blob: 29e3f1caebc0fd050c66fafc65a2d2f5efb19379 [file] [log] [blame]
/***************************************************************************
* Copyright (c) 1999-2014, Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Module Description:
* DO NOT EDIT THIS FILE DIRECTLY
*
* This module was generated magically with RDB from a source description
* file. You must edit the source file for changes to be made to this file.
*
*
* Date: Generated on Wed Sep 3 12:36:24 2014
* Full Compile MD5 Checksum 1e5d73e2e037f01f6ffd5061d00a97a7
* (minus title and desc)
* MD5 Checksum c8f174845d8a27ef5365467f1c7a712b
*
* Compiled with: RDB Utility combo_header.pl
* RDB Parser 3.0
* unknown unknown
* Perl Interpreter 5.008005
* Operating System linux
*
* Revision History:
*
* $brcm_Log: $
*
***************************************************************************/
#ifndef BCHP_GIO_H__
#define BCHP_GIO_H__
/***************************************************************************
*GIO - GPIO
***************************************************************************/
#define BCHP_GIO_ODEN_LO 0x2040a200 /* GENERAL PURPOSE I/O OPEN DRAIN ENABLE FOR GPIO[31:0] */
#define BCHP_GIO_DATA_LO 0x2040a204 /* GENERAL PURPOSE I/O DATA FOR GPIO[31:0] */
#define BCHP_GIO_IODIR_LO 0x2040a208 /* GENERAL PURPOSE I/O DIRECTION FOR GPIO[31:0] */
#define BCHP_GIO_EC_LO 0x2040a20c /* GENERAL PURPOSE I/O EDGE CONFIGURATION FOR GPIO[31:0] */
#define BCHP_GIO_EI_LO 0x2040a210 /* GENERAL PURPOSE I/O EDGE INSENSITIVE FOR GPIO[31:0] */
#define BCHP_GIO_MASK_LO 0x2040a214 /* GENERAL PURPOSE I/O INTERRUPT MASK FOR GPIO[31:0] */
#define BCHP_GIO_LEVEL_LO 0x2040a218 /* GENERAL PURPOSE I/O INTERRUPT TYPE FOR GPIO[31:0] */
#define BCHP_GIO_STAT_LO 0x2040a21c /* GENERAL PURPOSE I/O INTERRUPT STATUS FOR GPIO[31:0] */
#define BCHP_GIO_ODEN_HI 0x2040a220 /* GENERAL PURPOSE I/O OPEN DRAIN ENABLE FOR GPIO[63:32] */
#define BCHP_GIO_DATA_HI 0x2040a224 /* GENERAL PURPOSE I/O DATA FOR GPIO[63:32] */
#define BCHP_GIO_IODIR_HI 0x2040a228 /* GENERAL PURPOSE I/O DIRECTION FOR GPIO[63:32] */
#define BCHP_GIO_EC_HI 0x2040a22c /* GENERAL PURPOSE I/O EDGE CONFIGURATION FOR GPIO[63:32] */
#define BCHP_GIO_EI_HI 0x2040a230 /* GENERAL PURPOSE I/O EDGE INSENSITIVE FOR GPIO[63:32] */
#define BCHP_GIO_MASK_HI 0x2040a234 /* GENERAL PURPOSE I/O INTERRUPT MASK FOR GPIO[63:32] */
#define BCHP_GIO_LEVEL_HI 0x2040a238 /* GENERAL PURPOSE I/O INTERRUPT TYPE FOR GPIO[63:32] */
#define BCHP_GIO_STAT_HI 0x2040a23c /* GENERAL PURPOSE I/O INTERRUPT STATUS FOR GPIO[63:32] */
#define BCHP_GIO_ODEN_EXT_HI 0x2040a240 /* GENERAL PURPOSE I/O OPEN DRAIN ENABLE FOR GPIO[95:64] */
#define BCHP_GIO_DATA_EXT_HI 0x2040a244 /* GENERAL PURPOSE I/O DATA FOR GPIO[95:64] */
#define BCHP_GIO_IODIR_EXT_HI 0x2040a248 /* GENERAL PURPOSE I/O DIRECTION FOR GPIO[95:64] */
#define BCHP_GIO_EC_EXT_HI 0x2040a24c /* GENERAL PURPOSE I/O EDGE CONFIGURATION FOR GPIO[95:64] */
