| /* |
| * Copyright (c) International Business Machines Corp., 2006 |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See |
| * the GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * Author: Artem Bityutskiy (Битюцкий Артём) |
| */ |
| |
| #ifndef __UBI_USER_H__ |
| #define __UBI_USER_H__ |
| |
| /* |
| * UBI device creation (the same as MTD device attachment) |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * MTD devices may be attached using %UBI_IOCATT ioctl command of the UBI |
| * control device. The caller has to properly fill and pass |
| * &struct ubi_attach_req object - UBI will attach the MTD device specified in |
| * the request and return the newly created UBI device number as the ioctl |
| * return value. |
| * |
| * UBI device deletion (the same as MTD device detachment) |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * An UBI device maybe deleted with %UBI_IOCDET ioctl command of the UBI |
| * control device. |
| * |
| * UBI volume creation |
| * ~~~~~~~~~~~~~~~~~~~ |
| * |
| * UBI volumes are created via the %UBI_IOCMKVOL IOCTL command of UBI character |
| * device. A &struct ubi_mkvol_req object has to be properly filled and a |
| * pointer to it has to be passed to the IOCTL. |
| * |
| * UBI volume deletion |
| * ~~~~~~~~~~~~~~~~~~~ |
| * |
| * To delete a volume, the %UBI_IOCRMVOL IOCTL command of the UBI character |
| * device should be used. A pointer to the 32-bit volume ID hast to be passed |
| * to the IOCTL. |
| * |
| * UBI volume re-size |
| * ~~~~~~~~~~~~~~~~~~ |
| * |
| * To re-size a volume, the %UBI_IOCRSVOL IOCTL command of the UBI character |
| * device should be used. A &struct ubi_rsvol_req object has to be properly |
| * filled and a pointer to it has to be passed to the IOCTL. |
| * |
| * UBI volume update |
| * ~~~~~~~~~~~~~~~~~ |
| * |
| * Volume update should be done via the %UBI_IOCVOLUP IOCTL command of the |
| * corresponding UBI volume character device. A pointer to a 64-bit update |
| * size should be passed to the IOCTL. After this, UBI expects user to write |
| * this number of bytes to the volume character device. The update is finished |
| * when the claimed number of bytes is passed. So, the volume update sequence |
| * is something like: |
| * |
| * fd = open("/dev/my_volume"); |
| * ioctl(fd, UBI_IOCVOLUP, &image_size); |
| * write(fd, buf, image_size); |
| * close(fd); |
| * |
| * Atomic eraseblock change |
| * ~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * Atomic eraseblock change operation is done via the %UBI_IOCEBCH IOCTL |
| * command of the corresponding UBI volume character device. A pointer to |
| * &struct ubi_leb_change_req has to be passed to the IOCTL. Then the user is |
| * expected to write the requested amount of bytes. This is similar to the |
| * "volume update" IOCTL. |
| */ |
| |
| /* |
| * When a new UBI volume or UBI device is created, users may either specify the |
| * volume/device number they want to create or to let UBI automatically assign |
| * the number using these constants. |
| */ |
| #define UBI_VOL_NUM_AUTO (-1) |
| #define UBI_DEV_NUM_AUTO (-1) |
| |
| /* Maximum volume name length */ |
| #define UBI_MAX_VOLUME_NAME 127 |
| |
| /* IOCTL commands of UBI character devices */ |
| |
| #define UBI_IOC_MAGIC 'o' |
| |
| /* Create an UBI volume */ |
| #define UBI_IOCMKVOL _IOW(UBI_IOC_MAGIC, 0, struct ubi_mkvol_req) |
| /* Remove an UBI volume */ |
| #define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, int32_t) |
| /* Re-size an UBI volume */ |
| #define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req) |
| |
| /* IOCTL commands of the UBI control character device */ |
| |
| #define UBI_CTRL_IOC_MAGIC 'o' |
| |
| /* Attach an MTD device */ |
| #define UBI_IOCATT _IOW(UBI_CTRL_IOC_MAGIC, 64, struct ubi_attach_req) |
