/*
 * 	Format of an ARP firewall descriptor
 *
 * 	src, tgt, src_mask, tgt_mask, arpop, arpop_mask are always stored in
 *	network byte order.
 * 	flags are stored in host byte order (of course).
 */

#ifndef _ARPTABLES_H
#define _ARPTABLES_H

#ifdef __KERNEL__
#include <linux/if.h>
#include <linux/in.h>
#include <linux/if_arp.h>
#include <linux/skbuff.h>
#endif
#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/netfilter_arp.h>

#include <linux/netfilter/x_tables.h>

#define ARPT_FUNCTION_MAXNAMELEN XT_FUNCTION_MAXNAMELEN
#define ARPT_TABLE_MAXNAMELEN XT_TABLE_MAXNAMELEN

#define ARPT_DEV_ADDR_LEN_MAX 16

struct arpt_devaddr_info {
	char addr[ARPT_DEV_ADDR_LEN_MAX];
	char mask[ARPT_DEV_ADDR_LEN_MAX];
};

/* Yes, Virginia, you have to zero the padding. */
struct arpt_arp {
	/* Source and target IP addr */
	struct in_addr src, tgt;
	/* Mask for src and target IP addr */
	struct in_addr smsk, tmsk;

	/* Device hw address length, src+target device addresses */
	u_int8_t arhln, arhln_mask;
	struct arpt_devaddr_info src_devaddr;
	struct arpt_devaddr_info tgt_devaddr;

	/* ARP operation code. */
	__be16 arpop, arpop_mask;

	/* ARP hardware address and protocol address format. */
	__be16 arhrd, arhrd_mask;
	__be16 arpro, arpro_mask;

	/* The protocol address length is only accepted if it is 4
	 * so there is no use in offering a way to do filtering on it.
	 */

	char iniface[IFNAMSIZ], outiface[IFNAMSIZ];
	unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ];

	/* Flags word */
	u_int8_t flags;
	/* Inverse flags */
	u_int16_t invflags;
};

#define arpt_entry_target xt_entry_target
#define arpt_standard_target xt_standard_target

/* Values for "flag" field in struct arpt_ip (general arp structure).
 * No flags defined yet.
 */
#define ARPT_F_MASK		0x00	/* All possible flag bits mask. */

/* Values for "inv" field in struct arpt_arp. */
#define ARPT_INV_VIA_IN		0x0001	/* Invert the sense of IN IFACE. */
#define ARPT_INV_VIA_OUT	0x0002	/* Invert the sense of OUT IFACE */
#define ARPT_INV_SRCIP		0x0004	/* Invert the sense of SRC IP. */
#define ARPT_INV_TGTIP		0x0008	/* Invert the sense of TGT IP. */
#define ARPT_INV_SRCDEVADDR	0x0010	/* Invert the sense of SRC DEV ADDR. */
#define ARPT_INV_TGTDEVADDR	0x0020	/* Invert the sense of TGT DEV ADDR. */
#define ARPT_INV_ARPOP		0x0040	/* Invert the sense of ARP OP. */
#define ARPT_INV_ARPHRD		0x0080	/* Invert the sense of ARP HRD. */
#define ARPT_INV_ARPPRO		0x0100	/* Invert the sense of ARP PRO. */
#define ARPT_INV_ARPHLN		0x0200	/* Invert the sense of ARP HLN. */
#define ARPT_INV_MASK		0x03FF	/* All possible flag bits mask. */

/* This structure defines each of the firewall rules.  Consists of 3
   parts which are 1) general ARP header stuff 2) match specific
   stuff 3) the target to perform if the rule matches */
struct arpt_entry
{
	struct arpt_arp arp;

	/* Size of arpt_entry + matches */
	u_int16_t target_offset;
	/* Size of arpt_entry + matches + target */
	u_int16_t next_offset;

	/* Back pointer */
	unsigned int comefrom;

	/* Packet and byte counters. */
	struct xt_counters counters;

	/* The matches (if any), then the target. */
	unsigned char elems[0];
};

/*
 * New IP firewall options for [gs]etsockopt at the RAW IP level.
 * Unlike BSD Linux inherits IP options so you don't have to use a raw
 * socket for this. Instead we check rights in the calls.
 *
 * ATTENTION: check linux/in.h before adding new number here.
 */
#define ARPT_BASE_CTL		96

#define ARPT_SO_SET_REPLACE		(ARPT_BASE_CTL)
#define ARPT_SO_SET_ADD_COUNTERS	(ARPT_BASE_CTL + 1)
#define ARPT_SO_SET_MAX			ARPT_SO_SET_ADD_COUNTERS

#define ARPT_SO_GET_INFO		(ARPT_BASE_CTL)
#define ARPT_SO_GET_ENTRIES		(ARPT_BASE_CTL + 1)
/* #define ARPT_SO_GET_REVISION_MATCH	(APRT_BASE_CTL + 2) */
#define ARPT_SO_GET_REVISION_TARGET	(ARPT_BASE_CTL + 3)
#define ARPT_SO_GET_MAX			(ARPT_SO_GET_REVISION_TARGET)

