| VERSION = 2011 |
| PATCHLEVEL = 06 |
| SUBLEVEL = 0 |
| EXTRAVERSION = |
| NAME = Amissive Actinocutious Kiwi |
| |
| # *DOCUMENTATION* |
| # To see a list of typical targets execute "make help" |
| # More info can be located in ./README |
| # Comments in this file are targeted only to the developer, do not |
| # expect to learn how to build the kernel reading this file. |
| |
| # Do not: |
| # o use make's built-in rules and variables |
| # (this increases performance and avoid hard-to-debug behavour); |
| # o print "Entering directory ..."; |
| MAKEFLAGS += -rR --no-print-directory |
| |
| # We are using a recursive build, so we need to do a little thinking |
| # to get the ordering right. |
| # |
| # Most importantly: sub-Makefiles should only ever modify files in |
| # their own directory. If in some directory we have a dependency on |
| # a file in another dir (which doesn't happen often, but it's often |
| # unavoidable when linking the built-in.o targets which finally |
| # turn into barebox), we will call a sub make in that other dir, and |
| # after that we are sure that everything which is in that other dir |
| # is now up to date. |
| # |
| # The only cases where we need to modify files which have global |
| # effects are thus separated out and done before the recursive |
| # descending is started. They are now explicitly listed as the |
| # prepare rule. |
| |
| # To put more focus on warnings, be less verbose as default |
| # Use 'make V=1' to see the full commands |
| |
| ifdef V |
| ifeq ("$(origin V)", "command line") |
| KBUILD_VERBOSE = $(V) |
| endif |
| endif |
| ifndef KBUILD_VERBOSE |
| KBUILD_VERBOSE = 0 |
| endif |
| |
| # Call a source code checker (by default, "sparse") as part of the |
| # C compilation. |
| # |
| # Use 'make C=1' to enable checking of only re-compiled files. |
| # Use 'make C=2' to enable checking of *all* source files, regardless |
| # of whether they are re-compiled or not. |
| # |
| # See the file "Documentation/sparse.txt" for more details, including |
| # where to get the "sparse" utility. |
| |
| ifdef C |
| ifeq ("$(origin C)", "command line") |
| KBUILD_CHECKSRC = $(C) |
| endif |
| endif |
| ifndef KBUILD_CHECKSRC |
| KBUILD_CHECKSRC = 0 |
| endif |
| |
| # Use make M=dir to specify directory of external module to build |
| # Old syntax make ... SUBDIRS=$PWD is still supported |
| # Setting the environment variable KBUILD_EXTMOD take precedence |
| ifdef SUBDIRS |
| KBUILD_EXTMOD ?= $(SUBDIRS) |
| endif |
| ifdef M |
| ifeq ("$(origin M)", "command line") |
| KBUILD_EXTMOD := $(M) |
| endif |
| endif |
| |
| |
| # kbuild supports saving output files in a separate directory. |
| # To locate output files in a separate directory two syntaxes are supported. |
| # In both cases the working directory must be the root of the kernel src. |
| # 1) O= |
| # Use "make O=dir/to/store/output/files/" |
| # |
| # 2) Set KBUILD_OUTPUT |
| # Set the environment variable KBUILD_OUTPUT to point to the directory |
| # where the output files shall be placed. |
| # export KBUILD_OUTPUT=dir/to/store/output/files/ |
| # make |
| # |
| # The O= assignment takes precedence over the KBUILD_OUTPUT environment |
| # variable. |
| |
| |
| # KBUILD_SRC is set on invocation of make in OBJ directory |
| # KBUILD_SRC is not intended to be used by the regular user (for now) |
| ifeq ($(KBUILD_SRC),) |
| |
| # OK, Make called in directory where kernel src resides |
| # Do we want to locate output files in a separate directory? |
| ifdef O |
| ifeq ("$(origin O)", "command line") |
| KBUILD_OUTPUT := $(O) |
| endif |
| endif |
| |
| # That's our default target when none is given on the command line |
| PHONY := _all |
| _all: |
| |
| ifneq ($(KBUILD_OUTPUT),) |
| # Invoke a second make in the output directory, passing relevant variables |
| # check that the output directory actually exists |
| saved-output := $(KBUILD_OUTPUT) |
| KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd) |
| $(if $(KBUILD_OUTPUT),, \ |
| $(error output directory "$(saved-output)" does not exist)) |
| |
| PHONY += $(MAKECMDGOALS) |
| |
| $(filter-out _all,$(MAKECMDGOALS)) _all: |
| $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ |
| KBUILD_SRC=$(CURDIR) \ |
| KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@ |
| |
| # Leave processing to above invocation of make |
| skip-makefile := 1 |
| endif # ifneq ($(KBUILD_OUTPUT),) |
| endif # ifeq ($(KBUILD_SRC),) |
| |
| # We process the rest of the Makefile if this is the final invocation of make |
| ifeq ($(skip-makefile),) |
| |
| # If building an external module we do not care about the all: rule |
| # but instead _all depend on modules |
| PHONY += all |
| _all: all |
| |
| srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) |
| objtree := $(CURDIR) |
| src := $(srctree) |
| obj := $(objtree) |
| |
| VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) |
| |
| export srctree objtree VPATH |
| |
| # Cross compiling and selecting different set of gcc/bin-utils |
| # --------------------------------------------------------------------------- |
| # |
| # When performing cross compilation for other architectures ARCH shall be set |
| # to the target architecture. (See arch/* for the possibilities). |
| # ARCH can be set during invocation of make: |
| # make ARCH=ia64 |
| # Another way is to have ARCH set in the environment. |
| # The default ARCH is the host where make is executed. |
| |
| # CROSS_COMPILE specify the prefix used for all executables used |
| # during compilation. Only gcc and related bin-utils executables |
| # are prefixed with $(CROSS_COMPILE). |
| # CROSS_COMPILE can be set on the command line |
| # make CROSS_COMPILE=ia64-linux- |
| # Alternatively CROSS_COMPILE can be set in the environment. |
| # Default value for CROSS_COMPILE is not to prefix executables |
| |
| ARCH ?= arm |
| CROSS_COMPILE ?= arm-linux- |
| |
| # Architecture as present in compile.h |
| UTS_MACHINE := $(ARCH) |
| SRCARCH := $(ARCH) |
| |