#define BCHP_GIO_EI_EXT_HI 0x2040a250 /* GENERAL PURPOSE I/O EDGE INSENSITIVE FOR GPIO[95:64] */
#define BCHP_GIO_MASK_EXT_HI 0x2040a254 /* GENERAL PURPOSE I/O INTERRUPT MASK FOR GPIO[95:64] */
#define BCHP_GIO_LEVEL_EXT_HI 0x2040a258 /* GENERAL PURPOSE I/O INTERRUPT TYPE FOR GPIO[95:64] */
#define BCHP_GIO_STAT_EXT_HI 0x2040a25c /* GENERAL PURPOSE I/O INTERRUPT STATUS FOR GPIO[95:64] */
#define BCHP_GIO_ODEN_EXT2 0x2040a260 /* GENERAL PURPOSE I/O OPEN DRAIN ENABLE FOR GPIO[102:96] */
#define BCHP_GIO_DATA_EXT2 0x2040a264 /* GENERAL PURPOSE I/O DATA FOR GPIO[102:96] */
#define BCHP_GIO_IODIR_EXT2 0x2040a268 /* GENERAL PURPOSE I/O DIRECTION FOR GPIO[102:96] */
#define BCHP_GIO_EC_EXT2 0x2040a26c /* GENERAL PURPOSE I/O EDGE CONFIGURATION FOR GPIO[102:96] */
#define BCHP_GIO_EI_EXT2 0x2040a270 /* GENERAL PURPOSE I/O EDGE INSENSITIVE FOR GPIO[102:96] */
#define BCHP_GIO_MASK_EXT2 0x2040a274 /* GENERAL PURPOSE I/O INTERRUPT MASK FOR GPIO[102:96] */
#define BCHP_GIO_LEVEL_EXT2 0x2040a278 /* GENERAL PURPOSE I/O INTERRUPT TYPE FOR GPIO[102:96] */
#define BCHP_GIO_STAT_EXT2 0x2040a27c /* GENERAL PURPOSE I/O INTERRUPT STATUS FOR GPIO[102:96] */
#define BCHP_GIO_ODEN_EXT 0x2040a280 /* GENERAL PURPOSE I/O OPEN DRAIN ENABLE FOR SGPIO[3:0] and AON_SGPIO[1:0] */
#define BCHP_GIO_DATA_EXT 0x2040a284 /* GENERAL PURPOSE I/O DATA FOR SGPIO[3:0] and AON_SGPIO[1:0] */
#define BCHP_GIO_IODIR_EXT 0x2040a288 /* GENERAL PURPOSE I/O DIRECTION FOR SGPIO[3:0] and AON_SGPIO[1:0] */
#define BCHP_GIO_EC_EXT 0x2040a28c /* GENERAL PURPOSE I/O EDGE CONFIGURATION FOR SGPIO[3:0] and AON_SGPIO[1:0] */
#define BCHP_GIO_EI_EXT 0x2040a290 /* GENERAL PURPOSE I/O EDGE INSENSITIVE FOR SGPIO[3:0] and AON_SGPIO[1:0] */
#define BCHP_GIO_MASK_EXT 0x2040a294 /* GENERAL PURPOSE I/O INTERRUPT MASK FOR SGPIO[3:0] and AON_SGPIO[1:0] */
#define BCHP_GIO_LEVEL_EXT 0x2040a298 /* GENERAL PURPOSE I/O INTERRUPT TYPE FOR SGPIO[3:0] and AON_SGPIO[1:0] */
#define BCHP_GIO_STAT_EXT 0x2040a29c /* GENERAL PURPOSE I/O INTERRUPT STATUS FOR SGPIO[3:0] and AON_SGPIO[1:0] */
/***************************************************************************
*ODEN_LO - GENERAL PURPOSE I/O OPEN DRAIN ENABLE FOR GPIO[31:0]
***************************************************************************/
/* GIO :: ODEN_LO :: oden [31:00] */
#define BCHP_GIO_ODEN_LO_oden_MASK 0xffffffff
#define BCHP_GIO_ODEN_LO_oden_SHIFT 0
#define BCHP_GIO_ODEN_LO_oden_DEFAULT 0x00000000
/***************************************************************************
*DATA_LO - GENERAL PURPOSE I/O DATA FOR GPIO[31:0]
***************************************************************************/
/* GIO :: DATA_LO :: data [31:00] */
#define BCHP_GIO_DATA_LO_data_MASK 0xffffffff
#define BCHP_GIO_DATA_LO_data_SHIFT 0
#define BCHP_GIO_DATA_LO_data_DEFAULT 0x00000000
/***************************************************************************
*IODIR_LO - GENERAL PURPOSE I/O DIRECTION FOR GPIO[31:0]
