blob: 8c9863161ad49b039f45f848734fc8387c13d28d [file] [log] [blame]
/*
* OMAP1 CPU identification code
*
* Copyright (C) 2004 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <common.h>
#include <command.h>
#include <arm926ejs.h>
#if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP)
#define omap_readw(x) *(volatile unsigned short *)(x)
#define omap_readl(x) *(volatile unsigned long *)(x)
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#define OMAP_DIE_ID_0 0xfffe1800
#define OMAP_DIE_ID_1 0xfffe1804
#define OMAP_PRODUCTION_ID_0 0xfffe2000
#define OMAP_PRODUCTION_ID_1 0xfffe2004
#define OMAP32_ID_0 0xfffed400
#define OMAP32_ID_1 0xfffed404
struct omap_id {
u16 jtag_id; /* Used to determine OMAP type */
u8 die_rev; /* Processor revision */
u32 omap_id; /* OMAP revision */
u32 type; /* Cpu id bits [31:08], cpu class bits [07:00] */
};
/* Register values to detect the OMAP version */
static struct omap_id omap_ids[] = {
{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
{ .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00},
{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00},
{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
{ .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000},
{ .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00},
{ .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00},
{ .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300},
{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300},
{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300},
{ .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000},
{ .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000},
{ .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000},
};
/*
* Get OMAP type from PROD_ID.
* 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
* 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense.
* Undocumented register in TEST BLOCK is used as fallback; This seems to
* work on 1510, 1610 & 1710. The official way hopefully will work in future
* processors.
*/
static u16 omap_get_jtag_id(void)
{
u32 prod_id, omap_id;
prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
omap_id = omap_readl(OMAP32_ID_1);
/* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
if (((prod_id >> 20) == 0) || (prod_id == omap_id))
prod_id = 0;
else
prod_id &= 0xffff;
if (prod_id)
return prod_id;
/* Use OMAP32_ID_1 as fallback */
prod_id = ((omap_id >> 12) & 0xffff);
return prod_id;
}
/*
* Get OMAP revision from DIE_REV.
* Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID.
* Undocumented register in the TEST BLOCK is used as fallback.
* REVISIT: This does not seem to work on 1510
*/
static u8 omap_get_die_rev(void)
{
u32 die_rev;
die_rev = omap_readl(OMAP_DIE_ID_1);
/* Check for broken OMAP_DIE_ID on early 1710 */
if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id())
die_rev = 0;
die_rev = (die_rev >> 17) & 0xf;
if (die_rev)
return die_rev;
die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf;
return die_rev;
}
static unsigned long dpll1(void)
{
unsigned short pll_ctl_val = omap_readw(DPLL_CTL_REG);
unsigned long rate;
rate = CONFIG_SYS_CLK_FREQ; /* Base xtal rate */
if (pll_ctl_val & 0x10) {
/* PLL enabled, apply multiplier and divisor */
if (pll_ctl_val & 0xf80)
rate *= (pll_ctl_val & 0xf80) >> 7;
rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
} else {
/* PLL disabled, apply bypass divisor */
switch (pll_ctl_val & 0xc) {
case 0:
break;
case 0x4:
rate /= 2;
break;
default:
rate /= 4;
break;
}
}
return rate;
}
static unsigned long armcore(void)
{
unsigned short arm_ckctl = omap_readw(ARM_CKCTL);
return (dpll1() >> ((arm_ckctl & 0x0030) >> 4));
}
int print_cpuinfo (void)
{
int i;
u16 jtag_id;
u8 die_rev;
u32 omap_id;
u8 cpu_type;
u32 system_serial_high;
u32 system_serial_low;
u32 system_rev = 0;
jtag_id = omap_get_jtag_id();
die_rev = omap_get_die_rev();
omap_id = omap_readl(OMAP32_ID_0);
#ifdef DEBUG
printf("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
printf("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
omap_readl(OMAP_DIE_ID_1),
(omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
printf("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0));
printf("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
omap_readl(OMAP_PRODUCTION_ID_1),
omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
printf("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
printf("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
printf("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
#endif
system_serial_high = omap_readl(OMAP_DIE_ID_0);
system_serial_low = omap_readl(OMAP_DIE_ID_1);
/* First check only the major version in a safe way */
for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
if (jtag_id == (omap_ids[i].jtag_id)) {
system_rev = omap_ids[i].type;
break;
}
}
/* Check if we can find the die revision */
for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
system_rev = omap_ids[i].type;
break;
}
}
/* Finally check also the omap_id */
for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
if (jtag_id == omap_ids[i].jtag_id
&& die_rev == omap_ids[i].die_rev
&& omap_id == omap_ids[i].omap_id) {
system_rev = omap_ids[i].type;
break;
}
}
/* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
cpu_type = system_rev >> 24;
switch (cpu_type) {
case 0x07:
system_rev |= 0x07;
break;
case 0x03:
case 0x15:
system_rev |= 0x15;
break;
case 0x16:
case 0x17:
system_rev |= 0x16;
break;
case 0x24:
system_rev |= 0x24;
break;
default:
printf("Unknown OMAP cpu type: 0x%02x\n", cpu_type);
}
printf("CPU: OMAP%04x", system_rev >> 16);
if ((system_rev >> 8) & 0xff)
printf("%x", (system_rev >> 8) & 0xff);
#ifdef DEBUG
printf(" revision %i handled as %02xxx id: %08x%08x",
die_rev, system_rev & 0xff, system_serial_low, system_serial_high);
#endif
printf(" at %ld.%01ld MHz (DPLL1=%ld.%01ld MHz)\n",
armcore() / 1000000, (armcore() / 100000) % 10,
dpll1() / 1000000, (dpll1() / 100000) % 10);
return 0;
}
#endif /* #if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP) */