/* CONTINUE verdict for targets */
#define ARPT_CONTINUE XT_CONTINUE

/* For standard target */
#define ARPT_RETURN XT_RETURN

/* The argument to ARPT_SO_GET_INFO */
struct arpt_getinfo {
	/* Which table: caller fills this in. */
	char name[ARPT_TABLE_MAXNAMELEN];

	/* Kernel fills these in. */
	/* Which hook entry points are valid: bitmask */
	unsigned int valid_hooks;

	/* Hook entry points: one per netfilter hook. */
	unsigned int hook_entry[NF_ARP_NUMHOOKS];

	/* Underflow points. */
	unsigned int underflow[NF_ARP_NUMHOOKS];

	/* Number of entries */
	unsigned int num_entries;

	/* Size of entries. */
	unsigned int size;
};

/* The argument to ARPT_SO_SET_REPLACE. */
struct arpt_replace {
	/* Which table. */
	char name[ARPT_TABLE_MAXNAMELEN];

	/* Which hook entry points are valid: bitmask.  You can't
           change this. */
	unsigned int valid_hooks;

	/* Number of entries */
	unsigned int num_entries;

	/* Total size of new entries */
	unsigned int size;

	/* Hook entry points. */
	unsigned int hook_entry[NF_ARP_NUMHOOKS];

	/* Underflow points. */
	unsigned int underflow[NF_ARP_NUMHOOKS];

	/* Information about old entries: */
	/* Number of counters (must be equal to current number of entries). */
	unsigned int num_counters;
	/* The old entries' counters. */
	struct xt_counters __user *counters;

	/* The entries (hang off end: not really an array). */
	struct arpt_entry entries[0];
};

/* The argument to ARPT_SO_ADD_COUNTERS. */
#define arpt_counters_info xt_counters_info
#define arpt_counters xt_counters

/* The argument to ARPT_SO_GET_ENTRIES. */
struct arpt_get_entries {
	/* Which table: user fills this in. */
	char name[ARPT_TABLE_MAXNAMELEN];

	/* User fills this in: total entry size. */
	unsigned int size;

	/* The entries. */
	struct arpt_entry entrytable[0];
};

/* Standard return verdict, or do jump. */
#define ARPT_STANDARD_TARGET XT_STANDARD_TARGET
/* Error verdict. */
#define ARPT_ERROR_TARGET XT_ERROR_TARGET

/* Helper functions */
static __inline__ struct arpt_entry_target *arpt_get_target(struct arpt_entry *e)
{
	return (void *)e + e->target_offset;
}

#ifndef __KERNEL__
/* fn returns 0 to continue iteration */
#define ARPT_ENTRY_ITERATE(entries, size, fn, args...) \
	XT_ENTRY_ITERATE(struct arpt_entry, entries, size, fn, ## args)
#endif

/*
 *	Main firewall chains definitions and global var's definitions.
 */
#ifdef __KERNEL__

/* Standard entry. */
struct arpt_standard {
	struct arpt_entry entry;
	struct arpt_standard_target target;
};

struct arpt_error_target {
	struct arpt_entry_target target;
	char errorname[ARPT_FUNCTION_MAXNAMELEN];
};

struct arpt_error {
	struct arpt_entry entry;
	struct arpt_error_target target;
};

#define ARPT_ENTRY_INIT(__size)						       \
{									       \
	.target_offset	= sizeof(struct arpt_entry),			       \
	.next_offset	= (__size),					       \
}

#define ARPT_STANDARD_INIT(__verdict)					       \
{									       \
	.entry		= ARPT_ENTRY_INIT(sizeof(struct arpt_standard)),       \
	.target		= XT_TARGET_INIT(ARPT_STANDARD_TARGET,		       \
					 sizeof(struct arpt_standard_target)), \
	.target.verdict	= -(__verdict) - 1,				       \
}

#define ARPT_ERROR_INIT							       \
{									       \
	.entry		= ARPT_ENTRY_INIT(sizeof(struct arpt_error)),	       \
	.target		= XT_TARGET_INIT(ARPT_ERROR_TARGET,		       \
					 sizeof(struct arpt_error_target)),    \
	.target.errorname = "ERROR",					       \
}

extern void *arpt_alloc_initial_table(const struct xt_table *);
extern struct xt_table *arpt_register_table(struct net *net,
					    const struct xt_table *table,
					    const struct arpt_replace *repl);
extern void arpt_unregister_table(struct xt_table *table);
extern unsigned int arpt_do_table(struct sk_buff *skb,
				  unsigned int hook,
				  const struct net_device *in,
				  const struct net_device *out,
				  struct xt_table *table);

#define ARPT_ALIGN(s) XT_ALIGN(s)

#ifdef CONFIG_COMPAT
#include <net/compat.h>

struct compat_arpt_entry {
	struct arpt_arp arp;
	u_int16_t target_offset;
	u_int16_t next_offset;
	compat_uint_t comefrom;
	struct compat_xt_counters counters;
	unsigned char elems[0];
};

static inline struct arpt_entry_target *
compat_arpt_get_target(struct compat_arpt_entry *e)
{
	return (void *)e + e->target_offset;
}

#define COMPAT_ARPT_ALIGN(s)	COMPAT_XT_ALIGN(s)

#endif /* CONFIG_COMPAT */
#endif /*__KERNEL__*/
#endif /* _ARPTABLES_H */