arc-linux-uclibc/usr/include/linux/amba/clcd.h - toolchains/skids - Git at Google

 /*
  * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
  *
  * David A Rusling
  *
  * Copyright (C) 2001 ARM Limited
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive
  * for more details.
  */
 #include <linux/fb.h>

 /*
  * CLCD Controller Internal Register addresses
  */
 #define CLCD_TIM0		0x00000000
 #define CLCD_TIM1 		0x00000004
 #define CLCD_TIM2 		0x00000008
 #define CLCD_TIM3 		0x0000000c
 #define CLCD_UBAS 		0x00000010
 #define CLCD_LBAS 		0x00000014

 #define CLCD_PL110_IENB		0x00000018
 #define CLCD_PL110_CNTL		0x0000001c
 #define CLCD_PL110_STAT		0x00000020
 #define CLCD_PL110_INTR 	0x00000024
 #define CLCD_PL110_UCUR		0x00000028
 #define CLCD_PL110_LCUR		0x0000002C

 #define CLCD_PL111_CNTL		0x00000018
 #define CLCD_PL111_IENB		0x0000001c
 #define CLCD_PL111_RIS		0x00000020
 #define CLCD_PL111_MIS		0x00000024
 #define CLCD_PL111_ICR		0x00000028
 #define CLCD_PL111_UCUR		0x0000002c
 #define CLCD_PL111_LCUR		0x00000030

 #define CLCD_PALL 		0x00000200
 #define CLCD_PALETTE		0x00000200

 #define TIM2_CLKSEL		(1 << 5)
 #define TIM2_IVS		(1 << 11)
 #define TIM2_IHS		(1 << 12)
 #define TIM2_IPC		(1 << 13)
 #define TIM2_IOE		(1 << 14)
 #define TIM2_BCD		(1 << 26)

 #define CNTL_LCDEN		(1 << 0)
 #define CNTL_LCDBPP1		(0 << 1)
 #define CNTL_LCDBPP2		(1 << 1)
 #define CNTL_LCDBPP4		(2 << 1)
 #define CNTL_LCDBPP8		(3 << 1)
 #define CNTL_LCDBPP16		(4 << 1)
 #define CNTL_LCDBPP16_565	(6 << 1)
 #define CNTL_LCDBPP24		(5 << 1)
 #define CNTL_LCDBW		(1 << 4)
 #define CNTL_LCDTFT		(1 << 5)
 #define CNTL_LCDMONO8		(1 << 6)
 #define CNTL_LCDDUAL		(1 << 7)
 #define CNTL_BGR		(1 << 8)
 #define CNTL_BEBO		(1 << 9)
 #define CNTL_BEPO		(1 << 10)
 #define CNTL_LCDPWR		(1 << 11)
 #define CNTL_LCDVCOMP(x)	((x) << 12)
 #define CNTL_LDMAFIFOTIME	(1 << 15)
 #define CNTL_WATERMARK		(1 << 16)

 struct clcd_panel {
 	struct fb_videomode	mode;
 	signed short		width;	/* width in mm */
 	signed short		height;	/* height in mm */
 	u32			tim2;
 	u32			tim3;
 	u32			cntl;
 	unsigned int		bpp:8,
 				fixedtimings:1,
 				grayscale:1;
 	unsigned int		connector;
 };

 struct clcd_regs {
 	u32			tim0;
 	u32			tim1;
 	u32			tim2;
 	u32			tim3;
 	u32			cntl;
 	unsigned long		pixclock;
 };

 struct clcd_fb;

 /*
  * the board-type specific routines
  */
 struct clcd_board {
 	const char *name;

 	/*
 	 * Optional.  Check whether the var structure is acceptable
 	 * for this display.
 	 */
 	int	(*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);

 	/*
 	 * Compulsary.  Decode fb->fb.var into regs->*.  In the case of
 	 * fixed timing, set regs->* to the register values required.
 	 */
 	void	(*decode)(struct clcd_fb *fb, struct clcd_regs *regs);

 	/*
 	 * Optional.  Disable any extra display hardware.
 	 */
 	void	(*disable)(struct clcd_fb *);

 	/*
 	 * Optional.  Enable any extra display hardware.
 	 */
 	void	(*enable)(struct clcd_fb *);

 	/*
 	 * Setup platform specific parts of CLCD driver
 	 */
 	int	(*setup)(struct clcd_fb *);

 	/*
 	 * mmap the framebuffer memory
 	 */
 	int	(*mmap)(struct clcd_fb *, struct vm_area_struct *);

 	/*
 	 * Remove platform specific parts of CLCD driver
 	 */
 	void	(*remove)(struct clcd_fb *);
 };

 struct amba_device;
 struct clk;