| KCONFIG_CONFIG ?= .config |
| |
| # SHELL used by kbuild |
| CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ |
| else if [ -x /bin/bash ]; then echo /bin/bash; \ |
| else echo sh; fi ; fi) |
| |
| HOSTCC = gcc |
| HOSTCXX = g++ |
| HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer |
| HOSTCXXFLAGS = -O2 |
| |
| # Decide whether to build built-in, modular, or both. |
| # Normally, just do built-in. |
| |
| KBUILD_MODULES := |
| KBUILD_BUILTIN := 1 |
| |
| # If we have only "make modules", don't compile built-in objects. |
| # When we're building modules with modversions, we need to consider |
| # the built-in objects during the descend as well, in order to |
| # make sure the checksums are up to date before we record them. |
| |
| ifeq ($(MAKECMDGOALS),modules) |
| KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) |
| endif |
| |
| # If we have "make <whatever> modules", compile modules |
| # in addition to whatever we do anyway. |
| # Just "make" or "make all" shall build modules as well |
| |
| ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) |
| KBUILD_MODULES := 1 |
| endif |
| |
| export KBUILD_MODULES KBUILD_BUILTIN |
| export KBUILD_CHECKSRC KBUILD_SRC |
| |
| # Beautify output |
| # --------------------------------------------------------------------------- |
| # |
| # Normally, we echo the whole command before executing it. By making |
| # that echo $($(quiet)$(cmd)), we now have the possibility to set |
| # $(quiet) to choose other forms of output instead, e.g. |
| # |
| # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ |
| # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< |
| # |
| # If $(quiet) is empty, the whole command will be printed. |
| # If it is set to "quiet_", only the short version will be printed. |
| # If it is set to "silent_", nothing will be printed at all, since |
| # the variable $(silent_cmd_cc_o_c) doesn't exist. |
| # |
| # A simple variant is to prefix commands with $(Q) - that's useful |
| # for commands that shall be hidden in non-verbose mode. |
| # |
| # $(Q)ln $@ :< |
| # |
| # If KBUILD_VERBOSE equals 0 then the above command will be hidden. |
| # If KBUILD_VERBOSE equals 1 then the above command is displayed. |
| |
| ifeq ($(KBUILD_VERBOSE),1) |
| quiet = |
| Q = |
| else |
| quiet=quiet_ |
| Q = @ |
| endif |
| |
| # If the user is running make -s (silent mode), suppress echoing of |
| # commands |
| |
| ifneq ($(findstring s,$(MAKEFLAGS)),) |
| quiet=silent_ |
| endif |
| |
| export quiet Q KBUILD_VERBOSE |
| |
| |
| # Look for make include files relative to root of kernel src |
| MAKEFLAGS += --include-dir=$(srctree) |
| |
| # We need some generic definitions. |
| include $(srctree)/scripts/Kbuild.include |
| |
| # Make variables (CC, etc...) |
| |
| AS = $(CROSS_COMPILE)as |
| LD = $(CROSS_COMPILE)ld |
| CC = $(CROSS_COMPILE)gcc |
| CPP = $(CC) -E |
| AR = $(CROSS_COMPILE)ar |
| NM = $(CROSS_COMPILE)nm |
| STRIP = $(CROSS_COMPILE)strip |
| OBJCOPY = $(CROSS_COMPILE)objcopy |
| OBJDUMP = $(CROSS_COMPILE)objdump |
| AWK = awk |
| GENKSYMS = scripts/genksyms/genksyms |
| DEPMOD = /sbin/depmod |
| KALLSYMS = scripts/kallsyms |
| PERL = perl |
| CHECK = sparse |
| |
| CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -Wbitwise $(CF) |
| CFLAGS_KERNEL = |
| AFLAGS_KERNEL = |
| |
| LDFLAGS_MODULE = -T common/module.lds |
| |
| # When compiling out-of-tree modules, put MODVERDIR in the module |
| # tree rather than in the kernel tree. The kernel tree might |
| # even be read-only. |
| export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions |
| |
| # Use LINUXINCLUDE when you must reference the include/ directory. |
| # Needed to be compatible with the O= option |
| LINUXINCLUDE := -Iinclude \ |
| $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \ |
| -I$(srctree)/arch/$(ARCH)/include \ |
| -I$(objtree)/arch/$(ARCH)/include \ |
| -include include/generated/autoconf.h |
| |
| PFEINCLUDE := -I$(objtree)/drivers/net/comcerto |
| |
| CPPFLAGS := -D__KERNEL__ -D__BAREBOX__ $(LINUXINCLUDE) $(PFEINCLUDE) -fno-builtin -ffreestanding |
| |
| CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ |
| -fno-strict-aliasing -fno-common -Os -pipe |
| AFLAGS := -D__ASSEMBLY__ |
| |
| LDFLAGS := -Map barebox.map |
| |
| # Read KERNELRELEASE from include/config/kernel.release (if it exists) |
| KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) |
| KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) |
| |
| export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION |
| export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC |
| export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE |
| export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS |
| |
| export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS |
| export CFLAGS CFLAGS_KERNEL |
| export AFLAGS AFLAGS_KERNEL |
| |
| # Files to ignore in find ... statements |
| |
| RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o |
| export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git |
| |
| # =========================================================================== |
| # Rules shared between *config targets and build targets |
| |
| # Basic helpers built in scripts/ |
| PHONY += scripts_basic |
| scripts_basic: |
| $(Q)$(MAKE) $(build)=scripts/basic |
| |
| # To avoid any implicit rule to kick in, define an empty command. |
| scripts/basic/%: scripts_basic ; |
| |
| PHONY += outputmakefile |
| # outputmakefile generates a Makefile in the output directory, if using a |
| # separate output directory. This allows convenient use of make in the |
| # output directory. |
| outputmakefile: |
| ifneq ($(KBUILD_SRC),) |
| $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ |
| $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) |
| endif |
| |
| # To make sure we do not include .config for any of the *config targets |
| # catch them early, and hand them over to scripts/kconfig/Makefile |
| # It is allowed to specify more targets when calling make, including |
