| config BR2_TARGET_UBOOT |
| bool "U-Boot" |
| help |
| Build "Das U-Boot" Boot Monitor |
| |
| if BR2_TARGET_UBOOT |
| config BR2_TARGET_UBOOT_BOARDNAME |
| string "U-Boot board name" |
| help |
| One of U-Boot supported boards to be built. |
| This will be suffixed with _config to meet U-Boot standard naming. |
| |
| config BR2_TARGET_UBOOT_FWPRINTENV |
| bool "fw_printenv" |
| help |
| Determines whether u-boot should attempt ot build the fw_printenv/fw_setenv |
| tools. These are used to read/write from the u-boot env. |
| |
| choice |
| prompt "U-Boot Version" |
| default BR2_TARGET_UBOOT_2011_12 |
| help |
| Select the specific U-Boot version you want to use |
| |
| config BR2_TARGET_UBOOT_2011_12 |
| bool "2011.12" |
| |
| config BR2_TARGET_UBOOT_2011_09 |
| bool "2011.09" |
| |
| config BR2_TARGET_UBOOT_2011_06 |
| bool "2011.06" |
| depends on BR2_DEPRECATED |
| |
| config BR2_TARGET_UBOOT_2011_03 |
| bool "2011.03" |
| depends on BR2_DEPRECATED |
| |
| config BR2_TARGET_UBOOT_CUSTOM_TARBALL |
| bool "Custom tarball" |
| |
| config BR2_TARGET_UBOOT_CUSTOM_GIT |
| bool "Custom Git repository" |
| |
| endchoice |
| |
| if BR2_TARGET_UBOOT_CUSTOM_TARBALL |
| |
| config BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION |
| string "URL of custom U-Boot tarball" |
| |
| endif |
| |
| config BR2_TARGET_UBOOT_VERSION |
| string |
| default "2011.12" if BR2_TARGET_UBOOT_2011_12 |
| default "2011.09" if BR2_TARGET_UBOOT_2011_09 |
| default "2011.06" if BR2_TARGET_UBOOT_2011_06 |
| default "2011.03" if BR2_TARGET_UBOOT_2011_03 |
| default "custom" if BR2_TARGET_UBOOT_CUSTOM_TARBALL |
| default $BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION if BR2_TARGET_UBOOT_CUSTOM_GIT |
| |
| config BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR |
| string "custom patch dir" |
| help |
| If your board requires custom patches, add the path to the |
| directory containing the patches here. The patches must be |
| named uboot-<version>-<something>.patch. |
| |
| Most users may leave this empty |
| |
| if BR2_TARGET_UBOOT_CUSTOM_GIT |
| |
| config BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL |
| string "URL of custom Git repository" |
| |
| config BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION |
| string "Custom Git version" |
| |
| endif |
| |
| choice |
| prompt "U-Boot binary format" |
| |
| config BR2_TARGET_UBOOT_FORMAT_BIN |
| bool "u-boot.bin" |
| |
| config BR2_TARGET_UBOOT_FORMAT_NAND_BIN |
| bool "u-boot-nand.bin" |
| |
| config BR2_TARGET_UBOOT_FORMAT_SPI_BIN |
| bool "u-boot-spi.bin" |
| |
| config BR2_TARGET_UBOOT_FORMAT_KWB |
| depends on BR2_arm |
| bool "u-boot.kwb (Marvell)" |
| |
| config BR2_TARGET_UBOOT_FORMAT_LDR |
| depends on BR2_bfin |
| bool "u-boot.ldr" |
| |
| endchoice |
| |
| menuconfig BR2_TARGET_UBOOT_NETWORK |
| bool "Custom Network Settings" |
| help |
| Custom network settings for U-boot |
| |
| if BR2_TARGET_UBOOT_NETWORK |
| |
| config BR2_TARGET_UBOOT_SERVERIP |
| string "server ip" |
| default "10.175.196.221" |
| help |
| TFTP server ip address |
| |
| config BR2_TARGET_UBOOT_IPADDR |
| string "ip address" |
| default "10.175.196.18" |
| help |
| Target ip address |
| |
| config BR2_TARGET_UBOOT_GATEWAY |
| string "gateway ip" |
| default "10.175.196.1" |
| help |
| Gateway ip address |
| |
| config BR2_TARGET_UBOOT_NETMASK |
| string "netmask" |
| default "255.255.255.0" |
| help |
| Network Mask |
| |
| config BR2_TARGET_UBOOT_ETHADDR |
| string "ethernet address" |
| default "04:25:fe:ed:00:18" |
| help |
| Target MAC address for the ethernet interface. |
| This should be changed for production units |
| |
| config BR2_TARGET_UBOOT_ETH1ADDR |
| string "ethernet 2 address" |
| help |
| Target MAC address for the second ethernet interface. |
| |
| endif # BR2_TARGET_UBOOT_NETWORK |
| |
| endif # BR2_TARGET_UBOOT |