***************************************************************************/
/* GIO :: IODIR_LO :: iodir [31:00] */
#define BCHP_GIO_IODIR_LO_iodir_MASK 0xffffffff
#define BCHP_GIO_IODIR_LO_iodir_SHIFT 0
#define BCHP_GIO_IODIR_LO_iodir_DEFAULT 0xffffffff
/***************************************************************************
*EC_LO - GENERAL PURPOSE I/O EDGE CONFIGURATION FOR GPIO[31:0]
***************************************************************************/
/* GIO :: EC_LO :: edge_config [31:00] */
#define BCHP_GIO_EC_LO_edge_config_MASK 0xffffffff
#define BCHP_GIO_EC_LO_edge_config_SHIFT 0
#define BCHP_GIO_EC_LO_edge_config_DEFAULT 0x00000000
/***************************************************************************
*EI_LO - GENERAL PURPOSE I/O EDGE INSENSITIVE FOR GPIO[31:0]
***************************************************************************/
/* GIO :: EI_LO :: edge_insensitive [31:00] */
#define BCHP_GIO_EI_LO_edge_insensitive_MASK 0xffffffff
#define BCHP_GIO_EI_LO_edge_insensitive_SHIFT 0
#define BCHP_GIO_EI_LO_edge_insensitive_DEFAULT 0x00000000
/***************************************************************************
*MASK_LO - GENERAL PURPOSE I/O INTERRUPT MASK FOR GPIO[31:0]
***************************************************************************/
/* GIO :: MASK_LO :: irq_mask [31:00] */
#define BCHP_GIO_MASK_LO_irq_mask_MASK 0xffffffff
#define BCHP_GIO_MASK_LO_irq_mask_SHIFT 0
#define BCHP_GIO_MASK_LO_irq_mask_DEFAULT 0x00000000
/***************************************************************************
*LEVEL_LO - GENERAL PURPOSE I/O INTERRUPT TYPE FOR GPIO[31:0]
***************************************************************************/
/* GIO :: LEVEL_LO :: level [31:00] */
#define BCHP_GIO_LEVEL_LO_level_MASK 0xffffffff
#define BCHP_GIO_LEVEL_LO_level_SHIFT 0
#define BCHP_GIO_LEVEL_LO_level_DEFAULT 0x00000000
/***************************************************************************
*STAT_LO - GENERAL PURPOSE I/O INTERRUPT STATUS FOR GPIO[31:0]
***************************************************************************/
/* GIO :: STAT_LO :: irq_status [31:00] */
#define BCHP_GIO_STAT_LO_irq_status_MASK 0xffffffff
#define BCHP_GIO_STAT_LO_irq_status_SHIFT 0
#define BCHP_GIO_STAT_LO_irq_status_DEFAULT 0x00000000
/***************************************************************************
*ODEN_HI - GENERAL PURPOSE I/O OPEN DRAIN ENABLE FOR GPIO[63:32]
***************************************************************************/
/* GIO :: ODEN_HI :: oden [31:00] */
#define BCHP_GIO_ODEN_HI_oden_MASK 0xffffffff
#define BCHP_GIO_ODEN_HI_oden_SHIFT 0
#define BCHP_GIO_ODEN_HI_oden_DEFAULT 0x00000000
/***************************************************************************
*DATA_HI - GENERAL PURPOSE I/O DATA FOR GPIO[63:32]
***************************************************************************/
/* GIO :: DATA_HI :: data [31:00] */
#define BCHP_GIO_DATA_HI_data_MASK 0xffffffff
#define BCHP_GIO_DATA_HI_data_SHIFT 0