| # mixing *config targets and build targets. |
| # For example 'make oldconfig all'. |
| # Detect when mixed targets is specified, and make a second invocation |
| # of make so .config is not included in this case either (for *config). |
| |
| no-dot-config-targets := clean mrproper distclean \ |
| cscope TAGS tags help %docs check% \ |
| include/generated/version.h headers_% \ |
| kernelrelease kernelversion |
| |
| config-targets := 0 |
| mixed-targets := 0 |
| dot-config := 1 |
| |
| ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) |
| ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) |
| dot-config := 0 |
| endif |
| endif |
| |
| ifneq ($(filter config %config,$(MAKECMDGOALS)),) |
| config-targets := 1 |
| ifneq ($(filter-out config %config,$(MAKECMDGOALS)),) |
| mixed-targets := 1 |
| endif |
| endif |
| |
| ifeq ($(mixed-targets),1) |
| # =========================================================================== |
| # We're called with mixed targets (*config and build targets). |
| # Handle them one by one. |
| |
| %:: FORCE |
| $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@ |
| |
| else |
| ifeq ($(config-targets),1) |
| # =========================================================================== |
| # *config targets only - make sure prerequisites are updated, and descend |
| # in scripts/kconfig to make the *config target |
| |
| # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. |
| # KBUILD_DEFCONFIG may point out an alternative default configuration |
| # used for 'make defconfig' |
| include $(srctree)/arch/$(ARCH)/Makefile |
| export KBUILD_DEFCONFIG |
| |
| config: scripts_basic outputmakefile FORCE |
| $(Q)mkdir -p include/linux include/config |
| $(Q)$(MAKE) $(build)=scripts/kconfig $@ |
| |
| %config: scripts_basic outputmakefile FORCE |
| $(Q)mkdir -p include/linux include/config |
| $(Q)$(MAKE) $(build)=scripts/kconfig $@ |
| |
| else |
| # =========================================================================== |
| # Build targets only - this includes barebox, arch specific targets, clean |
| # targets and others. In general all targets except *config targets. |
| |
| # Additional helpers built in scripts/ |
| # Carefully list dependencies so we do not try to build scripts twice |
| # in parallel |
| PHONY += scripts |
| scripts: scripts_basic include/config/auto.conf |
| $(Q)$(MAKE) $(build)=$(@) |
| |
| ifeq ($(dot-config),1) |
| # Read in config |
| -include include/config/auto.conf |
| |
| # Read in dependencies to all Kconfig* files, make sure to run |
| # oldconfig if changes are detected. |
| -include include/config/auto.conf.cmd |
| |
| # To avoid any implicit rule to kick in, define an empty command |
| $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; |
| |
| # If .config is newer than include/config/auto.conf, someone tinkered |
| # with it and forgot to run make oldconfig. |
| # if auto.conf.cmd is missing then we are probably in a cleaned tree so |
| # we execute the config step to be sure to catch updated Kconfig files |
| include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd |
| $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig |
| |
| else |
| # Dummy target needed, because used as prerequisite |
| include/config/auto.conf: ; |
| endif # $(dot-config) |
| |
| # Objects we will link into barebox / subdirs we need to visit |
| ifdef CONFIG_COMCERTO_DIAG |
| common-y := common/ drivers/ commands/ lib/ net/ fs/ diags/ |
| else |
| common-y := common/ drivers/ commands/ lib/ net/ fs/ |
| endif |
| |
| # The all: target is the default when no target is given on the |
| # command line. |
| # This allow a user to issue only 'make' to build a kernel |
| # Defaults barebox but it is usually overridden in the arch makefile |
| ifeq ($(CONFIG_COMCERTO_ULOADER)$(CONFIG_COMCERTO_NAND_ULOADER),y) |
| all: barebox-unsigned.bin uloader.bin |
| else |
| all: barebox.bin |
| endif |
| |
| include $(srctree)/arch/$(ARCH)/Makefile |
| |
| ifdef CONFIG_DEBUG_INFO |
| CFLAGS += -g |
| endif |
| |
| # Force gcc to behave correct even for buggy distributions |
| CFLAGS += $(call cc-option, -fno-stack-protector) |
| |
| # arch Makefile may override CC so keep this after arch Makefile is included |
| NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) |
| CHECKFLAGS += $(NOSTDINC_FLAGS) |
| |
| # warn about C99 declaration after statement |
| CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) |
| |
| # disable pointer signed / unsigned warnings in gcc 4.0 |
| CFLAGS += $(call cc-option,-Wno-pointer-sign,) |
| |
| # Default kernel image to build when no specific target is given. |
| # KBUILD_IMAGE may be overruled on the command line or |
| # set in the environment |
| # Also any assignments in arch/$(ARCH)/Makefile take precedence over |
| # this default value |
| export KBUILD_IMAGE ?= barebox |
| |
| barebox-dirs := $(patsubst %/,%,$(filter %/, $(common-y))) |
| |
| barebox-alldirs := $(sort $(barebox-dirs) $(patsubst %/,%,$(filter %/, \ |
| $(common-n) $(common-) \ |
| $(core-n) $(core-) $(drivers-n) $(drivers-) \ |
| $(net-n) $(net-) $(libs-n) $(libs-)))) |
| |
| common-y := $(patsubst %/, %/built-in.o, $(common-y)) |
| |
| # Build barebox |
| # --------------------------------------------------------------------------- |
| # barebox is built from the objects selected by $(barebox-init) and |
| # $(barebox-main). Most are built-in.o files from top-level directories |
| # in the kernel tree, others are specified in arch/$(ARCH)Makefile. |
| # Ordering when linking is important, and $(barebox-init) must be first. |
| # |
| # FIXME: This picture is wrong for barebox. We have no init, driver, mm |
| # |
| # barebox |
| # ^ |
| # | |
| # +-< $(barebox-init) |
| # | +--< init/version.o + more |
| # | |
| # +--< $(barebox-main) |
| # | +--< driver/built-in.o mm/built-in.o + more |
| # | |
| # +-< kallsyms.o (see description in CONFIG_KALLSYMS section) |
| # |
| # barebox version cannot be updated during normal |
