| # |
| # Bus Devices |
| # |
| |
| menu "Bus devices" |
| |
| config ARM_CCI |
| bool |
| |
| config ARM_CCI400_COMMON |
| bool |
| select ARM_CCI |
| |
| config ARM_CCI400_PMU |
| bool "ARM CCI400 PMU support" |
| default y |
| depends on ARM || ARM64 |
| depends on HW_PERF_EVENTS |
| select ARM_CCI400_COMMON |
| help |
| Support for PMU events monitoring on the ARM CCI cache coherent |
| interconnect. |
| |
| If unsure, say Y |
| |
| config ARM_CCI400_PORT_CTRL |
| bool |
| depends on ARM && OF && CPU_V7 |
| select ARM_CCI400_COMMON |
| help |
| Low level power management driver for CCI400 cache coherent |
| interconnect for ARM platforms. |
| |
| config ARM_CCN |
| bool "ARM CCN driver support" |
| depends on ARM || ARM64 |
| depends on PERF_EVENTS |
| help |
| PMU (perf) driver supporting the ARM CCN (Cache Coherent Network) |
| interconnect. |
| |
| config BRCMSTB_GISB_ARB |
| bool "Broadcom STB GISB bus arbiter" |
| depends on ARM || ARM64 || MIPS |
| help |
| Driver for the Broadcom Set Top Box System-on-a-chip internal bus |
| arbiter. This driver provides timeout and target abort error handling |
| and internal bus master decoding. |
| |
| config IMX_WEIM |
| bool "Freescale EIM DRIVER" |
| depends on ARCH_MXC |
| help |
| Driver for i.MX WEIM controller. |
| The WEIM(Wireless External Interface Module) works like a bus. |
| You can attach many different devices on it, such as NOR, onenand. |
| |
| config MIPS_CDMM |
| bool "MIPS Common Device Memory Map (CDMM) Driver" |
| depends on CPU_MIPSR2 |
| help |
| Driver needed for the MIPS Common Device Memory Map bus in MIPS |
| cores. This bus is for per-CPU tightly coupled devices such as the |
| Fast Debug Channel (FDC). |
| |
| For this to work, either your bootloader needs to enable the CDMM |
| region at an unused physical address on the boot CPU, or else your |
| platform code needs to implement mips_cdmm_phys_base() (see |
| asm/cdmm.h). |
| |
| config MVEBU_MBUS |
| bool |
| depends on PLAT_ORION |
| help |
| Driver needed for the MBus configuration on Marvell EBU SoCs |
| (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP). |
| |
| config OMAP_INTERCONNECT |
| tristate "OMAP INTERCONNECT DRIVER" |
| depends on ARCH_OMAP2PLUS |
| |
| help |
| Driver to enable OMAP interconnect error handling driver. |
| |
| config OMAP_OCP2SCP |
| tristate "OMAP OCP2SCP DRIVER" |
| depends on ARCH_OMAP2PLUS |
| help |
| Driver to enable ocp2scp module which transforms ocp interface |
| protocol to scp protocol. In OMAP4, USB PHY is connected via |
| OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via |
| OCP2SCP. |
| |
| config SIMPLE_PM_BUS |
| bool "Simple Power-Managed Bus Driver" |
| depends on OF && PM |
| depends on ARCH_SHMOBILE || COMPILE_TEST |
| help |
| Driver for transparent busses that don't need a real driver, but |
| where the bus controller is part of a PM domain, or under the control |
| of a functional clock, and thus relies on runtime PM for managing |
| this PM domain and/or clock. |
| An example of such a bus controller is the Renesas Bus State |
| Controller (BSC, sometimes called "LBSC within Bus Bridge", or |
| "External Bus Interface") as found on several Renesas ARM SoCs. |
| |
| config VEXPRESS_CONFIG |
| bool "Versatile Express configuration bus" |
| default y if ARCH_VEXPRESS |
| depends on ARM || ARM64 |
| depends on OF |
| select REGMAP |
| help |
| Platform configuration infrastructure for the ARM Ltd. |
| Versatile Express. |
| endmenu |