 /* this data structure describes each frame buffer device we find */
 struct clcd_fb {
 	struct fb_info		fb;
 	struct amba_device	*dev;
 	struct clk		*clk;
 	struct clcd_panel	*panel;
 	struct clcd_board	*board;
 	void			*board_data;
 	void __iomem		*regs;
 	u16			off_ienb;
 	u16			off_cntl;
 	u32			clcd_cntl;
 	u32			cmap[16];
 };

 static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
 {
 	u32 val, cpl;

 	/*
 	 * Program the CLCD controller registers and start the CLCD
 	 */
 	val = ((fb->fb.var.xres / 16) - 1) << 2;
 	val |= (fb->fb.var.hsync_len - 1) << 8;
 	val |= (fb->fb.var.right_margin - 1) << 16;
 	val |= (fb->fb.var.left_margin - 1) << 24;
 	regs->tim0 = val;

 	val = fb->fb.var.yres;
 	if (fb->panel->cntl & CNTL_LCDDUAL)
 		val /= 2;
 	val -= 1;
 	val |= (fb->fb.var.vsync_len - 1) << 10;
 	val |= fb->fb.var.lower_margin << 16;
 	val |= fb->fb.var.upper_margin << 24;
 	regs->tim1 = val;

 	val = fb->panel->tim2;
 	val |= fb->fb.var.sync & FB_SYNC_HOR_HIGH_ACT  ? 0 : TIM2_IHS;
 	val |= fb->fb.var.sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;

 	cpl = fb->fb.var.xres_virtual;
 	if (fb->panel->cntl & CNTL_LCDTFT)	  /* TFT */
 		/* / 1 */;
 	else if (!fb->fb.var.grayscale)		  /* STN color */
 		cpl = cpl * 8 / 3;
 	else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */
 		cpl /= 8;
 	else					  /* STN monochrome, 4bit */
 		cpl /= 4;

 	regs->tim2 = val | ((cpl - 1) << 16);

 	regs->tim3 = fb->panel->tim3;

 	val = fb->panel->cntl;
 	if (fb->fb.var.grayscale)
 		val |= CNTL_LCDBW;

 	switch (fb->fb.var.bits_per_pixel) {
 	case 1:
 		val |= CNTL_LCDBPP1;
 		break;
 	case 2:
 		val |= CNTL_LCDBPP2;
 		break;
 	case 4:
 		val |= CNTL_LCDBPP4;
 		break;
 	case 8:
 		val |= CNTL_LCDBPP8;
 		break;
 	case 16:
 		/*
 		 * PL110 cannot choose between 5551 and 565 modes in
 		 * its control register
 		 */
 		if ((fb->dev->periphid & 0x000fffff) == 0x00041110)
 			val |= CNTL_LCDBPP16;
 		else if (fb->fb.var.green.length == 5)
 			val |= CNTL_LCDBPP16;
 		else
 			val |= CNTL_LCDBPP16_565;
 		break;
 	case 32:
 		val |= CNTL_LCDBPP24;
 		break;
 	}

 	regs->cntl = val;
 	regs->pixclock = fb->fb.var.pixclock;
 }

 static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
 {
 	var->xres_virtual = var->xres = (var->xres + 15) & ~15;
 	var->yres_virtual = var->yres = (var->yres + 1) & ~1;

 #define CHECK(e,l,h) (var->e < l || var->e > h)
 	if (CHECK(right_margin, (5+1), 256) ||	/* back porch */
 	    CHECK(left_margin, (5+1), 256) ||	/* front porch */
 	    CHECK(hsync_len, (5+1), 256) ||
 	    var->xres > 4096 ||
 	    var->lower_margin > 255 ||		/* back porch */
 	    var->upper_margin > 255 ||		/* front porch */
 	    var->vsync_len > 32 ||
 	    var->yres > 1024)
 		return -EINVAL;
 #undef CHECK

 	/* single panel mode: PCD = max(PCD, 1) */
 	/* dual panel mode: PCD = max(PCD, 5) */

 	/*
 	 * You can't change the grayscale setting, and
 	 * we can only do non-interlaced video.
 	 */
 	if (var->grayscale != fb->fb.var.grayscale ||
 	    (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
 		return -EINVAL;

 #define CHECK(e) (var->e != fb->fb.var.e)
 	if (fb->panel->fixedtimings &&
 	    (CHECK(xres)		||
 	     CHECK(yres)		||
 	     CHECK(bits_per_pixel)	||
 	     CHECK(pixclock)		||
 	     CHECK(left_margin)		||
 	     CHECK(right_margin)	||
 	     CHECK(upper_margin)	||
 	     CHECK(lower_margin)	||
 	     CHECK(hsync_len)		||
 	     CHECK(vsync_len)		||
 	     CHECK(sync)))
 		return -EINVAL;
 #undef CHECK

 	var->nonstd = 0;
 	var->accel_flags = 0;

 	return 0;
 }
	/*
	* linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
	*
	* David A Rusling
	*
	* Copyright (C) 2001 ARM Limited
	*
	* This file is subject to the terms and conditions of the GNU General Public
	* License. See the file COPYING in the main directory of this archive
	* for more details.
	*/
	#include <linux/fb.h>

