**************************************** | |
RELEASE NOTES | |
**************************************** | |
Chelsio T3 Network Driver for Linux | |
Version : 2.0.0.1 | |
Date : 08/23/2012 | |
================================================================================ | |
1.CHANGES | |
---------------------------------------- | |
- Fixed: version string in the generated RPM. | |
2.ERRATA (Open Issues) | |
---------------------------------------- | |
- 10420: NFS connectivity toggles, while running "iozone -a" on the mounted | |
share | |
- 10741: Traffic is not running on multiple slaves of bond mode=2 with policy | |
layer3+4 | |
================================================================================ | |
================================================================================ | |
Version : 2.0.0.0 | |
Date : 08/10/2012 | |
================================================================================ | |
1.CHANGES | |
---------------------------------------- | |
- Fixed: t3_tom and t4_tom compatibilty issues on supported platforms. | |
- Added: Support for RHEL6.3, RHEL5.8. | |
- Added: TOE Bonding support for RHEL5.7, RHEL5.8. | |
2.ERRATA (Open Issues) | |
---------------------------------------- | |
- 10420: NFS connectivity toggles, while running "iozone -a" on the mounted | |
share | |
- 10741: Traffic is not running on multiple slaves of bond mode=2 with policy | |
layer3+4 | |
================================================================================ | |
================================================================================ | |
Version : 1.6.0.3 | |
Date : 03/22/2012 | |
================================================================================ | |
1.CHANGES | |
---------------------------------------- | |
- Fixed: Compilation issues observed on RHEL4.7 and kernels 2.6.23 - 2.6.26. | |
- Fixed: Error messages observed while runnig ifup-local in RHEL6. | |
- Fixed: Boot Image Loading using cxgbtool. | |
- Fixed: Unable to establish a Tx Connection if there is no ARP entry for the | |
PEER. | |
- Added: Support for RHEL6.1, RHEL6.2, RHEL5.7. | |
- Added: TOE Bonding support for RHEL6.1 and RHEL6.2. | |
2.ERRATA (Open Issues) | |
---------------------------------------- | |
- 10420: NFS connectivity toggles, while running "iozone -a" on the mounted | |
share | |
- 10741: Traffic is not running on multiple slaves of bond mode=2 with policy | |
layer3+4 | |
================================================================================ | |
================================================================================ | |
Version : 1.5.2.0 | |
Date : 12/02/2011 | |
================================================================================ | |
1.CHANGES | |
---------------------------------------- | |
- Added die notifier to bring the link down in case of kernel panic. | |
- Added support for firmware and driver Watchdog. | |
- Updated Firmware to 7.12.0. | |
- Added support for RHEL 4.x | |
2.ERRATA (Open Issues) | |
---------------------------------------- | |
- 2716: Unable to compile chiscsi-target-5.0.0059.3 in offload mode with | |
cxgb3toe-1.5.2.0 | |
- 960: Running iozone on nfs shared directory mounted using proto UDP stals | |
================================================================================ | |
================================================================================ | |
Version : 1.5.1.6 | |
Date : 03/04/2011 | |
================================================================================ | |
1.CHANGES | |
---------------------------------------- | |
- Added support for 2.6.33, 2.6.35, 2.6.36 | |
- Fix Queue full/Restart mechanism on dual port | |
adapters when multiple TX queue feature is supported | |
- Added TOE bonding support for RHEL 6.0 | |
- Fixed 1G autonegotiation issues | |
- Fixed failure with MSI interrupt mode | |
- Support for RedHat MRG-1.3 kernel | |
2.ERRATA (Open Issues) | |
---------------------------------------- | |
- 2716: Unable to compile chiscsi-target-5.0.0059.3 in offload mode with | |
cxgb3toe-1.5.1.6 | |
- 960: Running iozone on nfs shared directory mounted using proto UDP stals | |
================================================================================ | |
================================================================================ | |
Version : 1.5.0.3 | |
Date : 10/08/2010 | |
================================================================================ | |
1.CHANGES | |
---------------------------------------- | |
- Added support for 2.6.32, 33, 34. | |
- Added TOE bonding support for RHEL5.5 | |
- Bind with FW 7.11 | |
- Release filtering and traffic management features. | |
- Fixed Twinax modules detection | |
- Refactor mac layer link fault handling to clean up phy and mac layer link | |
event management. | |
- Fixed bonding oops with multiple bonding devices | |
- Fixed back pressure issue seen on S304 adapters | |
- Disabled dynamic selective ack when it is administratively set to 0 | |
- Fixed LACP support on S304 adapters | |
- Updated parity error management to avoid driver soft lockups. | |
2.ERRATA (Open Issues) | |
---------------------------------------- | |
- 625: Low performance seen while running TCP & UDP traffic on IBM Blade Server. | |
- 830: cxgb3-toe not compiling in latest linux kernel (2.6.35-5-default). | |
================================================================================ | |
================================================================================ | |
Version : 1.4.1 | |
Date : Apr 2010 | |
================================================================================ | |
1.CHANGES | |
---------------------------------------- | |
- Fixes for cxgbtool | |
- Fix for link flap issue | |
- Fix for VLAN on top of bonding in TOE mode. | |
