blob: c3b0db437c48da2bfa29431f3f45eae8c70597c1 [file] [log] [blame]
* Clock bindings for Freescale i.MX21
Required properties:
- compatible : Should be "fsl,imx21-ccm".
- reg : Address and length of the register set.
- interrupts : Should contain CCM interrupt.
- #clock-cells: Should be <1>.
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
for the full list of i.MX21 clock IDs.
Examples:
clks: ccm@10027000{
compatible = "fsl,imx21-ccm";
reg = <0x10027000 0x800>;
#clock-cells = <1>;
};
uart1: serial@1000a000 {
compatible = "fsl,imx21-uart";
reg = <0x1000a000 0x1000>;
interrupts = <20>;
clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
<&clks IMX21_CLK_PER1>;
clock-names = "ipg", "per";
status = "disabled";
};