| # descending-into-subdirs phase since we do not yet know if we need to |
| # update barebox. |
| # |
| # System.map is generated to document addresses of all kernel symbols |
| |
| barebox-common := $(common-y) |
| barebox-all := $(barebox-common) |
| barebox-lds := $(lds-y) |
| |
| # Rule to link barebox |
| # May be overridden by arch/$(ARCH)/Makefile |
| quiet_cmd_barebox__ ?= LD $@ |
| cmd_barebox__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_barebox) -o $@ \ |
| -T $(barebox-lds) $(barebox-head) \ |
| --start-group $(barebox-common) --end-group \ |
| $(filter-out $(barebox-lds) $(barebox-common) FORCE ,$^) |
| |
| # Generate new barebox version |
| quiet_cmd_barebox_version = GEN .version |
| cmd_barebox_version = set -e; \ |
| if [ ! -r .version ]; then \ |
| rm -f .version; \ |
| echo 1 >.version; \ |
| else \ |
| mv .version .old_version; \ |
| expr 0$$(cat .old_version) + 1 >.version; \ |
| fi; \ |
| |
| |
| # Generate System.map |
| quiet_cmd_sysmap = SYSMAP |
| cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap |
| |
| # Link of barebox |
| # Generate System.map and verify that the content is consistent |
| # Use + in front of the barebox_version rule to silent warning with make -j2 |
| # First command is ':' to allow us to use + in front of the rule |
| define rule_barebox__ |
| : |
| |
| $(call cmd,barebox__) |
| |
| $(Q)echo 'cmd_$@ := $(cmd_barebox__)' > $(@D)/.$(@F).cmd |
| |
| $(Q)$(if $($(quiet)cmd_sysmap), \ |
| echo ' $($(quiet)cmd_sysmap) System.map' &&) \ |
| $(cmd_sysmap) $@ System.map; \ |
| if [ $$? -ne 0 ]; then \ |
| rm -f $@; \ |
| /bin/false; \ |
| fi; |
| endef |
| |
| ifdef CONFIG_KALLSYMS |
| # Generate section listing all symbols and add it into barebox $(kallsyms.o) |
| # It's a three stage process: |
| # o .tmp_barebox1 has all symbols and sections, but __kallsyms is |
| # empty |
| # Running kallsyms on that gives us .tmp_kallsyms1.o with |
| # the right size - barebox version is updated during this step |
| # o .tmp_barebox2 now has a __kallsyms section of the right size, |
| # but due to the added section, some addresses have shifted. |
| # From here, we generate a correct .tmp_kallsyms2.o |
| # o The correct .tmp_kallsyms2.o is linked into the final barebox. |
| # o Verify that the System.map from barebox matches the map from |
| # .tmp_barebox2, just in case we did not generate kallsyms correctly. |
| # o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using |
| # .tmp_barebox3 and .tmp_kallsyms3.o. This is only meant as a |
| # temporary bypass to allow the kernel to be built while the |
| # maintainers work out what went wrong with kallsyms. |
| |
| ifdef CONFIG_KALLSYMS_EXTRA_PASS |
| last_kallsyms := 3 |
| else |
| last_kallsyms := 2 |
| endif |
| |
| kallsyms.o := .tmp_kallsyms$(last_kallsyms).o |
| |
| define verify_kallsyms |
| $(Q)$(if $($(quiet)cmd_sysmap), \ |
| echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \ |
| $(cmd_sysmap) .tmp_barebox$(last_kallsyms) .tmp_System.map |
| $(Q)cmp -s System.map .tmp_System.map || \ |
| (echo Inconsistent kallsyms data; \ |
| echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \ |
| rm .tmp_kallsyms* ; /bin/false ) |
| endef |
| |
| # Update barebox version before link |
| # Use + in front of this rule to silent warning about make -j1 |
| # First command is ':' to allow us to use + in front of this rule |
| cmd_ksym_ld = $(cmd_barebox__) |
| define rule_ksym_ld |
| : |
| +$(call cmd,barebox_version) |
| $(call cmd,barebox__) |
| $(Q)echo 'cmd_$@ := $(cmd_barebox__)' > $(@D)/.$(@F).cmd |
| endef |
| |
| # Generate .S file with all kernel symbols |
| quiet_cmd_kallsyms = KSYM $@ |
| cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) --all-symbols > $@ |
| |
| .tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE |
| $(call if_changed_dep,as_o_S) |
| |
| .tmp_kallsyms%.S: .tmp_barebox% $(KALLSYMS) |
| $(call cmd,kallsyms) |
| |
| # .tmp_barebox1 must be complete except kallsyms, so update barebox version |
| .tmp_barebox1: $(barebox-lds) $(barebox-all) FORCE |
| $(call if_changed_rule,ksym_ld) |
| |
| .tmp_barebox2: $(barebox-lds) $(barebox-all) .tmp_kallsyms1.o FORCE |
| $(call if_changed,barebox__) |
| |
| .tmp_barebox3: $(barebox-lds) $(barebox-all) .tmp_kallsyms2.o FORCE |
| $(call if_changed,barebox__) |
| |
| # Needs to visit scripts/ before $(KALLSYMS) can be used. |
| $(KALLSYMS): scripts ; |
| |
| # Generate some data for debugging strange kallsyms problems |
| debug_kallsyms: .tmp_map$(last_kallsyms) |
| |
| .tmp_map%: .tmp_barebox% FORCE |
| ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@ |
| |
| .tmp_map3: .tmp_map2 |
| |
| .tmp_map2: .tmp_map1 |
| |
| endif # ifdef CONFIG_KALLSYMS |
| |
| # Do modpost on a prelinked vmlinux. The finally linked vmlinux has |
| # relevant sections renamed as per the linker script. |
| quiet_cmd_barebox-modpost = LD $@ |
| cmd_barebox-modpost = $(LD) $(LDFLAGS) -r -o $@ \ |
| $(vmlinux-init) --start-group $(barebox-main) --end-group \ |
| $(filter-out $(barebox-init) $(barebox-main) $(barebox-lds) FORCE ,$^) |
| define rule_barebox-modpost |
| : |
| +$(call cmd,barebox-modpost) |
| $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@ |
| $(Q)echo 'cmd_$@ := $(cmd_barebox-modpost)' > $(dot-target).cmd |
| endef |
| |
| quiet_cmd_objcopy = OBJCOPY $@ |
| cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ |
| |
| OBJCOPYFLAGS_barebox-unsigned.bin = -O binary |
| |
| barebox.bin: barebox-unsigned.bin |
| ifdef CONFIG_PROD |
| $(shell ../../vendor/google/platform/signing/mindspeed/sign_image.py \ |
| -i barebox-unsigned.bin -k gfiber_barebox_private.pem -o barebox.bin; \ |
| rm -f barebox-unsigned.bin) |
| else |
| $(shell echo -ne "\x00\x00\x00\x00\x00\x00\x00\x00" > barebox.bin; \ |
| echo -ne "\x00\x00\x00\x00\x00\x00\x00\x00" >> barebox.bin; \ |
| cat barebox-unsigned.bin >> barebox.bin; rm -f barebox-unsigned.bin) |
| endif |
| |
| barebox-unsigned.bin: barebox FORCE |
| $(call if_changed,objcopy) |
| |
| uloader.bin: uloader |
