/* longlong.h -- definitions for mixed size 32/64 bit arithmetic.
 * Copyright (C) 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2004,
 * 2005  Free Software Foundation, Inc.
 * 
 * This definition file is free software; you can redistribute it
 * and/or modify it under the terms of the GNU General Public
 * License as published by the Free Software Foundation; either
 * version 2, or (at your option) any later version.

 * This definition file is distributed in the hope that it will be
 * useful, but WITHOUT ANY WARRANTY; without even the implied
 * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 * See the GNU General Public License for more details.

 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor,
 * Boston, MA 02110-1301, USA.  */

/* You have to define the following before including this file:

   UWtype -- An unsigned type, default type for operations (typically a "word")
   UHWtype -- An unsigned type, at least half the size of UWtype.
   UDWtype -- An unsigned type, at least twice as large a UWtype
   W_TYPE_SIZE -- size in bits of UWtype

   UQItype -- Unsigned 8 bit type.
   SItype, USItype -- Signed and unsigned 32 bit types.
   DItype, UDItype -- Signed and unsigned 64 bit types.

   On a 32 bit machine UWtype should typically be USItype;
   on a 64 bit machine, UWtype should typically be UDItype.  */

#define __BITS4 (W_TYPE_SIZE / 4)
#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))

#ifndef W_TYPE_SIZE
#define W_TYPE_SIZE	32
#define UWtype		USItype
#define UHWtype		USItype
#define UDWtype		UDItype
#endif

extern const UQItype __clz_tab[256];

/* Define auxiliary asm macros.

   1) umul_ppmm(high_prod, low_prod, multiplier, multiplicand) multiplies two
   UWtype integers MULTIPLIER and MULTIPLICAND, and generates a two UWtype
   word product in HIGH_PROD and LOW_PROD.

   2) __umulsidi3(a,b) multiplies two UWtype integers A and B, and returns a
   UDWtype product.  This is just a variant of umul_ppmm.

   3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
   denominator) divides a UDWtype, composed by the UWtype integers
   HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and places the quotient
   in QUOTIENT and the remainder in REMAINDER.  HIGH_NUMERATOR must be less
   than DENOMINATOR for correct operation.  If, in addition, the most
   significant bit of DENOMINATOR must be 1, then the pre-processor symbol
   UDIV_NEEDS_NORMALIZATION is defined to 1.

   4) sdiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
   denominator).  Like udiv_qrnnd but the numbers are signed.  The quotient
   is rounded towards 0.

   5) count_leading_zeros(count, x) counts the number of zero-bits from the
   msb to the first nonzero bit in the UWtype X.  This is the number of
   steps X needs to be shifted left to set the msb.  Undefined for X == 0,
   unless the symbol COUNT_LEADING_ZEROS_0 is defined to some value.

   6) count_trailing_zeros(count, x) like count_leading_zeros, but counts
   from the least significant end.

   7) add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1,
   high_addend_2, low_addend_2) adds two UWtype integers, composed by
   HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and LOW_ADDEND_2
   respectively.  The result is placed in HIGH_SUM and LOW_SUM.  Overflow
   (i.e. carry out) is not stored anywhere, and is lost.

   8) sub_ddmmss(high_difference, low_difference, high_minuend, low_minuend,
   high_subtrahend, low_subtrahend) subtracts two two-word UWtype integers,
   composed by HIGH_MINUEND_1 and LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and
   LOW_SUBTRAHEND_2 respectively.  The result is placed in HIGH_DIFFERENCE
   and LOW_DIFFERENCE.  Overflow (i.e. carry out) is not stored anywhere,
   and is lost.

   If any of these macros are left undefined for a particular CPU,
   C macros are used.  */

/* The CPUs come in alphabetical order below.

   Please add support for more CPUs here, or improve the current support
   for the CPUs below!
   (E.g. WE32100, IBM360.)  */

/* Snipped per CPU support */

/* If this machine has no inline assembler, use C macros.  */

#if !defined (add_ssaaaa)
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
	do {                                            \
		UWtype __x;                             \
		__x = (al) + (bl);                      \
		(sh) = (ah) + (bh) + (__x < (al));      \
		(sl) = __x;                             \
	} while (0)
#endif

#if !defined (sub_ddmmss)
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
	do {                                            \
		UWtype __x;                             \
		__x = (al) - (bl);                      \
		(sh) = (ah) - (bh) - (__x > (al));      \
		(sl) = __x;                             \
	} while (0)
#endif

/* If we lack umul_ppmm but have smul_ppmm, define umul_ppmm in terms of
   smul_ppmm.  */
#if !defined (umul_ppmm) && defined (smul_ppmm)
#define umul_ppmm(w1, w0, u, v) \
	do {                                                              \
		UWtype __w1;                                              \
		UWtype __xm0 = (u), __xm1 = (v);                          \
		smul_ppmm (__w1, w0, __xm0, __xm1);                       \
		(w1) = __w1 + (-(__xm0 >> (W_TYPE_SIZE - 1)) & __xm1)     \
		+ (-(__xm1 >> (W_TYPE_SIZE - 1)) & __xm0);                \
  } while (0)
#endif

