blob: a4e1cbc810c19e43f83a273bdb2f11e334bb5fe0 [file] [log] [blame]
* Texas Instruments Davinci I2C
This file provides information, what the device node for the
davinci i2c interface contain.
Required properties:
- compatible: "ti,davinci-i2c";
- reg : Offset and length of the register set for the device
Recommended properties :
- interrupts : standard interrupt property.
- clock-frequency : desired I2C bus clock frequency in Hz.
- ti,has-pfunc: boolean; if defined, it indicates that SoC supports PFUNC
registers. PFUNC registers allow to switch I2C pins to function as
GPIOs, so they can by toggled manually.
Example (enbw_cmc board):
i2c@1c22000 {
compatible = "ti,davinci-i2c";
reg = <0x22000 0x1000>;
clock-frequency = <100000>;
interrupts = <15>;
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <0>;
dtt@48 {
compatible = "national,lm75";
reg = <0x48>;
};
};