| |
| uloader: barebox-unsigned.bin |
| $(shell mv barebox-unsigned.bin ./tools/ImageGenarator/barebox.bin; \ |
| cd $(srctree)/tools/ImageGenarator/; \ |
| chmod 755 *.sh; ./uldr_gen.sh 1>/dev/null;) |
| |
| |
| ifdef CONFIG_X86 |
| barebox.S: barebox |
| ifdef CONFIG_X86_HDBOOT |
| @echo "-------------------------------------------------" > barebox.S |
| @echo " * MBR content" >> barebox.S |
| $(Q)$(OBJDUMP) -j .bootsector -mi8086 -d barebox >> barebox.S |
| @echo "-------------------------------------------------" >> barebox.S |
| @echo " * Boot loader content" >> barebox.S |
| $(Q)$(OBJDUMP) -j .bootstrapping -mi8086 -d barebox >> barebox.S |
| endif |
| @echo "-------------------------------------------------" >> barebox.S |
| @echo " * Regular Text content" >> barebox.S |
| $(Q)$(OBJDUMP) -j .text -d barebox >> barebox.S |
| @echo "-------------------------------------------------" >> barebox.S |
| @echo " * Regular Data content" >> barebox.S |
| $(Q)$(OBJDUMP) -j .data -d barebox >> barebox.S |
| @echo "-------------------------------------------------" >> barebox.S |
| @echo " * Commands content" >> barebox.S |
| $(Q)$(OBJDUMP) -j .barebox_cmd -d barebox >> barebox.S |
| @echo "-------------------------------------------------" >> barebox.S |
| @echo " * Init Calls content" >> barebox.S |
| $(Q)$(OBJDUMP) -j .barebox_initcalls -d barebox >> barebox.S |
| else |
| quiet_cmd_disasm = DISASM $@ |
| cmd_disasm = $(OBJDUMP) -d $< > $@ |
| |
| barebox.S: barebox FORCE |
| $(call if_changed,disasm) |
| endif |
| |
| # barebox image |
| barebox: $(barebox-lds) $(barebox-head) $(barebox-common) $(kallsyms.o) FORCE |
| $(call barebox-modpost) |
| $(call if_changed_rule,barebox__) |
| $(Q)rm -f .old_version |
| |
| # The actual objects are generated when descending, |
| # make sure no implicit rule kicks in |
| $(sort $(barebox-head) $(barebox-common) ) $(barebox-lds): $(barebox-dirs) ; |
| |
| # Handle descending into subdirectories listed in $(barebox-dirs) |
| # Preset locale variables to speed up the build process. Limit locale |
| # tweaks to this spot to avoid wrong language settings when running |
| # make menuconfig etc. |
| # Error messages still appears in the original language |
| |
| PHONY += $(barebox-dirs) |
| $(barebox-dirs): prepare scripts pfe_fw-prepare |
| $(Q)$(MAKE) $(build)=$@ |
| |
| pfe_fw-prepare: scripts |
| ifneq ($(KBUILD_MODULES),) |
| ln -fsn $(srctree)/fw fw; |
| endif |
| ifdef CONFIG_COMCERTO_DIAG |
| $(MAKE) -s -f $(srctree)/fw/Makefile CONFIG_COMCERTO_DIAG=1 |
| else |
| $(MAKE) -s -f $(srctree)/fw/Makefile |
| endif |
| |
| |
| # Build the kernel release string |
| # |
| # The KERNELRELEASE value built here is stored in the file |
| # include/config/kernel.release, and is used when executing several |
| # make targets, such as "make install" or "make modules_install." |
| # |
| # The eventual kernel release string consists of the following fields, |
| # shown in a hierarchical format to show how smaller parts are concatenated |
| # to form the larger and final value, with values coming from places like |
| # the Makefile, kernel config options, make command line options and/or |
| # SCM tag information. |
| # |
| # $(KERNELVERSION) |
| # $(VERSION) eg, 2 |
| # $(PATCHLEVEL) eg, 6 |
| # $(SUBLEVEL) eg, 18 |
| # $(EXTRAVERSION) eg, -rc6 |
| # $(localver-full) |
| # $(localver) |
| # localversion* (all localversion* files) |
| # $(CONFIG_LOCALVERSION) (from kernel config setting) |
| # $(localver-auto) (only if CONFIG_LOCALVERSION_AUTO is set) |
| # ./scripts/setlocalversion (SCM tag, if one exists) |
| # $(LOCALVERSION) (from make command line if provided) |
| # |
| # Note how the final $(localver-auto) string is included *only* if the |
| # kernel config option CONFIG_LOCALVERSION_AUTO is selected. Also, at the |
| # moment, only git is supported but other SCMs can edit the script |
| # scripts/setlocalversion and add the appropriate checks as needed. |
| |
| nullstring := |
| space := $(nullstring) # end of line |
| |
| ___localver = $(objtree)/localversion* $(srctree)/localversion* |
| __localver = $(sort $(wildcard $(___localver))) |
| # skip backup files (containing '~') |
| _localver = $(foreach f, $(__localver), $(if $(findstring ~, $(f)),,$(f))) |
| |
| localver = $(subst $(space),, \ |
| $(shell cat /dev/null $(_localver)) \ |
| $(patsubst "%",%,$(CONFIG_LOCALVERSION))) |
| |
| # If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called |
| # and if the SCM is know a tag from the SCM is appended. |
| # The appended tag is determined by the SCM used. |
| # |
| # Currently, only git is supported. |
| # Other SCMs can edit scripts/setlocalversion and add the appropriate |
| # checks as needed. |
| ifdef CONFIG_LOCALVERSION_AUTO |
| _localver-auto = $(shell $(CONFIG_SHELL) \ |
| $(srctree)/scripts/setlocalversion \ |
| -m $(CONFIG_LOCALVERSION_AUTO_GIT_TAG_GLOB) \ |
| $(srctree)) |
| localver-auto = $(LOCALVERSION)$(_localver-auto) |
| endif |
| |
| localver-full = $(localver)$(localver-auto) |
| |
| # Store (new) KERNELRELASE string in include/config/kernel.release |
| kernelrelease = $(KERNELVERSION)$(localver-full) |
| include/config/kernel.release: include/config/auto.conf FORCE |
| $(Q)rm -f $@ |
| $(Q)echo $(kernelrelease) > $@ |
| |
| Doxyfile.version: include/config/auto.conf FORCE |
| $(Q)rm -f $@ |
| $(Q)echo "PROJECT_NUMBER = $(KERNELRELEASE)" > $@ |
| |
| # Things we need to do before we recursively start building the kernel |
| # or the modules are listed in "prepare". |
| # A multi level approach is used. prepareN is processed before prepareN-1. |
| # archprepare is used in arch Makefiles and when processed asm symlink, |
| # version.h and scripts_basic is processed / created. |
| |
| # Listed in dependency order |
| PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 |
| |
| # prepare-all is deprecated, use prepare as valid replacement |
| PHONY += prepare-all |
| |
| # prepare3 is used to check if we are building in a separate output directory, |