/* If we still don't have umul_ppmm, define it using plain C.  */
#if !defined (umul_ppmm)
#define umul_ppmm(w1, w0, u, v) \
	do {                                                                  \
		UWtype __x0, __x1, __x2, __x3;                                \
		UHWtype __ul, __vl, __uh, __vh;                               \
		                                                              \
		__ul = __ll_lowpart (u);                                      \
		__uh = __ll_highpart (u);                                     \
		__vl = __ll_lowpart (v);                                      \
		__vh = __ll_highpart (v);                                     \
		                                                              \
		__x0 = (UWtype) __ul * __vl;                                  \
		__x1 = (UWtype) __ul * __vh;                                  \
		__x2 = (UWtype) __uh * __vl;                                  \
		__x3 = (UWtype) __uh * __vh;                                  \
		                                                              \
		__x1 += __ll_highpart (__x0);/* this can't give carry */      \
		__x1 += __x2;		/* but this indeed can */             \
		if (__x1 < __x2)		/* did we get it? */          \
		__x3 += __ll_B;		/* yes, add it in the proper pos.  */ \
		                                                              \
		(w1) = __x3 + __ll_highpart (__x1);                           \
		(w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0);    \
	} while (0)
#endif

#if !defined (__umulsidi3)
#define __umulsidi3(u, v) \
	({DWunion __w;                           \
	umul_ppmm (__w.s.high, __w.s.low, u, v); \
	__w.ll; })
#endif

/* Define this unconditionally, so it can be used for debugging.  */
#define __udiv_qrnnd_c(q, r, n1, n0, d) \
	do {                                                                                \
		UWtype __d1, __d0, __q1, __q0;                                              \
		UWtype __r1, __r0, __m;                                                     \
		__d1 = __ll_highpart (d);                                                   \
		__d0 = __ll_lowpart (d);                                                    \
		                                                                            \
		__r1 = (n1) % __d1;                                                         \
		__q1 = (n1) / __d1;                                                         \
		__m = (UWtype) __q1 * __d0;                                                 \
		__r1 = __r1 * __ll_B | __ll_highpart (n0);                                  \
		if (__r1 < __m) {                                                           \
			__q1--, __r1 += (d);                                                \
			if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */ \
				if (__r1 < __m)                                             \
					__q1--, __r1 += (d);                                \
		}                                                                           \
		__r1 -= __m;                                                                \
		                                                                            \
		__r0 = __r1 % __d1;                                                         \
		__q0 = __r1 / __d1;                                                         \
		__m = (UWtype) __q0 * __d0;                                                 \
		__r0 = __r0 * __ll_B | __ll_lowpart (n0);                                   \
		if (__r0 < __m) {                                                           \
			__q0--, __r0 += (d);                                                \
			if (__r0 >= (d))                                                    \
				if (__r0 < __m)                                             \
					__q0--, __r0 += (d);                                \
		}                                                                           \
		__r0 -= __m;                                                                \
		                                                                            \
		(q) = (UWtype) __q1 * __ll_B | __q0;                                        \
		(r) = __r0;                                                                 \
	} while (0)

/* If the processor has no udiv_qrnnd but sdiv_qrnnd, go through
   __udiv_w_sdiv (defined in libgcc or elsewhere).  */
#if !defined (udiv_qrnnd) && defined (sdiv_qrnnd)
#define udiv_qrnnd(q, r, nh, nl, d) \
	do {                                           \
		USItype __r;                           \
		(q) = __udiv_w_sdiv (&__r, nh, nl, d); \
		(r) = __r;                             \
	} while (0)
#endif

/* If udiv_qrnnd was not defined for this processor, use __udiv_qrnnd_c.  */
#if !defined (udiv_qrnnd)
#define UDIV_NEEDS_NORMALIZATION 1
#define udiv_qrnnd __udiv_qrnnd_c
#endif

#if !defined (count_leading_zeros)
#define count_leading_zeros(count, x) \
	do {                                                                        \
		UWtype __xr = (x);                                                  \
		UWtype __a;                                                         \
		                                                                    \
		if (W_TYPE_SIZE <= 32) {                                            \
			__a = __xr < ((UWtype)1<<2*__BITS4)                         \
			? (__xr < ((UWtype)1<<__BITS4) ? 0 : __BITS4)               \
			: (__xr < ((UWtype)1<<3*__BITS4) ?  2*__BITS4 : 3*__BITS4); \
		}                                                                   \
		else {                                                              \
			for (__a = W_TYPE_SIZE - 8; __a > 0; __a -= 8)              \
			if (((__xr >> __a) & 0xff) != 0)                            \
				break;                                              \
		}                                                                   \
		(count) = W_TYPE_SIZE - (__clz_tab[__xr >> __a] + __a);             \
	} while (0)
#define COUNT_LEADING_ZEROS_0 W_TYPE_SIZE
#endif

#if !defined (count_trailing_zeros)
/* Define count_trailing_zeros using count_leading_zeros.  The latter might be
   defined in asm, but if it is not, the C version above is good enough.  */
#define count_trailing_zeros(count, x) \
	do {                                                       \
		UWtype __ctz_x = (x);                              \
		UWtype __ctz_c;                                    \
		count_leading_zeros (__ctz_c, __ctz_x & -__ctz_x); \
		(count) = W_TYPE_SIZE - 1 - __ctz_c;               \
	} while (0)
#endif

#ifndef UDIV_NEEDS_NORMALIZATION
#define UDIV_NEEDS_NORMALIZATION 0
#endif