#define BCHP_GIO_DATA_HI_data_DEFAULT 0x00000000
/***************************************************************************
*IODIR_HI - GENERAL PURPOSE I/O DIRECTION FOR GPIO[63:32]
***************************************************************************/
/* GIO :: IODIR_HI :: iodir [31:00] */
#define BCHP_GIO_IODIR_HI_iodir_MASK 0xffffffff
#define BCHP_GIO_IODIR_HI_iodir_SHIFT 0
#define BCHP_GIO_IODIR_HI_iodir_DEFAULT 0xffffffff
/***************************************************************************
*EC_HI - GENERAL PURPOSE I/O EDGE CONFIGURATION FOR GPIO[63:32]
***************************************************************************/
/* GIO :: EC_HI :: edge_config [31:00] */
#define BCHP_GIO_EC_HI_edge_config_MASK 0xffffffff
#define BCHP_GIO_EC_HI_edge_config_SHIFT 0
#define BCHP_GIO_EC_HI_edge_config_DEFAULT 0x00000000
/***************************************************************************
*EI_HI - GENERAL PURPOSE I/O EDGE INSENSITIVE FOR GPIO[63:32]
***************************************************************************/
/* GIO :: EI_HI :: edge_insensitive [31:00] */
#define BCHP_GIO_EI_HI_edge_insensitive_MASK 0xffffffff
#define BCHP_GIO_EI_HI_edge_insensitive_SHIFT 0
#define BCHP_GIO_EI_HI_edge_insensitive_DEFAULT 0x00000000
/***************************************************************************
*MASK_HI - GENERAL PURPOSE I/O INTERRUPT MASK FOR GPIO[63:32]
***************************************************************************/
/* GIO :: MASK_HI :: irq_mask [31:00] */
#define BCHP_GIO_MASK_HI_irq_mask_MASK 0xffffffff
#define BCHP_GIO_MASK_HI_irq_mask_SHIFT 0
#define BCHP_GIO_MASK_HI_irq_mask_DEFAULT 0x00000000
/***************************************************************************
*LEVEL_HI - GENERAL PURPOSE I/O INTERRUPT TYPE FOR GPIO[63:32]
***************************************************************************/
/* GIO :: LEVEL_HI :: level [31:00] */
#define BCHP_GIO_LEVEL_HI_level_MASK 0xffffffff
#define BCHP_GIO_LEVEL_HI_level_SHIFT 0
#define BCHP_GIO_LEVEL_HI_level_DEFAULT 0x00000000
/***************************************************************************
*STAT_HI - GENERAL PURPOSE I/O INTERRUPT STATUS FOR GPIO[63:32]
***************************************************************************/
/* GIO :: STAT_HI :: irq_status [31:00] */
#define BCHP_GIO_STAT_HI_irq_status_MASK 0xffffffff
#define BCHP_GIO_STAT_HI_irq_status_SHIFT 0
#define BCHP_GIO_STAT_HI_irq_status_DEFAULT 0x00000000
/***************************************************************************
*ODEN_EXT_HI - GENERAL PURPOSE I/O OPEN DRAIN ENABLE FOR GPIO[95:64]
***************************************************************************/
/* GIO :: ODEN_EXT_HI :: oden [31:00] */
#define BCHP_GIO_ODEN_EXT_HI_oden_MASK 0xffffffff
#define BCHP_GIO_ODEN_EXT_HI_oden_SHIFT 0
#define BCHP_GIO_ODEN_EXT_HI_oden_DEFAULT 0x00000000
/***************************************************************************
