo "#undef $(strip $(1))" >> $(@D)/include/config.h
	@echo "#endif" >> $(@D)/include/config.h
	@echo '#define $(strip $(1)) $(call qstrip,$(2))' >> $(@D)/include/config.h)
endef

ifneq ($(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR)),)
define UBOOT_APPLY_CUSTOM_PATCHES
	support/scripts/apply-patches.sh $(@D) $(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR) \
		uboot-$(UBOOT_VERSION)-\*.patch
endef

UBOOT_POST_PATCH_HOOKS += UBOOT_APPLY_CUSTOM_PATCHES
endif

define UBOOT_CONFIGURE_CMDS
	$(TARGET_CONFIGURE_OPTS) $(UBOOT_CONFIGURE_OPTS) 	\
		$(MAKE1) -C $(@D) $(UBOOT_MAKE_OPTS)		\
		$(UBOOT_BOARD_NAME)_config
	@echo >> $(@D)/include/config.h
	@echo "/* Add a wrapper around the values Buildroot sets. */" >> $(@D)/include/config.h
	@echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(@D)/include/config.h
	@echo "#define __BR2_ADDED_CONFIG_H" >> $(@D)/include/config.h
	$(call insert_define,DATE,$(DATE))
	$(call insert_define,CONFIG_LOAD_SCRIPTS,1)
	$(call insert_define,CONFIG_IPADDR,$(BR2_TARGET_UBOOT_IPADDR))
	$(call insert_define,CONFIG_GATEWAYIP,$(BR2_TARGET_UBOOT_GATEWAY))
	$(call insert_define,CONFIG_NETMASK,$(BR2_TARGET_UBOOT_NETMASK))
	$(call insert_define,CONFIG_SERVERIP,$(BR2_TARGET_UBOOT_SERVERIP))
	$(call insert_define,CONFIG_ETHADDR,$(BR2_TARGET_UBOOT_ETHADDR))
	$(call insert_define,CONFIG_ETH1ADDR,$(BR2_TARGET_UBOOT_ETH1ADDR))
	@echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(@D)/include/config.h
endef

define UBOOT_BUILD_CMDS
	$(UBOOT_FWPRINTENV_BUILD_CMDS)
	$(TARGET_CONFIGURE_OPTS) $(UBOOT_CONFIGURE_OPTS) 	\
		$(MAKE1) -C $(@D) $(UBOOT_MAKE_OPTS) 		\
		$(UBOOT_MAKE_TARGET)
endef

define UBOOT_INSTALL_IMAGES_CMDS
	set -x; \
	set -e; \
	cp -dpf $(@D)/$(UBOOT_BIN) $(BINARIES_DIR)/$(UBOOT_BIN).built; \
	$(UBOOT_FWPRINTENV_INSTALL_CMDS)
endef

$(eval $(call GENTARGETS))

ifeq ($(BR2_TARGET_UBOOT),y)
# we NEED a board name unless we're at make source
ifeq ($(filter source,$(MAKECMDGOALS)),)
ifeq ($(UBOOT_BOARD_NAME),)
$(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
endif
endif
endif