	/*
	* CLCD Controller Internal Register addresses
	*/
	#define CLCD_TIM0 0x00000000
	#define CLCD_TIM1 0x00000004
	#define CLCD_TIM2 0x00000008
	#define CLCD_TIM3 0x0000000c
	#define CLCD_UBAS 0x00000010
	#define CLCD_LBAS 0x00000014

	#define CLCD_PL110_IENB 0x00000018
	#define CLCD_PL110_CNTL 0x0000001c
	#define CLCD_PL110_STAT 0x00000020
	#define CLCD_PL110_INTR 0x00000024
	#define CLCD_PL110_UCUR 0x00000028
	#define CLCD_PL110_LCUR 0x0000002C

	#define CLCD_PL111_CNTL 0x00000018
	#define CLCD_PL111_IENB 0x0000001c
	#define CLCD_PL111_RIS 0x00000020
	#define CLCD_PL111_MIS 0x00000024
	#define CLCD_PL111_ICR 0x00000028
	#define CLCD_PL111_UCUR 0x0000002c
	#define CLCD_PL111_LCUR 0x00000030

	#define CLCD_PALL 0x00000200
	#define CLCD_PALETTE 0x00000200

	#define TIM2_CLKSEL (1 << 5)
	#define TIM2_IVS (1 << 11)
	#define TIM2_IHS (1 << 12)
	#define TIM2_IPC (1 << 13)
	#define TIM2_IOE (1 << 14)
	#define TIM2_BCD (1 << 26)

	#define CNTL_LCDEN (1 << 0)
	#define CNTL_LCDBPP1 (0 << 1)
	#define CNTL_LCDBPP2 (1 << 1)
	#define CNTL_LCDBPP4 (2 << 1)
	#define CNTL_LCDBPP8 (3 << 1)
	#define CNTL_LCDBPP16 (4 << 1)
	#define CNTL_LCDBPP16_565 (6 << 1)
	#define CNTL_LCDBPP24 (5 << 1)
	#define CNTL_LCDBW (1 << 4)
	#define CNTL_LCDTFT (1 << 5)
	#define CNTL_LCDMONO8 (1 << 6)
	#define CNTL_LCDDUAL (1 << 7)
	#define CNTL_BGR (1 << 8)
	#define CNTL_BEBO (1 << 9)
	#define CNTL_BEPO (1 << 10)
	#define CNTL_LCDPWR (1 << 11)
	#define CNTL_LCDVCOMP(x) ((x) << 12)
	#define CNTL_LDMAFIFOTIME (1 << 15)
	#define CNTL_WATERMARK (1 << 16)

	struct clcd_panel {
	struct fb_videomode mode;
	signed short width; /* width in mm */
	signed short height; /* height in mm */
	u32 tim2;
	u32 tim3;
	u32 cntl;
	unsigned int bpp:8,
	fixedtimings:1,
	grayscale:1;
	unsigned int connector;
	};

	struct clcd_regs {
	u32 tim0;
	u32 tim1;
	u32 tim2;
	u32 tim3;
	u32 cntl;
	unsigned long pixclock;
	};

	struct clcd_fb;

	/*
	* the board-type specific routines
	*/
	struct clcd_board {
	const char *name;

	/*
	* Optional. Check whether the var structure is acceptable
	* for this display.
	*/
	int (check)(struct clcd_fb fb, struct fb_var_screeninfo *var);

	/*
	* Compulsary. Decode fb->fb.var into regs->*. In the case of
	* fixed timing, set regs->* to the register values required.
	*/
	void (decode)(struct clcd_fb fb, struct clcd_regs *regs);

	/*
	* Optional. Disable any extra display hardware.
	*/
	void (disable)(struct clcd_fb );

	/*
	* Optional. Enable any extra display hardware.
	*/
	void (enable)(struct clcd_fb );

	/*
	* Setup platform specific parts of CLCD driver
	*/
	int (setup)(struct clcd_fb );

	/*
	* mmap the framebuffer memory
	*/
	int (mmap)(struct clcd_fb , struct vm_area_struct *);

	/*
	* Remove platform specific parts of CLCD driver
	*/
	void (remove)(struct clcd_fb );
	};

	struct amba_device;
	struct clk;