*DATA_EXT_HI - GENERAL PURPOSE I/O DATA FOR GPIO[95:64]
***************************************************************************/
/* GIO :: DATA_EXT_HI :: data [31:00] */
#define BCHP_GIO_DATA_EXT_HI_data_MASK 0xffffffff
#define BCHP_GIO_DATA_EXT_HI_data_SHIFT 0
#define BCHP_GIO_DATA_EXT_HI_data_DEFAULT 0x00000000
/***************************************************************************
*IODIR_EXT_HI - GENERAL PURPOSE I/O DIRECTION FOR GPIO[95:64]
***************************************************************************/
/* GIO :: IODIR_EXT_HI :: iodir [31:00] */
#define BCHP_GIO_IODIR_EXT_HI_iodir_MASK 0xffffffff
#define BCHP_GIO_IODIR_EXT_HI_iodir_SHIFT 0
#define BCHP_GIO_IODIR_EXT_HI_iodir_DEFAULT 0xffffffff
/***************************************************************************
*EC_EXT_HI - GENERAL PURPOSE I/O EDGE CONFIGURATION FOR GPIO[95:64]
***************************************************************************/
/* GIO :: EC_EXT_HI :: edge_config [31:00] */
#define BCHP_GIO_EC_EXT_HI_edge_config_MASK 0xffffffff
#define BCHP_GIO_EC_EXT_HI_edge_config_SHIFT 0
#define BCHP_GIO_EC_EXT_HI_edge_config_DEFAULT 0x00000000
/***************************************************************************
*EI_EXT_HI - GENERAL PURPOSE I/O EDGE INSENSITIVE FOR GPIO[95:64]
***************************************************************************/
/* GIO :: EI_EXT_HI :: edge_insensitive [31:00] */
#define BCHP_GIO_EI_EXT_HI_edge_insensitive_MASK 0xffffffff
#define BCHP_GIO_EI_EXT_HI_edge_insensitive_SHIFT 0
#define BCHP_GIO_EI_EXT_HI_edge_insensitive_DEFAULT 0x00000000
/***************************************************************************
*MASK_EXT_HI - GENERAL PURPOSE I/O INTERRUPT MASK FOR GPIO[95:64]
***************************************************************************/
/* GIO :: MASK_EXT_HI :: irq_mask [31:00] */
#define BCHP_GIO_MASK_EXT_HI_irq_mask_MASK 0xffffffff
#define BCHP_GIO_MASK_EXT_HI_irq_mask_SHIFT 0
#define BCHP_GIO_MASK_EXT_HI_irq_mask_DEFAULT 0x00000000
/***************************************************************************
*LEVEL_EXT_HI - GENERAL PURPOSE I/O INTERRUPT TYPE FOR GPIO[95:64]
***************************************************************************/
/* GIO :: LEVEL_EXT_HI :: level [31:00] */
#define BCHP_GIO_LEVEL_EXT_HI_level_MASK 0xffffffff
#define BCHP_GIO_LEVEL_EXT_HI_level_SHIFT 0
#define BCHP_GIO_LEVEL_EXT_HI_level_DEFAULT 0x00000000
/***************************************************************************
*STAT_EXT_HI - GENERAL PURPOSE I/O INTERRUPT STATUS FOR GPIO[95:64]
***************************************************************************/
/* GIO :: STAT_EXT_HI :: irq_status [31:00] */
#define BCHP_GIO_STAT_EXT_HI_irq_status_MASK 0xffffffff
#define BCHP_GIO_STAT_EXT_HI_irq_status_SHIFT 0
#define BCHP_GIO_STAT_EXT_HI_irq_status_DEFAULT 0x00000000
/***************************************************************************