| # and if so do: |
| # 1) Check that make has not been executed in the kernel src $(srctree) |
| # 2) Create the include2 directory, used for the second asm symlink |
| prepare3: include/config/kernel.release |
| ifneq ($(KBUILD_SRC),) |
| @echo ' Using $(srctree) as source for kernel' |
| $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \ |
| echo " $(srctree) is not clean, please run 'make mrproper'";\ |
| echo " in the '$(srctree)' directory.";\ |
| /bin/false; \ |
| fi; |
| $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi; |
| $(Q)if [ -e $(srctree)/include/asm-$(SRCARCH)/barebox.h ]; then \ |
| ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \ |
| fi |
| endif |
| |
| # prepare2 creates a makefile if using a separate output directory |
| prepare2: prepare3 outputmakefile |
| |
| prepare1: prepare2 include/generated/version.h include/generated/utsrelease.h \ |
| include/asm include/config.h include/config/auto.conf |
| |
| ifneq ($(KBUILD_MODULES),) |
| $(Q)mkdir -p $(MODVERDIR) |
| $(Q)rm -f $(MODVERDIR)/* |
| endif |
| |
| archprepare: prepare1 scripts_basic |
| |
| prepare0: archprepare FORCE |
| $(Q)$(MAKE) $(build)=. |
| |
| # All the preparing.. |
| prepare prepare-all: prepare0 |
| |
| # Leave this as default for preprocessing barebox.lds.S, which is now |
| # done in arch/$(ARCH)/kernel/Makefile |
| |
| export CPPFLAGS_barebox.lds += -Wp,-P -C -U$(ARCH) |
| |
| # FIXME: The asm symlink changes when $(ARCH) changes. That's |
| # hard to detect, but I suppose "make mrproper" is a good idea |
| # before switching between archs anyway. |
| |
| define check-symlink |
| set -e; \ |
| if [ -L include/asm ]; then \ |
| asmlink=`readlink include/asm | cut -d '-' -f 2`; \ |
| if [ "$$asmlink" != "$(SRCARCH)" ]; then \ |
| echo "ERROR: the symlink $@ points to asm-$$asmlink but asm-$(SRCARCH) was expected"; \ |
| echo " set ARCH or save .config and run 'make mrproper' to fix it"; \ |
| exit 1; \ |
| fi; \ |
| fi |
| endef |
| |
| # We create the target directory of the symlink if it does |
| # not exist so the test in chack-symlink works and we have a |
| # directory for generated filesas used by some architectures. |
| define create-symlink |
| if [ ! -L include/asm ]; then \ |
| echo ' SYMLINK $@ -> include/asm-$(SRCARCH)'; \ |
| if [ ! -d include/asm-$(SRCARCH) ]; then \ |
| mkdir -p include/asm-$(SRCARCH); \ |
| fi; \ |
| ln -fsn asm-$(SRCARCH) $@; \ |
| fi |
| endef |
| |
| include/asm: |
| $(Q)$(check-symlink) |
| $(Q)$(create-symlink) |
| |
| include/config.h: include/config/auto.conf |
| @echo ' SYMLINK $@ -> $(BOARD)/config.h' |
| ifneq ($(KBUILD_SRC),) |
| $(Q)ln -fsn $(srctree)/$(BOARD)/config.h $@ |
| else |
| @ln -fsn ../$(BOARD)/config.h $@ |
| endif |
| |
| # Generate some files |
| # --------------------------------------------------------------------------- |
| |
| # KERNELRELEASE can change from a few different places, meaning version.h |
| # needs to be updated, so this check is forced on all builds |
| |
| uts_len := 64 |
| define filechk_utsrelease.h |
| if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ |
| echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ |
| exit 1; \ |
| fi; \ |
| (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";) |
| endef |
| |
| define filechk_version.h |
| (echo \#define LINUX_VERSION_CODE $(shell \ |
| expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \ |
| echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) |
| endef |
| |
| include/generated/version.h: $(srctree)/Makefile FORCE |
| $(call filechk,version.h) |
| |
| include/generated/utsrelease.h: include/config/kernel.release FORCE |
| $(call filechk,utsrelease.h) |
| |
| # --------------------------------------------------------------------------- |
| |
| PHONY += depend dep |
| depend dep: |
| @echo '*** Warning: make $@ is unnecessary now.' |
| |
| # --------------------------------------------------------------------------- |
| # Modules |
| |
| ifdef CONFIG_MODULES |
| |
| # By default, build modules as well |
| |
| all: modules |
| |
| # Build modules |
| |
| PHONY += modules |
| modules: $(barebox-dirs) $(if $(KBUILD_BUILTIN),barebox) |
| @echo ' Building modules, stage 2.'; |
| $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost |
| |
| |
| # Target to prepare building external modules |
| PHONY += modules_prepare |
| modules_prepare: prepare scripts |
| |
| # Target to install modules |
| PHONY += modules_install |
| modules_install: _modinst_ _modinst_post |
| |
| PHONY += _modinst_ |
| _modinst_: |
| @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \ |
| echo "Warning: you may need to install module-init-tools"; \ |
| echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\ |
| sleep 1; \ |
| fi |
| @rm -rf $(MODLIB)/kernel |
| @rm -f $(MODLIB)/source |
| @mkdir -p $(MODLIB)/kernel |
| @ln -s $(srctree) $(MODLIB)/source |
| @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ |
| rm -f $(MODLIB)/build ; \ |
| ln -s $(objtree) $(MODLIB)/build ; \ |
| fi |
| $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst |
| |
| # If System.map exists, run depmod. This deliberately does not have a |
| # dependency on System.map since that would run the dependency tree on |
| # vmlinux. This depmod is only for convenience to give the initial |
| # boot a modules.dep even before / is mounted read-write. However the |
| # boot script depmod is the master version. |
| ifeq "$(strip $(INSTALL_MOD_PATH))" "" |
| depmod_opts := |
| else |
| depmod_opts := -b $(INSTALL_MOD_PATH) -r |
| endif |
| PHONY += _modinst_post |
| _modinst_post: _modinst_ |
| if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi |
| |
| else # CONFIG_MODULES |
| |
| # Modules not configured |
| # --------------------------------------------------------------------------- |
| |
| modules modules_install: FORCE |
| @echo |
| @echo "The present kernel configuration has modules disabled." |
| @echo "Type 'make config' and enable loadable module support." |
