| # |
| # OMAP Architecture specific features |
| # |
| # (C) Copyright 2008 |
| # Texas Instruments, <www.ti.com> |
| # Nishanth Menon <x0nishan@ti.com> |
| # |
| # This program is free software; you can redistribute it and/or |
| # modify it under the terms of the GNU General Public License as |
| # published by the Free Software Foundation; either version 2 of |
| # the License, or (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| # MA 02111-1307 USA |
| |
| menu "OMAP Features" |
| depends on ARCH_OMAP |
| |
| config MACH_OMAP |
| bool |
| |
| choice |
| prompt "Select OMAP Variant" |
| |
| config ARCH_OMAP3 |
| bool "OMAP3" |
| select CPU_V7 |
| select GENERIC_GPIO |
| select ARCH_HAS_LOWLEVEL_INIT |
| select OMAP_CLOCK_SOURCE_S32K |
| help |
| Say Y here if you are using Texas Instrument's OMAP343x based platform |
| |
| config ARCH_OMAP4 |
| bool "OMAP4" |
| select CPU_V7 |
| select GENERIC_GPIO |
| select OMAP_CLOCK_SOURCE_S32K |
| help |
| Say Y here if you are using Texas Instrument's OMAP4 based platform |
| |
| endchoice |
| |
| ### Generic Clock configurations to be enabled by Mach - invisible to enable. |
| config OMAP_CLOCK_UART |
| bool |
| config OMAP_CLOCK_UART2 |
| bool |
| config OMAP_CLOCK_UART3 |
| bool |
| config OMAP_CLOCK_I2C |
| bool |
| |
| # Blind enable all possible clocks.. think twice before you do this. |
| config OMAP_CLOCK_ALL |
| bool |
| |
| config OMAP_CLOCK_SOURCE_S32K |
| bool |
| |
| config OMAP3_CLOCK_CONFIG |
| prompt "Clock Configuration" |
| bool |
| depends on ARCH_OMAP3 |
| default y |
| help |
| Say Y here if you like to have OMAP3 Clock configuration done. |
| |
| config OMAP3_COPY_CLOCK_SRAM |
| prompt "SRAM copy of Clock code" |
| bool |
| depends on OMAP3_CLOCK_CONFIG |
| default y |
| help |
| Say Y here if you like to have initial OMAP3 Clock configuration done from SRAM. |
| |
| config OMAP_GPMC |
| prompt "Support for GPMC configuration" |
| bool |
| depends on (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4) |
| default y |
| help |
| Enable this if you use Texas Instrument's General purpose Memory |
| Controller(GPMC). GPMC allows you to configure devices such as NOR, |
| NAND, OneNAND etc. |
| |
| config OMAP_BUILD_IFT |
| prompt "build ift binary" |
| bool |
| |
| config ARCH_TEXT_BASE |
| hex |
| default 0x80e80000 if MACH_OMAP343xSDP |
| default 0x80e80000 if MACH_BEAGLE |
| |
| config BOARDINFO |
| default "Texas Instrument's SDP343x" if MACH_OMAP343xSDP |
| default "Texas Instrument's Beagle" if MACH_BEAGLE |
| default "Texas Instrument's OMAP3EVM" if MACH_OMAP3EVM |
| default "Texas Instrument's Panda" if MACH_PANDA |
| default "Phytec phyCORE pcm049" if MACH_PCM049 |
| |
| choice |
| prompt "Select OMAP board" |
| |
| config MACH_OMAP343xSDP |
| bool "Texas Instrument's SDP343x" |
| select MACH_HAS_LOWLEVEL_INIT |
| select OMAP_CLOCK_ALL |
| select HAS_OMAP_NAND |
| depends on ARCH_OMAP3 |
| help |
| Say Y here if you are using SDP343x platform |
| |
| config MACH_BEAGLE |
| bool "Texas Instrument's Beagle Board" |
| select MACH_HAS_LOWLEVEL_INIT |
| select OMAP_CLOCK_ALL |
| select HAVE_NOSHELL |
| select HAS_OMAP_NAND |
| depends on ARCH_OMAP3 |
| help |
| Say Y here if you are using Beagle Board |
| |
| config MACH_OMAP3EVM |
| bool "Texas Instrument's OMAP3 EVM" |
| select MACH_HAS_LOWLEVEL_INIT |
| select OMAP_CLOCK_ALL |
| select HAS_OMAP_NAND |
| depends on ARCH_OMAP3 |
| help |
| Say Y here if you are using OMAP3EVM |
| |
| config MACH_PANDA |
| bool "Texas Instrument's Panda Board" |
| select HAVE_MMU |
| select HAVE_NOSHELL |
| select MACH_HAS_LOWLEVEL_INIT |
| help |
| Say Y here if you are using OMAP4 Panda board |
| |
| config MACH_PCM049 |
| bool "Phytec phyCORE pcm049" |
| select HAVE_MMU |
| select HAVE_NOSHELL |
| depends on ARCH_OMAP4 |
| select MACH_HAS_LOWLEVEL_INIT |
| help |
| Say Y here if you are using Phytecs phyCORE pcm049 board |
| based on OMAP4 |
| |
| endchoice |
| |
| if MACH_OMAP3EVM |
| choice |
| prompt "Select UART" |
| |
| config OMAP3EVM_UART1 |
| bool "Use UART1" |
| depends on MACH_OMAP3EVM |
| help |
| Say Y here if you would like to use UART1 as console. |
| |
| config OMAP3EVM_UART3 |
| bool "Use UART3" |
| depends on MACH_OMAP3EVM |
| help |
| Say Y here if you would like to use UART3 as console. |
| endchoice |
| endif |
| |
| config MACH_OMAP_ADVANCED_MUX |
| bool "Enable advanced pin muxing" |
| depends on MACH_OMAP343xSDP |
| default n |
| help |
| Say Y here if you would like to have complete pin muxing to be |
| done at boot time |
| |
| config HAS_OMAP_NAND |
| bool |
| |
| endmenu |