*ODEN_EXT2 - GENERAL PURPOSE I/O OPEN DRAIN ENABLE FOR GPIO[102:96]
***************************************************************************/
/* GIO :: ODEN_EXT2 :: reserved0 [31:07] */
#define BCHP_GIO_ODEN_EXT2_reserved0_MASK 0xffffff80
#define BCHP_GIO_ODEN_EXT2_reserved0_SHIFT 7
/* GIO :: ODEN_EXT2 :: oden [06:00] */
#define BCHP_GIO_ODEN_EXT2_oden_MASK 0x0000007f
#define BCHP_GIO_ODEN_EXT2_oden_SHIFT 0
#define BCHP_GIO_ODEN_EXT2_oden_DEFAULT 0x00000000
/***************************************************************************
*DATA_EXT2 - GENERAL PURPOSE I/O DATA FOR GPIO[102:96]
***************************************************************************/
/* GIO :: DATA_EXT2 :: reserved0 [31:07] */
#define BCHP_GIO_DATA_EXT2_reserved0_MASK 0xffffff80
#define BCHP_GIO_DATA_EXT2_reserved0_SHIFT 7
/* GIO :: DATA_EXT2 :: data [06:00] */
#define BCHP_GIO_DATA_EXT2_data_MASK 0x0000007f
#define BCHP_GIO_DATA_EXT2_data_SHIFT 0
#define BCHP_GIO_DATA_EXT2_data_DEFAULT 0x00000000
/***************************************************************************
*IODIR_EXT2 - GENERAL PURPOSE I/O DIRECTION FOR GPIO[102:96]
***************************************************************************/
/* GIO :: IODIR_EXT2 :: reserved0 [31:07] */
#define BCHP_GIO_IODIR_EXT2_reserved0_MASK 0xffffff80
#define BCHP_GIO_IODIR_EXT2_reserved0_SHIFT 7
/* GIO :: IODIR_EXT2 :: iodir [06:00] */
#define BCHP_GIO_IODIR_EXT2_iodir_MASK 0x0000007f
#define BCHP_GIO_IODIR_EXT2_iodir_SHIFT 0
#define BCHP_GIO_IODIR_EXT2_iodir_DEFAULT 0x0000007f
/***************************************************************************
*EC_EXT2 - GENERAL PURPOSE I/O EDGE CONFIGURATION FOR GPIO[102:96]
***************************************************************************/
/* GIO :: EC_EXT2 :: reserved0 [31:07] */
#define BCHP_GIO_EC_EXT2_reserved0_MASK 0xffffff80
#define BCHP_GIO_EC_EXT2_reserved0_SHIFT 7
/* GIO :: EC_EXT2 :: edge_config [06:00] */
#define BCHP_GIO_EC_EXT2_edge_config_MASK 0x0000007f
#define BCHP_GIO_EC_EXT2_edge_config_SHIFT 0
#define BCHP_GIO_EC_EXT2_edge_config_DEFAULT 0x00000000
/***************************************************************************
*EI_EXT2 - GENERAL PURPOSE I/O EDGE INSENSITIVE FOR GPIO[102:96]
***************************************************************************/
/* GIO :: EI_EXT2 :: reserved0 [31:07] */
#define BCHP_GIO_EI_EXT2_reserved0_MASK 0xffffff80
#define BCHP_GIO_EI_EXT2_reserved0_SHIFT 7
/* GIO :: EI_EXT2 :: edge_insensitive [06:00] */
#define BCHP_GIO_EI_EXT2_edge_insensitive_MASK 0x0000007f
#define BCHP_GIO_EI_EXT2_edge_insensitive_SHIFT 0
#define BCHP_GIO_EI_EXT2_edge_insensitive_DEFAULT 0x00000000
/***************************************************************************
*MASK_EXT2 - GENERAL PURPOSE I/O INTERRUPT MASK FOR GPIO[102:96]
***************************************************************************/
/* GIO :: MASK_EXT2 :: reserved0 [31:07] */
#define BCHP_GIO_MASK_EXT2_reserved0_MASK 0xffffff80
