/*
 * OF helpers for network devices.
 *
 * This file is released under the GPLv2
 *
 * Initially copied out of arch/powerpc/kernel/prom_parse.c
 */
#include <linux/etherdevice.h>
#include <linux/kernel.h>
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/export.h>

/**
 * It maps 'enum phy_interface_t' found in include/linux/phy.h
 * into the device tree binding of 'phy-mode', so that Ethernet
 * device driver can get phy interface from device tree.
 */
static const char *phy_modes[] = {
	[PHY_INTERFACE_MODE_NA]		= "",
	[PHY_INTERFACE_MODE_MII]	= "mii",
	[PHY_INTERFACE_MODE_GMII]	= "gmii",
	[PHY_INTERFACE_MODE_SGMII]	= "sgmii",
	[PHY_INTERFACE_MODE_TBI]	= "tbi",
	[PHY_INTERFACE_MODE_REVMII]	= "rev-mii",
	[PHY_INTERFACE_MODE_RMII]	= "rmii",
	[PHY_INTERFACE_MODE_RGMII]	= "rgmii",
	[PHY_INTERFACE_MODE_RGMII_ID]	= "rgmii-id",
	[PHY_INTERFACE_MODE_RGMII_RXID]	= "rgmii-rxid",
	[PHY_INTERFACE_MODE_RGMII_TXID] = "rgmii-txid",
	[PHY_INTERFACE_MODE_RTBI]	= "rtbi",
	[PHY_INTERFACE_MODE_SMII]	= "smii",
	[PHY_INTERFACE_MODE_XGMII]	= "xgmii",
	[PHY_INTERFACE_MODE_MOCA]	= "moca",
};

/**
 * of_get_phy_mode - Get phy mode for given device_node
 * @np:	Pointer to the given device_node
 *
 * The function gets phy interface string from property 'phy-mode',
 * and return its index in phy_modes table, or errno in error case.
 */
int of_get_phy_mode(struct device_node *np)
{
	const char *pm;
	int err, i;

	err = of_property_read_string(np, "phy-mode", &pm);
	if (err < 0)
		return err;

	for (i = 0; i < ARRAY_SIZE(phy_modes); i++)
		if (!strcasecmp(pm, phy_modes[i]))
			return i;

	return -ENODEV;
}
EXPORT_SYMBOL_GPL(of_get_phy_mode);

/**
 * Search the device tree for the best MAC address to use.  'mac-address' is
 * checked first, because that is supposed to contain to "most recent" MAC
 * address. If that isn't set, then 'local-mac-address' is checked next,
 * because that is the default address.  If that isn't set, then the obsolete
 * 'address' is checked, just in case we're using an old device tree.
 *
 * Note that the 'address' property is supposed to contain a virtual address of
 * the register set, but some DTS files have redefined that property to be the
 * MAC address.
 *
 * All-zero MAC addresses are rejected, because those could be properties that
 * exist in the device tree, but were not set by U-Boot.  For example, the
 * DTS could define 'mac-address' and 'local-mac-address', with zero MAC
 * addresses.  Some older U-Boots only initialized 'local-mac-address'.  In
 * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
 * but is all zeros.
*/
const void *of_get_mac_address(struct device_node *np)
{
	struct property *pp;

	pp = of_find_property(np, "mac-address", NULL);
	if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
		return pp->value;

	pp = of_find_property(np, "local-mac-address", NULL);
	if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
		return pp->value;

	pp = of_find_property(np, "address", NULL);
	if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
		return pp->value;

	return NULL;
}
EXPORT_SYMBOL(of_get_mac_address);