| /* Detach an MTD device */ |
| #define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, int32_t) |
| |
| /* IOCTL commands of UBI volume character devices */ |
| |
| #define UBI_VOL_IOC_MAGIC 'O' |
| |
| /* Start UBI volume update */ |
| #define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, int64_t) |
| /* An eraseblock erasure command, used for debugging, disabled by default */ |
| #define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t) |
| /* An atomic eraseblock change command */ |
| #define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t) |
| |
| /* Maximum MTD device name length supported by UBI */ |
| #define MAX_UBI_MTD_NAME_LEN 127 |
| |
| /* |
| * UBI data type hint constants. |
| * |
| * UBI_LONGTERM: long-term data |
| * UBI_SHORTTERM: short-term data |
| * UBI_UNKNOWN: data persistence is unknown |
| * |
| * These constants are used when data is written to UBI volumes in order to |
| * help the UBI wear-leveling unit to find more appropriate physical |
| * eraseblocks. |
| */ |
| enum { |
| UBI_LONGTERM = 1, |
| UBI_SHORTTERM = 2, |
| UBI_UNKNOWN = 3, |
| }; |
| |
| /* |
| * UBI volume type constants. |
| * |
| * @UBI_DYNAMIC_VOLUME: dynamic volume |
| * @UBI_STATIC_VOLUME: static volume |
| */ |
| enum { |
| UBI_DYNAMIC_VOLUME = 3, |
| UBI_STATIC_VOLUME = 4, |
| }; |
| |
| /** |
| * struct ubi_attach_req - attach MTD device request. |
| * @ubi_num: UBI device number to create |
| * @mtd_num: MTD device number to attach |
| * @vid_hdr_offset: VID header offset (use defaults if %0) |
| * @padding: reserved for future, not used, has to be zeroed |
| * |
| * This data structure is used to specify MTD device UBI has to attach and the |
| * parameters it has to use. The number which should be assigned to the new UBI |
| * device is passed in @ubi_num. UBI may automatically assign the number if |
| * @UBI_DEV_NUM_AUTO is passed. In this case, the device number is returned in |
| * @ubi_num. |
| * |
| * Most applications should pass %0 in @vid_hdr_offset to make UBI use default |
| * offset of the VID header within physical eraseblocks. The default offset is |
| * the next min. I/O unit after the EC header. For example, it will be offset |
| * 512 in case of a 512 bytes page NAND flash with no sub-page support. Or |
| * it will be 512 in case of a 2KiB page NAND flash with 4 512-byte sub-pages. |
| * |
| * But in rare cases, if this optimizes things, the VID header may be placed to |
| * a different offset. For example, the boot-loader might do things faster if the |
| * VID header sits at the end of the first 2KiB NAND page with 4 sub-pages. As |
| * the boot-loader would not normally need to read EC headers (unless it needs |
| * UBI in RW mode), it might be faster to calculate ECC. This is weird example, |
| * but it real-life example. So, in this example, @vid_hdr_offer would be |
| * 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes |
| * aligned, which is OK, as UBI is clever enough to realize this is 4th sub-page |
| * of the first page and add needed padding. |
| */ |
| struct ubi_attach_req { |
| int32_t ubi_num; |
| int32_t mtd_num; |
| int32_t vid_hdr_offset; |
| uint8_t padding[12]; |
| }; |
| |
| /** |
| * struct ubi_mkvol_req - volume description data structure used in |
| * volume creation requests. |
| * @vol_id: volume number |
| * @alignment: volume alignment |
| * @bytes: volume size in bytes |
| * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME) |
| * @padding1: reserved for future, not used, has to be zeroed |
| * @name_len: volume name length |
| * @padding2: reserved for future, not used, has to be zeroed |
| * @name: volume name |
| * |
| * This structure is used by user-space programs when creating new volumes. The |
| * @used_bytes field is only necessary when creating static volumes. |
