blob: eb618907c7dee35446ae8b2153cf566e91cdb689 [file] [log] [blame]
* Dialog Semiconductor DA9211/DA9213 Voltage Regulator
Required properties:
- compatible: "dlg,da9211" or "dlg,da9213".
- reg: I2C slave address, usually 0x68.
- interrupts: the interrupt outputs of the controller
- regulators: A node that houses a sub-node for each regulator within the
device. Each sub-node is identified using the node's name, with valid
values listed below. The content of each sub-node is defined by the
standard binding for regulators; see regulator.txt.
BUCKA and BUCKB.
Optional properties:
- enable-gpios: platform gpio for control of BUCKA/BUCKB.
- Any optional property defined in regulator.txt
Example 1) DA9211
pmic: da9211@68 {
compatible = "dlg,da9211";
reg = <0x68>;
interrupts = <3 27>;
regulators {
BUCKA {
regulator-name = "VBUCKA";
regulator-min-microvolt = < 300000>;
regulator-max-microvolt = <1570000>;
regulator-min-microamp = <2000000>;
regulator-max-microamp = <5000000>;
enable-gpios = <&gpio 27 0>;
};
BUCKB {
regulator-name = "VBUCKB";
regulator-min-microvolt = < 300000>;
regulator-max-microvolt = <1570000>;
regulator-min-microamp = <2000000>;
regulator-max-microamp = <5000000>;
enable-gpios = <&gpio 17 0>;
};
};
};
Example 2) DA9213
pmic: da9213@68 {
compatible = "dlg,da9213";
reg = <0x68>;
interrupts = <3 27>;
regulators {
BUCKA {
regulator-name = "VBUCKA";
regulator-min-microvolt = < 300000>;
regulator-max-microvolt = <1570000>;
regulator-min-microamp = <3000000>;
regulator-max-microamp = <6000000>;
enable-gpios = <&gpio 27 0>;
};
BUCKB {
regulator-name = "VBUCKB";
regulator-min-microvolt = < 300000>;
regulator-max-microvolt = <1570000>;
regulator-min-microamp = <3000000>;
regulator-max-microamp = <6000000>;
enable-gpios = <&gpio 17 0>;
};
};
};