#define BCHP_GIO_MASK_EXT2_reserved0_SHIFT 7
/* GIO :: MASK_EXT2 :: irq_mask [06:00] */
#define BCHP_GIO_MASK_EXT2_irq_mask_MASK 0x0000007f
#define BCHP_GIO_MASK_EXT2_irq_mask_SHIFT 0
#define BCHP_GIO_MASK_EXT2_irq_mask_DEFAULT 0x00000000
/***************************************************************************
*LEVEL_EXT2 - GENERAL PURPOSE I/O INTERRUPT TYPE FOR GPIO[102:96]
***************************************************************************/
/* GIO :: LEVEL_EXT2 :: reserved0 [31:07] */
#define BCHP_GIO_LEVEL_EXT2_reserved0_MASK 0xffffff80
#define BCHP_GIO_LEVEL_EXT2_reserved0_SHIFT 7
/* GIO :: LEVEL_EXT2 :: level [06:00] */
#define BCHP_GIO_LEVEL_EXT2_level_MASK 0x0000007f
#define BCHP_GIO_LEVEL_EXT2_level_SHIFT 0
#define BCHP_GIO_LEVEL_EXT2_level_DEFAULT 0x00000000
/***************************************************************************
*STAT_EXT2 - GENERAL PURPOSE I/O INTERRUPT STATUS FOR GPIO[102:96]
***************************************************************************/
/* GIO :: STAT_EXT2 :: reserved0 [31:07] */
#define BCHP_GIO_STAT_EXT2_reserved0_MASK 0xffffff80
#define BCHP_GIO_STAT_EXT2_reserved0_SHIFT 7
/* GIO :: STAT_EXT2 :: irq_status [06:00] */
#define BCHP_GIO_STAT_EXT2_irq_status_MASK 0x0000007f
#define BCHP_GIO_STAT_EXT2_irq_status_SHIFT 0
#define BCHP_GIO_STAT_EXT2_irq_status_DEFAULT 0x00000000
/***************************************************************************
*ODEN_EXT - GENERAL PURPOSE I/O OPEN DRAIN ENABLE FOR SGPIO[3:0] and AON_SGPIO[1:0]
***************************************************************************/
/* GIO :: ODEN_EXT :: reserved0 [31:06] */
#define BCHP_GIO_ODEN_EXT_reserved0_MASK 0xffffffc0
#define BCHP_GIO_ODEN_EXT_reserved0_SHIFT 6
/* GIO :: ODEN_EXT :: oden [05:00] */
#define BCHP_GIO_ODEN_EXT_oden_MASK 0x0000003f
#define BCHP_GIO_ODEN_EXT_oden_SHIFT 0
#define BCHP_GIO_ODEN_EXT_oden_DEFAULT 0x00000000
/***************************************************************************
*DATA_EXT - GENERAL PURPOSE I/O DATA FOR SGPIO[3:0] and AON_SGPIO[1:0]
***************************************************************************/
/* GIO :: DATA_EXT :: reserved0 [31:06] */
#define BCHP_GIO_DATA_EXT_reserved0_MASK 0xffffffc0
#define BCHP_GIO_DATA_EXT_reserved0_SHIFT 6
/* GIO :: DATA_EXT :: data [05:00] */
#define BCHP_GIO_DATA_EXT_data_MASK 0x0000003f
#define BCHP_GIO_DATA_EXT_data_SHIFT 0
#define BCHP_GIO_DATA_EXT_data_DEFAULT 0x00000000
/***************************************************************************
*IODIR_EXT - GENERAL PURPOSE I/O DIRECTION FOR SGPIO[3:0] and AON_SGPIO[1:0]
***************************************************************************/
/* GIO :: IODIR_EXT :: reserved0 [31:06] */
#define BCHP_GIO_IODIR_EXT_reserved0_MASK 0xffffffc0
#define BCHP_GIO_IODIR_EXT_reserved0_SHIFT 6
/* GIO :: IODIR_EXT :: iodir [05:00] */
#define BCHP_GIO_IODIR_EXT_iodir_MASK 0x0000003f
#define BCHP_GIO_IODIR_EXT_iodir_SHIFT 0
