blob: 1ace61b3aef18547041b150c12577a26d4637cec [file] [log] [blame]
Generic on-chip SRAM
Simple IO memory regions to be managed by the genalloc API.
Required properties:
- compatible : "mmio-sram" for generic SRAM, or
"brcm,boot-sram" for the boot SRAM on Broadcom SoCs
- reg : SRAM iomem address range
Reserving sram areas:
---------------------
Each child of the sram node specifies a region of reserved memory. Each
child node should use a 'reg' property to specify a specific range of
reserved memory.
Following the generic-names recommended practice, node names should
reflect the purpose of the node. Unit address (@<address>) should be
appended to the name.
Required properties in the sram node:
- #address-cells, #size-cells : should use the same values as the root node
- ranges : standard definition, should translate from local addresses
within the sram to bus addresses
Required properties in the area nodes:
- reg : iomem address range, relative to the SRAM range
Optional properties in the area nodes:
- compatible : standard definition, should contain a vendor specific string
in the form <vendor>,[<device>-]<usage>
Example:
sram: sram@5c000000 {
compatible = "mmio-sram";
reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
#adress-cells = <1>;
#size-cells = <1>;
ranges = <0 0x5c000000 0x40000>;
smp-sram@100 {
compatible = "socvendor,smp-sram";
reg = <0x100 0x50>;
};
};