2.ERRATA (Open Issues) | |
---------------------------------------- | |
- 12858: "modinfo cxgb3" displays the incorrect driver version if inbox OFED | |
driver is already installed on SLES 11- 64 and 32 bit platforms | |
- 12869: Unable to detach the slaves when bonded in TOE mode using | |
ifenslave -d <bondX> <ethX> | |
================================================================================ | |
================================================================================ | |
Version : 1.4 | |
Date : Feb 2010 | |
================================================================================ | |
1.CHANGES | |
---------------------------------------- | |
- Added support for 2.6.31, 2.6.32 | |
- Added auto negotiation support for 1 port 10G base-T adapters. | |
- Optimizes response queue sizes to limit chip starvation | |
- Added support for Traffic management and Filtering. | |
Please contact support@chelsio.com for more details. | |
- Fixed VLAN over Jumbo frames connectivity issues | |
- Added support for Ubuntu 9.10 platform | |
- Fix potential link flap issues on 2 ports LP-CR adapters | |
- Support for TX multi queues when the stack supports it. | |
- Fixed rare TOM DDP crash when closing a connection. | |
2.ERRATA (Open Issues) | |
---------------------------------------- | |
- 7302: OS reports link up when TX cable is unplugged,if the peer interface is | |
down when bringing up the DUTs interface | |
================================================================================ | |
================================================================================ | |
Version : 1.3.1 | |
Date :August 2009 | |
================================================================================ | |
1.CHANGES | |
---------------------------------------- | |
- Added support for S320E-LP-CR adapter. | |
- Added support for N320E-G2 adapter. | |
- Added support for 10G base-T adapters. | |
- Fixed FCS errors seen on S302 adapters in jumbo frame mode. | |
- Fix offload Tx zero copy behaviour in conjunction with non blocking writes. | |
- Fixed a 1.3 regression crash in offload Rx DDP mode. | |
- Fixed a potential link report error for AEL1006 and QT2045 phy based adapters. | |
2.ERRATA (Open Issues) | |
--------------------------------------------------------------------- | |
- N/A | |
================================================================================ | |
================================================================================ | |
Version : 1.3 | |
Date : 06/03/2009 | |
================================================================================ | |
1.CHANGES | |
---------------------------------------- | |
- Set up one queue only in INTx and MSI mode | |
- Allows MSI-X mode even if the system allocates less vectors than requested | |
- Allows package to compile on xen enabled systems | |
- Fixed TOE performance issue in request-response scenario | |
- Added TOE support for 2.6.29 | |
- Added TOE support for 2.6.30 | |
- The TOE driver allocates its own structure, as opposed to use existing stack | |
structures | |
- Fixed SGE RX refill scheme when HW available Rx entries are low | |
- Start the SGE context timers after the queue sets have been allocated successfully. | |
- Added support to dump egress context through cxgbtool | |
- Added support to retrieve trace filter configuration through cxgbtool. | |
- Added filtering and Traffic management - please contact the support team ( | |
support@chelsio.com) | |
- Poll the adapter for free list empty conditions, as opposed to getting | |
interrupted | |
- Added XOR bonding mode for TOE. | |
- Fixed VLAN and bonding cohabitation in TOE mode. | |
- Updated T3B2 xgmac hang workaround logic to avoid false positives | |
- Avoided XGMAC back pressure issues when ports are configured down. | |
- Fixed TOE TX zero copy on recent kernels | |
- Fixed crash when the driver is unloaded under heavy offload traffic | |
- Fixed soft lockups on driver module removal | |
- Fixed a race condition in the neighbour management of offloaded connections | |
- Fixed a performance issue using addresses 203.x.y.z | |
- Fixed Rx FIFO pause HWM computation | |
- Added RHEL4.8, 2.6.29, 2.6.30 support | |
- Added early support for AEL2020 phy based adapters | |
- Added early support for AQ100x phy based adapters | |
- Added early support for 2 ports pci-e gen2 adapters | |
- Added Firmware 7.4 support | |
- Fixed RHEL3.8 build | |
2.ERRATA | |
---------------------------------------- | |
- N/A | |
================================================================================ | |
================================================================================ | |
Version : 1.2.1 | |
Date : 03/17/2009 | |
================================================================================ | |
1.CHANGES | |
---------------------------------------- | |
- Updated README | |
- Fixed compilation error which occurred as a result of a Makefile bug | |
2.ERRATA | |
---------------------------------------- | |
- N/A | |
******************************************************************************** | |
Copyright (C) 2012 Chelsio Communications. All Rights Reserved | |
The information in this document is furnished for informational use only, is | |
subject to change without notice, and should not be construed as a commitment by | |
Chelsio Communications. Chelsio Communications assumes no responsibility or | |
liability for any errors or inaccuracies that may appear in this document or any | |
software that may be provided in association with this document. Except as | |
permitted by such license, no part of this document may be reproduced, stored in | |
a retrieval system,or transmitted in any form or by any means without the | |
express written consent of Chelsio Communications. |