arch/arm/boot/dts/sun7i-a20-bananapro.dts - kernel/lockdown - Git at Google

 /*
  * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  *     You should have received a copy of the GNU General Public
  *     License along with this file; if not, write to the Free
  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  *     MA 02110-1301 USA
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 /dts-v1/;
 #include "sun7i-a20.dtsi"
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>

 / {
 	model = "LeMaker Banana Pro";
 	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";

 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_bananapro>;

 		blue {
 			label = "bananapro:blue:usr";
 			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
 		};

 		green {
 			label = "bananapro:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
 	};

 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gmac_power_pin_bananapro>;
 		regulator-name = "gmac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		startup-delay-us = <100000>;
 		enable-active-high;
 		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
 	};

 	reg_vmmc3: vmmc3 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
 		pinctrl-0 = <&vmmc3_pin_bananapro>;
 		regulator-name = "vmmc3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		enable-active-high;
 		gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>;
 	};
 };

 &ahci {
 	status = "okay";
 };

 &ehci0 {
 	status = "okay";
 };

 &ehci1 {
 	status = "okay";
 };

 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_pins_rgmii_a>;
 	phy = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";

 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
 };

 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";

 	axp209: pmic@34 {
 		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

 		interrupt-controller;
 		#interrupt-cells = <1>;
 	};
 };

 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };

 &ir0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir0_pins_a>;
 	status = "okay";
 };

 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
 	cd-inverted;
 	status = "okay";
 };

 &mmc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins_a>;
 	vmmc-supply = <&reg_vmmc3>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
 };

 &ohci0 {
 	status = "okay";
 };

 &ohci1 {
 	status = "okay";
 };

 &pio {
 	gmac_power_pin_bananapro: gmac_power_pin@0 {
 		allwinner,pins = "PH23";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};

 	led_pins_bananapro: led_pins@0 {
 		allwinner,pins = "PH24", "PG2";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};

 	mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
 		allwinner,pins = "PH10";
 		allwinner,function = "gpio_in";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};

 	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
 		allwinner,pins = "PH0";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};

 	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
 		allwinner,pins = "PH1";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};

 	vmmc3_pin_bananapro: vmmc3_pin@0 {
 		allwinner,pins = "PH22";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };

 &reg_usb1_vbus {
 	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
 	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
 	status = "okay";
 };

 &reg_usb2_vbus {
 	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
 	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 	status = "okay";
 };

 &spi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins_a>;
 	status = "okay";
 };

 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
 };

 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins_a>;
 	status = "okay";
 };

 &uart7 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart7_pins_a>;
 	status = "okay";
 };

 &usbphy {
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
 };
	/*
	* Copyright 2015 Hans de Goede <hdegoede@redhat.com>
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of the
	* License, or (at your option) any later version.
	*
	* This file is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public
	* License along with this file; if not, write to the Free
	* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
	* MA 02110-1301 USA
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	/dts-v1/;
	#include "sun7i-a20.dtsi"
	#include "sunxi-common-regulators.dtsi"
	#include <dt-bindings/gpio/gpio.h>
	#include <dt-bindings/interrupt-controller/arm-gic.h>

	/ {
	model = "LeMaker Banana Pro";
	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";

	leds {
	compatible = "gpio-leds";
	pinctrl-names = "default";
	pinctrl-0 = <&led_pins_bananapro>;

	blue {
	label = "bananapro:blue:usr";
	gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
	};

	green {
	label = "bananapro:green:usr";
	gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
	};
	};

	reg_gmac_3v3: gmac-3v3 {
	compatible = "regulator-fixed";
	pinctrl-names = "default";
	pinctrl-0 = <&gmac_power_pin_bananapro>;
	regulator-name = "gmac-3v3";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	startup-delay-us = <100000>;
	enable-active-high;
	gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
	};

	reg_vmmc3: vmmc3 {
	compatible = "regulator-fixed";
	pinctrl-names = "default";
	pinctrl-0 = <&vmmc3_pin_bananapro>;
	regulator-name = "vmmc3";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	enable-active-high;
	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>;
	};
	};

	&ahci {
	status = "okay";
	};

	&ehci0 {
	status = "okay";
	};

	&ehci1 {
	status = "okay";
	};

	&gmac {
	pinctrl-names = "default";
	pinctrl-0 = <&gmac_pins_rgmii_a>;
	phy = <&phy1>;
	phy-mode = "rgmii";
	phy-supply = <&reg_gmac_3v3>;
	status = "okay";

	phy1: ethernet-phy@1 {
	reg = <1>;
	};
	};

	&i2c0 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_pins_a>;
	status = "okay";

	axp209: pmic@34 {
	compatible = "x-powers,axp209";
	reg = <0x34>;
	interrupt-parent = <&nmi_intc>;
	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

	interrupt-controller;
	#interrupt-cells = <1>;
	};
	};

	&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins_a>;
	status = "okay";
	};

	&ir0 {
	pinctrl-names = "default";
	pinctrl-0 = <&ir0_pins_a>;
	status = "okay";
	};

	&mmc0 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
	vmmc-supply = <&reg_vcc3v3>;
	bus-width = <4>;
	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
	cd-inverted;
	status = "okay";
	};

	&mmc3 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc3_pins_a>;
	vmmc-supply = <&reg_vmmc3>;
	bus-width = <4>;
	non-removable;
	status = "okay";
	};

	&ohci0 {
	status = "okay";
	};

	&ohci1 {
	status = "okay";
	};

	&pio {
	gmac_power_pin_bananapro: gmac_power_pin@0 {
	allwinner,pins = "PH23";
	allwinner,function = "gpio_out";
	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	led_pins_bananapro: led_pins@0 {
	allwinner,pins = "PH24", "PG2";
	allwinner,function = "gpio_out";
	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
	allwinner,pins = "PH10";
	allwinner,function = "gpio_in";
	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
	};

	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
	allwinner,pins = "PH0";
	allwinner,function = "gpio_out";
	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
	allwinner,pins = "PH1";
	allwinner,function = "gpio_out";
	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	vmmc3_pin_bananapro: vmmc3_pin@0 {
	allwinner,pins = "PH22";
	allwinner,function = "gpio_out";
	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};
	};

	&reg_usb1_vbus {
	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
	status = "okay";
	};

	&reg_usb2_vbus {
	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
	status = "okay";
	};

	&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi0_pins_a>;
	status = "okay";
	};

	&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pins_a>;
	status = "okay";
	};

	&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins_a>;
	status = "okay";
	};

	&uart7 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart7_pins_a>;
	status = "okay";
	};

	&usbphy {
	usb1_vbus-supply = <&reg_usb1_vbus>;
	usb2_vbus-supply = <&reg_usb2_vbus>;
	status = "okay";
	};