#define BCHP_GIO_IODIR_EXT_iodir_DEFAULT 0x0000003f
/***************************************************************************
*EC_EXT - GENERAL PURPOSE I/O EDGE CONFIGURATION FOR SGPIO[3:0] and AON_SGPIO[1:0]
***************************************************************************/
/* GIO :: EC_EXT :: reserved0 [31:06] */
#define BCHP_GIO_EC_EXT_reserved0_MASK 0xffffffc0
#define BCHP_GIO_EC_EXT_reserved0_SHIFT 6
/* GIO :: EC_EXT :: edge_config [05:00] */
#define BCHP_GIO_EC_EXT_edge_config_MASK 0x0000003f
#define BCHP_GIO_EC_EXT_edge_config_SHIFT 0
#define BCHP_GIO_EC_EXT_edge_config_DEFAULT 0x00000000
/***************************************************************************
*EI_EXT - GENERAL PURPOSE I/O EDGE INSENSITIVE FOR SGPIO[3:0] and AON_SGPIO[1:0]
***************************************************************************/
/* GIO :: EI_EXT :: reserved0 [31:06] */
#define BCHP_GIO_EI_EXT_reserved0_MASK 0xffffffc0
#define BCHP_GIO_EI_EXT_reserved0_SHIFT 6
/* GIO :: EI_EXT :: edge_insensitive [05:00] */
#define BCHP_GIO_EI_EXT_edge_insensitive_MASK 0x0000003f
#define BCHP_GIO_EI_EXT_edge_insensitive_SHIFT 0
#define BCHP_GIO_EI_EXT_edge_insensitive_DEFAULT 0x00000000
/***************************************************************************
*MASK_EXT - GENERAL PURPOSE I/O INTERRUPT MASK FOR SGPIO[3:0] and AON_SGPIO[1:0]
***************************************************************************/
/* GIO :: MASK_EXT :: reserved0 [31:06] */
#define BCHP_GIO_MASK_EXT_reserved0_MASK 0xffffffc0
#define BCHP_GIO_MASK_EXT_reserved0_SHIFT 6
/* GIO :: MASK_EXT :: irq_mask [05:00] */
#define BCHP_GIO_MASK_EXT_irq_mask_MASK 0x0000003f
#define BCHP_GIO_MASK_EXT_irq_mask_SHIFT 0
#define BCHP_GIO_MASK_EXT_irq_mask_DEFAULT 0x00000000
/***************************************************************************
*LEVEL_EXT - GENERAL PURPOSE I/O INTERRUPT TYPE FOR SGPIO[3:0] and AON_SGPIO[1:0]
***************************************************************************/
/* GIO :: LEVEL_EXT :: reserved0 [31:06] */
#define BCHP_GIO_LEVEL_EXT_reserved0_MASK 0xffffffc0
#define BCHP_GIO_LEVEL_EXT_reserved0_SHIFT 6
/* GIO :: LEVEL_EXT :: level [05:00] */
#define BCHP_GIO_LEVEL_EXT_level_MASK 0x0000003f
#define BCHP_GIO_LEVEL_EXT_level_SHIFT 0
#define BCHP_GIO_LEVEL_EXT_level_DEFAULT 0x00000000
/***************************************************************************
*STAT_EXT - GENERAL PURPOSE I/O INTERRUPT STATUS FOR SGPIO[3:0] and AON_SGPIO[1:0]
***************************************************************************/
/* GIO :: STAT_EXT :: reserved0 [31:06] */
#define BCHP_GIO_STAT_EXT_reserved0_MASK 0xffffffc0
#define BCHP_GIO_STAT_EXT_reserved0_SHIFT 6
/* GIO :: STAT_EXT :: irq_status [05:00] */
#define BCHP_GIO_STAT_EXT_irq_status_MASK 0x0000003f
#define BCHP_GIO_STAT_EXT_irq_status_SHIFT 0
#define BCHP_GIO_STAT_EXT_irq_status_DEFAULT 0x00000000
#endif /* #ifndef BCHP_GIO_H__ */
/* End of File */