| @echo "Then build a kernel with module support enabled." |
| @echo |
| @exit 1 |
| |
| endif # CONFIG_MODULES |
| |
| ### |
| # Cleaning is done on three levels. |
| # make clean Delete most generated files |
| # Leave enough to build external modules |
| # make mrproper Delete the current configuration, and all generated files |
| # make distclean Remove editor backup files, patch leftover files and the like |
| |
| # Directories & files removed with 'make clean' |
| CLEAN_DIRS += $(MODVERDIR) |
| CLEAN_FILES += barebox System.map include/generated/barebox_default_env.h \ |
| .tmp_version .tmp_barebox* barebox.bin barebox.S \ |
| .tmp_kallsyms* barebox_default_env barebox.ldr Doxyfile.version \ |
| barebox_unsigned.bin |
| |
| # Directories & files removed with 'make mrproper' |
| MRPROPER_DIRS += include/config include2 usr/include |
| MRPROPER_FILES += .config .config.old include/asm .version .old_version \ |
| include/generated/autoconf.h include/generated/version.h \ |
| include/generated/utsrelease.h include/config.h \ |
| Module.symvers tags TAGS cscope* |
| clean_uldr: |
| rm -f $(srctree)/uloader.bin |
| rm -f $(srctree)/tools/ImageGenarator/*.bin |
| rm -f $(srctree)/tools/ImageGenarator/privatekey* |
| rm -f $(srctree)/tools/ImageGenarator/publickey* |
| rm -f $(srctree)/tools/ImageGenarator/c2kimage_gen |
| |
| |
| # clean - Delete most, but leave enough to build external modules |
| # |
| clean: rm-dirs := $(CLEAN_DIRS) |
| clean: rm-files := $(CLEAN_FILES) |
| clean: clean_uldr |
| clean-dirs := $(addprefix _clean_,$(srctree) $(barebox-alldirs)) |
| |
| PHONY += $(clean-dirs) clean archclean |
| $(clean-dirs): |
| $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) |
| |
| clean: archclean $(clean-dirs) |
| $(call cmd,rmdirs) |
| $(call cmd,rmfiles) |
| @find . $(RCS_FIND_IGNORE) \ |
| \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' -o -name '*.fw' \ |
| -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ |
| -o -name '*.symtypes' \) \ |
| -type f -print | xargs rm -f |
| |
| # mrproper - Delete all generated files, including .config |
| # |
| mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) |
| mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) |
| mrproper-dirs := $(addprefix _mrproper_,scripts) |
| |
| PHONY += $(mrproper-dirs) mrproper archmrproper |
| $(mrproper-dirs): |
| $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) |
| |
| mrproper: clean archmrproper $(mrproper-dirs) |
| $(call cmd,rmdirs) |
| $(call cmd,rmfiles) |
| |
| # distclean |
| # |
| PHONY += distclean |
| |
| distclean: mrproper |
| @find $(srctree) $(RCS_FIND_IGNORE) \ |
| \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ |
| -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ |
| -o -name '.*.rej' -o -size 0 \ |
| -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \ |
| -type f -print | xargs rm -f |
| |
| |
| # Packaging of the kernel to various formats |
| # --------------------------------------------------------------------------- |
| # rpm target kept for backward compatibility |
| package-dir := $(srctree)/scripts/package |
| |
| %pkg: include/config/kernel.release FORCE |
| $(Q)$(MAKE) $(build)=$(package-dir) $@ |
| rpm: include/config/kernel.release FORCE |
| $(Q)$(MAKE) $(build)=$(package-dir) $@ |
| |
| |
| # Brief documentation of the typical targets used |
| # --------------------------------------------------------------------------- |
| |
| boards := $(wildcard $(srctree)/arch/$(ARCH)/configs/*_defconfig) |
| boards := $(notdir $(boards)) |
| |
| help: |
| @echo 'Cleaning targets:' |
| @echo ' clean - Remove most generated files but keep the config and' |
| @echo ' enough build support to build external modules' |
| @echo ' mrproper - Remove all generated files + config + various backup files' |
| @echo ' distclean - mrproper + remove editor backup and patch files' |
| @echo ' docs - start doxygen for all output types (only HTML - FIXME)' |
| @echo ' htmldocs - create documentation in HTML format' |
| @echo '' |
| @echo 'Configuration targets:' |
| @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help |
| @echo '' |
| @echo 'Other generic targets:' |
| @echo ' all - Build all targets marked with [*]' |
| @echo '* barebox - Build the bare kernel' |
| @echo ' dir/ - Build all files in dir and below' |
| @echo ' dir/file.[ois] - Build specified target only' |
| @echo ' dir/file.ko - Build module including final link' |
| @echo ' tags/TAGS - Generate tags file for editors' |
| @echo ' cscope - Generate cscope index' |
| @echo ' (default: $(INSTALL_HDR_PATH))' |
| @echo '' |
| @echo 'Static analysers' |
| @echo ' checkstack - Generate a list of stack hogs' |
| @echo ' namespacecheck - Name space analysis on compiled kernel' |
| @if [ -r include/asm-$(ARCH)/Kbuild ]; then \ |
| echo ' headers_check - Sanity check on exported headers'; \ |
| fi |
| @echo '' |
| @echo 'Architecture specific targets ($(ARCH)):' |
| @$(if $(archhelp),$(archhelp),\ |
| echo ' No architecture specific help defined for $(ARCH)') |
| @echo '' |
| @$(if $(boards), \ |
| $(foreach b, $(boards), \ |
| printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \ |
| echo '') |
| |
| @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' |
| @echo ' make V=2 [targets] 2 => give reason for rebuild of target' |
| @echo ' make O=dir [targets] Locate all output files in "dir", including .config' |
| @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)' |
| @echo ' make C=2 [targets] Force check of all c source with $$CHECK' |
| @echo '' |
| @echo 'Execute "make" or "make all" to build all targets marked with [*] ' |
| @echo 'For further info see the ./README file' |
| |
| # Generate doxygen docs |
| # --------------------------------------------------------------------------- |
| .PHONY += docs htmldocs |
| |
| docs : htmldocs |
| |
| htmldocs: Doxyfile.version |
| @echo 'Running doxygen with local Doxyfile' |
| $(Q)doxygen Doxyfile |
| |
| # Generate tags for editors |
