blob: 0a7304beb417713c82d25a6a35b5daafef5c4e76 [file] [log] [blame]
/*
* Copyright (c) 2014 Romain Perier <romain.perier@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "rk3066a.dtsi"
/ {
model = "MarsBoard RK3066";
compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
memory {
reg = <0x60000000 0x40000000>;
};
vcc_sd0: sdmmc-regulator {
compatible = "regulator-fixed";
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
vsys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vsys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
tps: tps@2d {
reg = <0x2d>;
interrupt-parent = <&gpio6>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
vcc1-supply = <&vsys>;
vcc2-supply = <&vsys>;
vcc3-supply = <&vsys>;
vcc4-supply = <&vsys>;
vcc5-supply = <&vcc_io>;
vcc6-supply = <&vcc_io>;
vcc7-supply = <&vsys>;
vccio-supply = <&vsys>;
regulators {
vcc_rtc: regulator@0 {
regulator-name = "vcc_rtc";
regulator-always-on;
};
vcc_io: regulator@1 {
regulator-name = "vcc_io";
regulator-always-on;
};
vdd_arm: regulator@2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
vcc_ddr: regulator@3 {
regulator-name = "vcc_ddr";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
vcc18_cif: regulator@5 {
regulator-name = "vcc18_cif";
regulator-always-on;
};
vdd_11: regulator@6 {
regulator-name = "vdd_11";
regulator-always-on;
};
vcc_25: regulator@7 {
regulator-name = "vcc_25";
regulator-always-on;
};
vcc_18: regulator@8 {
regulator-name = "vcc_18";
regulator-always-on;
};
vcc25_hdmi: regulator@9 {
regulator-name = "vcc25_hdmi";
regulator-always-on;
};
vcca_33: regulator@10 {
regulator-name = "vcca_33";
regulator-always-on;
};
vcc_rmii: regulator@11 {
regulator-name = "vcc_rmii";
};
vcc28_cif: regulator@12 {
regulator-name = "vcc28_cif";
regulator-always-on;
};
};
};
};
/* must be included after &tps gets defined */
#include "tps65910.dtsi"
&emac {
status = "okay";
phy = <&phy0>;
phy-supply = <&vcc_rmii>;
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
phy0: ethernet-phy@0 {
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
};
};
&pinctrl {
lan8720a {
phy_int: phy-int {
rockchip,pins = <RK_GPIO1 26 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&wdt {
status = "okay";
};