	/* this data structure describes each frame buffer device we find */
	struct clcd_fb {
	struct fb_info fb;
	struct amba_device *dev;
	struct clk *clk;
	struct clcd_panel *panel;
	struct clcd_board *board;
	void *board_data;
	void __iomem *regs;
	u16 off_ienb;
	u16 off_cntl;
	u32 clcd_cntl;
	u32 cmap[16];
	};

	static inline void clcdfb_decode(struct clcd_fb fb, struct clcd_regs regs)
	{
	u32 val, cpl;

	/*
	* Program the CLCD controller registers and start the CLCD
	*/
	val = ((fb->fb.var.xres / 16) - 1) << 2;
	val \|= (fb->fb.var.hsync_len - 1) << 8;
	val \|= (fb->fb.var.right_margin - 1) << 16;
	val \|= (fb->fb.var.left_margin - 1) << 24;
	regs->tim0 = val;

	val = fb->fb.var.yres;
	if (fb->panel->cntl & CNTL_LCDDUAL)
	val /= 2;
	val -= 1;
	val \|= (fb->fb.var.vsync_len - 1) << 10;
	val \|= fb->fb.var.lower_margin << 16;
	val \|= fb->fb.var.upper_margin << 24;
	regs->tim1 = val;

	val = fb->panel->tim2;
	val \|= fb->fb.var.sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS;
	val \|= fb->fb.var.sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;

	cpl = fb->fb.var.xres_virtual;
	if (fb->panel->cntl & CNTL_LCDTFT) /* TFT */
	/* / 1 */;
	else if (!fb->fb.var.grayscale) /* STN color */
	cpl = cpl * 8 / 3;
	else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */
	cpl /= 8;
	else /* STN monochrome, 4bit */
	cpl /= 4;

	regs->tim2 = val \| ((cpl - 1) << 16);

	regs->tim3 = fb->panel->tim3;

	val = fb->panel->cntl;
	if (fb->fb.var.grayscale)
	val \|= CNTL_LCDBW;

	switch (fb->fb.var.bits_per_pixel) {
	case 1:
	val \|= CNTL_LCDBPP1;
	break;
	case 2:
	val \|= CNTL_LCDBPP2;
	break;
	case 4:
	val \|= CNTL_LCDBPP4;
	break;
	case 8:
	val \|= CNTL_LCDBPP8;
	break;
	case 16:
	/*
	* PL110 cannot choose between 5551 and 565 modes in
	* its control register
	*/
	if ((fb->dev->periphid & 0x000fffff) == 0x00041110)
	val \|= CNTL_LCDBPP16;
	else if (fb->fb.var.green.length == 5)
	val \|= CNTL_LCDBPP16;
	else
	val \|= CNTL_LCDBPP16_565;
	break;
	case 32:
	val \|= CNTL_LCDBPP24;
	break;
	}

	regs->cntl = val;
	regs->pixclock = fb->fb.var.pixclock;
	}

	static inline int clcdfb_check(struct clcd_fb fb, struct fb_var_screeninfo var)
	{
	var->xres_virtual = var->xres = (var->xres + 15) & ~15;
	var->yres_virtual = var->yres = (var->yres + 1) & ~1;

	#define CHECK(e,l,h) (var->e < l \|\| var->e > h)
	if (CHECK(right_margin, (5+1), 256) \|\| /* back porch */
	CHECK(left_margin, (5+1), 256) \|\| /* front porch */
	CHECK(hsync_len, (5+1), 256) \|\|
	var->xres > 4096 \|\|
	var->lower_margin > 255 \|\| /* back porch */
	var->upper_margin > 255 \|\| /* front porch */
	var->vsync_len > 32 \|\|
	var->yres > 1024)
	return -EINVAL;
	#undef CHECK

	/* single panel mode: PCD = max(PCD, 1) */
	/* dual panel mode: PCD = max(PCD, 5) */

	/*
	* You can't change the grayscale setting, and
	* we can only do non-interlaced video.
	*/
	if (var->grayscale != fb->fb.var.grayscale \|\|
	(var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
	return -EINVAL;

	#define CHECK(e) (var->e != fb->fb.var.e)
	if (fb->panel->fixedtimings &&
	(CHECK(xres) \|\|
	CHECK(yres) \|\|
	CHECK(bits_per_pixel) \|\|
	CHECK(pixclock) \|\|
	CHECK(left_margin) \|\|
	CHECK(right_margin) \|\|
	CHECK(upper_margin) \|\|
	CHECK(lower_margin) \|\|
	CHECK(hsync_len) \|\|
	CHECK(vsync_len) \|\|
	CHECK(sync)))
	return -EINVAL;
	#undef CHECK

	var->nonstd = 0;
	var->accel_flags = 0;

	return 0;
	}