| # --------------------------------------------------------------------------- |
| |
| #We want __srctree to totally vanish out when KBUILD_OUTPUT is not set |
| #(which is the most common case IMHO) to avoid unneeded clutter in the big tags file. |
| #Adding $(srctree) adds about 20M on i386 to the size of the output file! |
| |
| ifeq ($(src),$(obj)) |
| __srctree = |
| else |
| __srctree = $(srctree)/ |
| endif |
| |
| ifeq ($(ALLSOURCE_ARCHS),) |
| ifeq ($(ARCH),um) |
| ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH) |
| else |
| ALLINCLUDE_ARCHS := $(ARCH) |
| endif |
| else |
| #Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behavour. |
| ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS) |
| endif |
| |
| ALLSOURCE_ARCHS := $(ARCH) |
| |
| define find-sources |
| ( find $(__srctree) $(RCS_FIND_IGNORE) \ |
| \( -name include -o -name arch \) -prune -o \ |
| -name $1 -print; \ |
| for ARCH in $(ALLSOURCE_ARCHS) ; do \ |
| find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \ |
| -name $1 -print; \ |
| done ; \ |
| find $(__srctree)include $(RCS_FIND_IGNORE) \ |
| \( -name config -o -name 'asm-*' \) -prune \ |
| -o -name $1 -print; \ |
| for ARCH in $(ALLINCLUDE_ARCHS) ; do \ |
| test -e $(__srctree)include/asm-$${arch} && \ |
| find $(__srctree)include/asm-$${arch} $(RCS_FIND_IGNORE) \ |
| -name $1 -print; \ |
| test -e $(__srctree)arch/$${arch}/include/asm && \ |
| find $(__srctree)arch/$${arch}/include/asm $(RCS_FIND_IGNORE) \ |
| -name $1 -print; \ |
| done ; \ |
| find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \ |
| -name $1 -print ) |
| endef |
| |
| define all-sources |
| $(call find-sources,'*.[chS]') |
| endef |
| define all-kconfigs |
| $(call find-sources,'Kconfig*') |
| endef |
| define all-defconfigs |
| $(call find-sources,'defconfig') |
| endef |
| |
| define xtags |
| if $1 --version 2>&1 | grep -iq exuberant; then \ |
| $(all-sources) | xargs $1 -a \ |
| -I __initdata,__exitdata,__acquires,__releases \ |
| -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \ |
| --extra=+f --c-kinds=+px \ |
| --regex-asm='/ENTRY\(([^)]*)\).*/\1/'; \ |
| $(all-kconfigs) | xargs $1 -a \ |
| --langdef=kconfig \ |
| --language-force=kconfig \ |
| --regex-kconfig='/^[[:blank:]]*config[[:blank:]]+([[:alnum:]_]+)/\1/'; \ |
| $(all-defconfigs) | xargs -r $1 -a \ |
| --langdef=dotconfig \ |
| --language-force=dotconfig \ |
| --regex-dotconfig='/^#?[[:blank:]]*(CONFIG_[[:alnum:]_]+)/\1/'; \ |
| elif $1 --version 2>&1 | grep -iq emacs; then \ |
| $(all-sources) | xargs $1 -a; \ |
| $(all-kconfigs) | xargs $1 -a \ |
| --regex='/^[ \t]*config[ \t]+\([a-zA-Z0-9_]+\)/\1/'; \ |
| $(all-defconfigs) | xargs -r $1 -a \ |
| --regex='/^#?[ \t]?\(CONFIG_[a-zA-Z0-9_]+\)/\1/'; \ |
| else \ |
| $(all-sources) | xargs $1 -a; \ |
| fi |
| endef |
| |
| quiet_cmd_cscope-file = FILELST cscope.files |
| cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files |
| |
| quiet_cmd_cscope = MAKE cscope.out |
| cmd_cscope = cscope -b |
| |
| cscope: FORCE |
| $(call cmd,cscope-file) |
| $(call cmd,cscope) |
| |
| quiet_cmd_TAGS = MAKE $@ |
| define cmd_TAGS |
| rm -f $@; \ |
| $(call xtags,etags) |
| endef |
| |
| TAGS: FORCE |
| $(call cmd,TAGS) |
| |
| quiet_cmd_tags = MAKE $@ |
| define cmd_tags |
| rm -f $@; \ |
| $(call xtags,ctags) |
| endef |
| |
| tags: FORCE |
| $(call cmd,tags) |
| |
| |
| endif #ifeq ($(config-targets),1) |
| endif #ifeq ($(mixed-targets),1) |
| |
| # Single targets |
| # --------------------------------------------------------------------------- |
| # Single targets are compatible with: |
| # - build whith mixed source and output |
| # - build with separate output dir 'make O=...' |
| # - external modules |
| # |
| # target-dir => where to store outputfile |
| # build-dir => directory in kernel source tree to use |
| |
| build-dir = $(patsubst %/,%,$(dir $@)) |
| target-dir = $(dir $@) |
| |
| %.s: %.c prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| %.i: %.c prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| %.o: %.c prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| %.lst: %.c prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| %.s: %.S prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| %.o: %.S prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| %.symtypes: %.c prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| |
| # Modules |
| %/: prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) |
| %.ko: prepare scripts FORCE |
| $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ |
| $(build)=$(build-dir) $(@:.ko=.o) |
| $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost |
| |
| # FIXME Should go into a make.lib or something |
| # =========================================================================== |
| |
| quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) |
| cmd_rmdirs = rm -rf $(rm-dirs) |
| |
| quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) |
| cmd_rmfiles = rm -f $(rm-files) |
| |
| |
| a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \ |
| $(NOSTDINC_FLAGS) $(CPPFLAGS) \ |
| $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o) |
| |
| quiet_cmd_as_o_S = AS $@ |
| cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< |
| |
| # read all saved command lines |
| |
| targets := $(wildcard $(sort $(targets))) |
| cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) |
| |
| ifneq ($(cmd_files),) |
| $(cmd_files): ; # Do not try to update included dependency files |
| include $(cmd_files) |
| endif |
| |
| # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir |
| # Usage: |
| # $(Q)$(MAKE) $(clean)=dir |
| clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj |
| |
| endif # skip-makefile |
| |
| PHONY += FORCE |
| FORCE: |
| |
| # Cancel implicit rules on top Makefile, `-rR' will apply to sub-makes. |
| Makefile: ; |
| |
| # Declare the contents of the .PHONY variable as phony. We keep that |
| # information in a variable se we can use it in if_changed and friends. |
| .PHONY: $(PHONY) |
| |