blob: 1931d64de0c47b67c90eb2209b79814628e1781f [file] [log] [blame]
/*
* (C) Copyright 2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#include <nand.h>
struct pdnb3_ndfc_regs {
uchar cmd;
uchar wait;
uchar addr;
uchar term;
uchar data;
};
static u8 hwctl;
static struct pdnb3_ndfc_regs *pdnb3_ndfc;
#define readb(addr) *(volatile u_char *)(addr)
#define readl(addr) *(volatile u_long *)(addr)
#define writeb(d,addr) *(volatile u_char *)(addr) = (d)
/*
* The PDNB3 has a NAND Flash Controller (NDFC) that handles all accesses to
* the NAND devices. The NDFC has command, address and data registers that
* when accessed will set up the NAND flash pins appropriately. We'll use the
* hwcontrol function to save the configuration in a global variable.
* We can then use this information in the read and write functions to
* determine which NDFC register to access.
*
* There is one NAND devices on the board, a Hynix HY27US08561A (32 MByte).
*/
static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd)
{
switch (cmd) {
case NAND_CTL_SETCLE:
hwctl |= 0x1;
break;
case NAND_CTL_CLRCLE:
hwctl &= ~0x1;
break;
case NAND_CTL_SETALE:
hwctl |= 0x2;
break;
case NAND_CTL_CLRALE:
hwctl &= ~0x2;
break;
case NAND_CTL_SETNCE:
break;
case NAND_CTL_CLRNCE:
writeb(0x00, &(pdnb3_ndfc->term));
break;
}
}
static void pdnb3_nand_write_byte(struct mtd_info *mtd, u_char byte)
{
if (hwctl & 0x1)
writeb(byte, &(pdnb3_ndfc->cmd));
else if (hwctl & 0x2)
writeb(byte, &(pdnb3_ndfc->addr));
else
writeb(byte, &(pdnb3_ndfc->data));
}
static u_char pdnb3_nand_read_byte(struct mtd_info *mtd)
{
return readb(&(pdnb3_ndfc->data));
}
static void pdnb3_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
for (i = 0; i < len; i++) {
if (hwctl & 0x1)
writeb(buf[i], &(pdnb3_ndfc->cmd));
else if (hwctl & 0x2)
writeb(buf[i], &(pdnb3_ndfc->addr));
else
writeb(buf[i], &(pdnb3_ndfc->data));
}
}
static void pdnb3_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
int i;
if (len % 4) {
for (i = 0; i < len; i++)
buf[i] = readb(&(pdnb3_ndfc->data));
} else {
ulong *ptr = (ulong *)buf;
int count = len >> 2;
for (i = 0; i < count; i++)
*ptr++ = readl(&(pdnb3_ndfc->data));
}
}
static int pdnb3_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
for (i = 0; i < len; i++)
if (buf[i] != readb(&(pdnb3_ndfc->data)))
return i;
return 0;
}
static int pdnb3_nand_dev_ready(struct mtd_info *mtd)
{
volatile u_char val;
/*
* Blocking read to wait for NAND to be ready
*/
val = readb(&(pdnb3_ndfc->wait));
/*
* Return always true
*/
return 1;
}
void board_nand_init(struct nand_chip *nand)
{
pdnb3_ndfc = (struct pdnb3_ndfc_regs *)CFG_NAND_BASE;
nand->eccmode = NAND_ECC_SOFT;
/* Set address of NAND IO lines (Using Linear Data Access Region) */
nand->IO_ADDR_R = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
nand->IO_ADDR_W = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
/* Reference hardware control function */
nand->hwcontrol = pdnb3_nand_hwcontrol;
/* Set command delay time */
nand->hwcontrol = pdnb3_nand_hwcontrol;
nand->write_byte = pdnb3_nand_write_byte;
nand->read_byte = pdnb3_nand_read_byte;
nand->write_buf = pdnb3_nand_write_buf;
nand->read_buf = pdnb3_nand_read_buf;
nand->verify_buf = pdnb3_nand_verify_buf;
nand->dev_ready = pdnb3_nand_dev_ready;
}
#endif