| * |
| * The @alignment field specifies the required alignment of the volume logical |
| * eraseblock. This means, that the size of logical eraseblocks will be aligned |
| * to this number, i.e., |
| * (UBI device logical eraseblock size) mod (@alignment) = 0. |
| * |
| * To put it differently, the logical eraseblock of this volume may be slightly |
| * shortened in order to make it properly aligned. The alignment has to be |
| * multiple of the flash minimal input/output unit, or %1 to utilize the entire |
| * available space of logical eraseblocks. |
| * |
| * The @alignment field may be useful, for example, when one wants to maintain |
| * a block device on top of an UBI volume. In this case, it is desirable to fit |
| * an integer number of blocks in logical eraseblocks of this UBI volume. With |
| * alignment it is possible to update this volume using plane UBI volume image |
| * BLOBs, without caring about how to properly align them. |
| */ |
| struct ubi_mkvol_req { |
| int32_t vol_id; |
| int32_t alignment; |
| int64_t bytes; |
| int8_t vol_type; |
| int8_t padding1; |
| int16_t name_len; |
| int8_t padding2[4]; |
| char name[UBI_MAX_VOLUME_NAME + 1]; |
| } __attribute__ ((packed)); |
| |
| /** |
| * struct ubi_rsvol_req - a data structure used in volume re-size requests. |
| * @vol_id: ID of the volume to re-size |
| * @bytes: new size of the volume in bytes |
| * |
| * Re-sizing is possible for both dynamic and static volumes. But while dynamic |
| * volumes may be re-sized arbitrarily, static volumes cannot be made to be |
| * smaller then the number of bytes they bear. To arbitrarily shrink a static |
| * volume, it must be wiped out first (by means of volume update operation with |
| * zero number of bytes). |
| */ |
| struct ubi_rsvol_req { |
| int64_t bytes; |
| int32_t vol_id; |
| } __attribute__ ((packed)); |
| |
| /** |
| * struct ubi_leb_change_req - a data structure used in atomic logical |
| * eraseblock change requests. |
| * @lnum: logical eraseblock number to change |
| * @bytes: how many bytes will be written to the logical eraseblock |
| * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) |
| * @padding: reserved for future, not used, has to be zeroed |
| */ |
| struct ubi_leb_change_req { |
| int32_t lnum; |
| int32_t bytes; |
| uint8_t dtype; |
| uint8_t padding[7]; |
| } __attribute__ ((packed)); |
| |
| /** |
| * ubi_attach_mtd_dev - attach an MTD device. |
| * @mtd_dev: MTD device description object |
| * @ubi_num: number to assign to the new UBI device |
| * @vid_hdr_offset: VID header offset |
| * |
| * This function attaches MTD device @mtd_dev to UBI and assign @ubi_num number |
| * to the newly created UBI device, unless @ubi_num is %UBI_DEV_NUM_AUTO, in |
| * which case this function finds a vacant device nubert and assings it |
| * automatically. Returns the new UBI device number in case of success and a |
| * negative error code in case of failure. |
| * |
| * This of course is originally not exported but is now part of the UBI |
| * interface to barebox. |
| */ |
| int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset); |
| |
| /** |
| * ubi_detach_mtd_dev - detach an MTD device. |
| * @ubi_num: UBI device number to detach from |
| * @anyway: detach MTD even if device reference count is not zero |
| * |
| * This function destroys an UBI device number @ubi_num and detaches the |
| * underlying MTD device. Returns zero in case of success and %-EBUSY if the |
| * UBI device is busy and cannot be destroyed, and %-EINVAL if it does not |
| * exist. |
| * |
| * This of course is originally not exported but is now part of the UBI |
| * interface to barebox. |
| */ |
| int ubi_detach_mtd_dev(struct mtd_info *mtd, int anyway); |
| |
| #endif /* __UBI_USER_H__ */ |