| if ARCH_AT91 |
| |
| config ARCH_TEXT_BASE |
| hex |
| default 0x73f00000 if ARCH_AT91SAM9G45 |
| default 0x23f00000 |
| |
| config BOARDINFO |
| default "Atmel 91SAM9260-EK" if MACH_AT91SAM9260EK |
| default "Atmel at91sam9261-ek" if MACH_AT91SAM9261EK |
| default "Atmel at91sam9263-ek" if MACH_AT91SAM9263EK |
| default "Atmel at91sam9g10-ek" if MACH_AT91SAM9G10EK |
| default "Atmel at91sam9g20-ek" if MACH_AT91SAM9G20EK |
| default "Atmel at91sam9m10g45-ek" if MACH_AT91SAM9M10G45EK |
| default "Bucyrus MMC-CPU" if MACH_MMCCPU |
| default "Ronetix PM9261" if MACH_PM9261 |
| default "Ronetix PM9263" if MACH_PM9263 |
| default "Ronetix PM9G45" if MACH_PM9G45 |
| |
| config HAVE_NAND_ATMEL_BUSWIDTH_16 |
| bool |
| |
| comment "Atmel AT91 System-on-Chip" |
| |
| choice |
| prompt "Atmel AT91 Processor" |
| |
| config ARCH_AT91SAM9260 |
| bool "AT91SAM9260" |
| select CPU_ARM926T |
| select HAS_MACB |
| |
| config ARCH_AT91SAM9261 |
| bool "AT91SAM9261" |
| select CPU_ARM926T |
| |
| config ARCH_AT91SAM9263 |
| bool "AT91SAM9263" |
| select CPU_ARM926T |
| select HAS_MACB |
| |
| config ARCH_AT91SAM9G10 |
| bool "AT91SAM9G10" |
| select CPU_ARM926T |
| |
| config ARCH_AT91SAM9G20 |
| bool "AT91SAM9G20" |
| select CPU_ARM926T |
| select HAS_MACB |
| |
| config ARCH_AT91SAM9G45 |
| bool "AT91SAM9G45 or AT91SAM9M10" |
| select CPU_ARM926T |
| select HAS_MACB |
| |
| endchoice |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9260 |
| |
| choice |
| |
| prompt "AT91SAM9260 Board Type" |
| |
| config MACH_AT91SAM9260EK |
| bool "Atmel AT91SAM9260-EK" |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Say y here if you are using Atmel's AT91SAM9260-EK Evaluation board |
| |
| endchoice |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9261 |
| |
| choice |
| prompt "AT91SAM9261 Board Type" |
| |
| config MACH_AT91SAM9261EK |
| bool "Atmel AT91SAM9261-EK Evaluation Kit" |
| select HAS_DM9000 |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> |
| |
| config MACH_PM9261 |
| bool "Ronetix PM9261" |
| select HAS_DM9000 |
| select MACH_HAS_LOWLEVEL_INIT |
| help |
| Say y here if you are using the Ronetix PM9261 Board |
| |
| endchoice |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9G10 |
| |
| choice |
| prompt "AT91SAM9G10 Board Type" |
| |
| config MACH_AT91SAM9G10EK |
| bool "Atmel AT91SAM9G10-EK Evaluation Kit" |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| select HAS_DM9000 |
| help |
| Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> |
| |
| endchoice |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9G20 |
| |
| choice |
| |
| prompt "AT91SAM9G20 Board Type" |
| |
| config MACH_AT91SAM9G20EK |
| bool "Atmel AT91SAM9G20-EK Evaluation Kit" |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit |
| that embeds only one SD/MMC slot. |
| |
| endchoice |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9263 |
| |
| choice |
| prompt "AT91SAM9263 Board Type" |
| |
| config MACH_AT91SAM9263EK |
| bool "Atmel AT91SAM9263-EK" |
| select MACH_HAS_LOWLEVEL_INIT |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Say y here if you are using Atmel's AT91SAM9263-EK Evaluation board |
| |
| config MACH_MMCCPU |
| bool "Bucyrus MMC-CPU" |
| help |
| Say y here if you are using the Bucyrus MMC-CPU |
| |
| config MACH_PM9263 |
| bool "Ronetix PM9263" |
| select MACH_HAS_LOWLEVEL_INIT |
| help |
| Say y here if you are using the Ronetix PM9263 Board |
| |
| endchoice |
| |
| endif |
| |
| if ARCH_AT91SAM9G45 |
| |
| choice |
| prompt "AT91SAM9G45 or AT91SAM9M10 Board Type" |
| |
| config MACH_AT91SAM9M10G45EK |
| bool "Atmel AT91SAM9M10G45-EK Evaluation Kit" |
| select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit |
| or AT91SAM9G45-EKES or AT91SAM9M10-EKES (for those 2 select the LG LCD) |
| <http://atmel.com/dyn/products/tools_card_v2.asp?tool_id=4735> |
| |
| config MACH_PM9G45 |
| bool "Ronetix PM9G45" |
| help |
| Say y here if you are using the Ronetix PM9G45 Board |
| |
| endchoice |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| comment "AT91 Board Options" |
| |
| config MTD_NAND_ATMEL_BUSWIDTH_16 |
| bool "Enable 16-bit data bus interface to NAND flash" |
| depends on HAVE_NAND_ATMEL_BUSWIDTH_16 |
| help |
| On AT91SAM926x boards both types of NAND flash can be present |
| (8 and 16 bit data bus width). |
| |
| config AT91_HAVE_2MMC |
| bool "Have 2 MMC" |
| depends on MACH_AT91SAM9G20EK |
| help |
| Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit |
| with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and |
| onwards. |
| |
| choice |
| prompt "LCD type" |
| depends on MACH_AT91SAM9M10G45EK |
| |
| config LCD_TRULY_TFT1N4633E |
| bool "truly TFT1N4633-E" |
| help |
| Found on AT91SAM9M10G45-EK |
| |
| config LCD_LG_LB043WQ1 |
| bool "LG philips LB043WQ1" |
| help |
| Found on AT91SAM9G45-EKES and AT91SAM9M10-EKES |
| |
| endchoice |
| |
| endif |
