| ============================ | |
| R E L E A S E N O T E S | |
| ============================ | |
| Broadcom NetXtreme II iSCSI Driver | |
| For Linux | |
| Copyright (c) 2006-2009 Broadcom Corporation | |
| All rights reserved. | |
| Version 2.0.1e-05 (Dec 16, 2009) | |
| ================================ | |
| Fixes | |
| ===== | |
| 1. Problem: CQ 44851 iscsiboot image intermittently does not restart with | |
| init 6 command | |
| Cause: Driver called to libiscsi routine with improper pointer | |
| dereference | |
| Change: Fixed the pointer dereferencing | |
| Impact: All chipsets | |
| 2. Problem: CQ 44842 Session get disconnected on broadcom offload with | |
| lunreset | |
| Cause: Driver not processing sense data if the SCSI response status | |
| is not CHECK_CONDITION | |
| Change: Modified so that sense data processing will occur for all | |
| fail status | |
| Impact: All chipsets | |
| Version 2.0.1e-04 (Nov 04, 2009) | |
| ================================ | |
| Fixes | |
| ===== | |
| 1. Problem: CQ 44224 Not able to login to the target using jumbo frames | |
| Cause: Driver did not support max mtu to be > 1500 | |
| Change: Added support for max mtu = 9000 | |
| Impact: All chipsets | |
| Version 2.0.1e-03 (Sep 18, 2009) | |
| ================================ | |
| Fixes | |
| ===== | |
| 1. Problem: Failed to operate with 57711E | |
| Cause: Driver did not identify the chipset correctly | |
| Change: Fixed the identification procedure | |
| Impact: 57711E | |
| Version 2.0.1e-02 (Aug 24, 2009) | |
| ================================ | |
| Fixes | |
| ===== | |
| 1. Problem: CQ 43247 - Failing iLab iSCSI test 6.1 | |
| (Error from initiator to target) | |
| Cause: Driver did not send iSCSI tmf request pkts correctly | |
| Change: Fixed tmf request sending | |
| Impact: All chipsets, SLES11U0 | |
| Version 2.0.1e-01 (Aug 17, 2009) | |
| ================================ | |
| Fixes | |
| ===== | |
| 1. Problem: Disk does not appear in filesystem after login to iscsi target | |
| Cause: Driver did not return proper SCSI host number in create_session() | |
| and this caused stack to scan an invalid host | |
| Change: return correct shost->host_no in create_session() call | |
| Impact: All chipsets, SLES11U0 | |
| 2. Problem: Unable to logon to target using 5771x chipsets | |
| Cause: Bug in usage for 'sq_size' caused driver to use '0' send queue | |
| size and eventual connection offload failure. | |
| Change: Fixed SQ handling | |
| Impact: 5771x chipsets, SLES11U0 | |
| Enhancements | |
| ============ | |
| Back ported a bunch of bug fixes/clean-up's from upstream driver, | |
| 1) convert hba->net_dev_lock and bnx2i_dev_lock to mutex | |
| 2) Fix for invalid cid (cid #0) freed under certain error conditions | |
| 3) Fix for CMDSN jump seen during cable pull tests | |
| Version 2.0.1e (Apr 21, 2009) | |
| ================================ | |
| Initial Release | |