| if ARCH_S3C24xx |
| |
| config ARCH_TEXT_BASE |
| hex |
| default 0x31fc0000 |
| |
| config BOARDINFO |
| default "Mini 2440" if MACH_MINI2440 |
| default "Digi A9M2440" if MACH_A9M2440 |
| default "Digi A9M2410" if MACH_A9M2410 |
| |
| config CPU_S3C2410 |
| bool |
| |
| config CPU_S3C2440 |
| bool |
| |
| choice |
| |
| prompt "S3C24xx Board Type" |
| |
| config MACH_A9M2410 |
| bool "Digi A9M2410" |
| select CPU_S3C2410 |
| select MACH_HAS_LOWLEVEL_INIT |
| select S3C24XX_PLL_INIT |
| select S3C24XX_SDRAM_INIT |
| help |
| Say Y here if you are using Digi's Connect Core 9M equipped |
| with a Samsung S3C2410 Processor |
| |
| config MACH_A9M2440 |
| bool "Digi A9M2440" |
| select CPU_S3C2440 |
| select MACH_HAS_LOWLEVEL_INIT |
| select S3C24XX_PLL_INIT |
| help |
| Say Y here if you are using Digi's Connect Core 9M equipped |
| with a Samsung S3C2440 Processor |
| |
| config MACH_MINI2440 |
| bool "Mini 2440" |
| select CPU_S3C2440 |
| select MACH_HAS_LOWLEVEL_INIT |
| select MACH_DO_LOWLEVEL_INIT |
| select S3C24XX_PLL_INIT |
| select S3C24XX_SDRAM_INIT |
| select HAS_DM9000 |
| help |
| Say Y here if you are using Mini 2440 dev board equipped |
| with a Samsung S3C2440 Processor |
| |
| endchoice |
| |
| menu "Board specific settings " |
| |
| choice |
| prompt "A9M2440 baseboard" |
| depends on MACH_A9M2440 |
| |
| config MACH_A9M2410DEV |
| bool |
| prompt "A9M2410dev" |
| select HAS_CS8900 |
| help |
| Digi's evaluation board. |
| |
| endchoice |
| |
| endmenu |
| |
| menu "S3C24X0 Features " |
| |
| config S3C24XX_LOW_LEVEL_INIT |
| bool |
| |
| config S3C24XX_PLL_INIT |
| bool |
| prompt "Reconfigure PLL" |
| select S3C24XX_LOW_LEVEL_INIT |
| help |
| This adds generic code to reconfigure the internal PLL very early |
| after reset. |
| |
| config S3C24XX_SDRAM_INIT |
| bool |
| prompt "Initialize SDRAM" |
| select S3C24XX_LOW_LEVEL_INIT |
| help |
| This adds generic code to configure the SDRAM controller after reset. |
| The initialisation will be skipped if the code is already running |
| from SDRAM. |
| |
| config S3C24XX_NAND_BOOT |
| bool |
| prompt "Booting from NAND" |
| select MTD |
| select NAND |
| select NAND_S3C24X0 |
| help |
| Add generic support to boot from NAND flash. Image loading will be |
| skipped if the code is running from NOR or already from SDRAM. |
| |
| endmenu |
| |
| endif |
